AJA IPR-10G-HDMI Single Channel SMPTE 2110 Video And Audio IP Decoder To HDMI 1.4B (HD)

Description

The IPR-10G-HDMI is a SMPTE ST 2110 to HDMI converter suited for point-of-use applications including source monitoring, digital signage, and video walls. The IPR-10G-HDMI decodes SMPTE ST 2110 streams then formats the data for output on a full-size HDMI 1.4 interface. The audio associated with the video stream is extracted, synchronized, and then embedded into the HDMI signal as well as output on an analog RCA audio interface.

IPR-10G-HDMI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for display on HDMI devices. It's rugged, fanless, Mini-Converter design is ideal for placement in a wide range of display scenarios, from studios to field.

Key Features

• Essence support: SMPTE ST 2110
• 1x SFP+ Cage for 10000 Base-T Ethernet media input (SFPs not included)
• Network (LAN) control and status including Link/Activity light
• Quick network setup with AJA eMini-Setup software
• Full-size HDMI 1.4 video output
• Audio out available via embedded HDMI and analog RCA
• Full 10-bit pixel processing pipeline
• Rugged, fanless, portable design

Monitor ST 2110 Video and Audio from anywhere on the Network
The IPR-10G-HDMI is a SMPTE ST 2110 to HDMI Mini-Converter suited for point-of-use applications including source monitoring. The AJA IPR-10G-HDMI receives SMPTE ST 2110 IP video and audio, then formats the data for output on a full size HDMI 1.4b interface.

The audio associated with the video stream is extracted, synchronized, and then embedded into the HDMI interface as well as output on an analog RCA interface.

With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide HDMI monitoring at the destination.

Workflow
IPR-10G-HDMI provides HDMI output from SMPTE ST 2110 video and audio over IP compatible devices. Combine your IPR-10G-HDMI units with AJA KONA IP (I/O card for use in desktop workstations) to instantly create a real-world ST 2110 workflow for video over IP production and monitoring.

User Control
IPR-10G-HDMI provides two key methods for control. The Control LAN Ethernet port enables control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates.

• 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
• HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
• Web and REST clients supported
• 1x USB 2.0 Mini-B (IEC 62680-1) connector
• AJA eMini-Setup of network parameters

Compact and Portable
AJA Mini-Converters are small enough to fit behind a monitor, in the back of a rack or directly on a camera rig. A locking power connector can't accidentally pull loose and an optional P-TAP power cable allows for battery power in remote locations.