APC Smart-UPS 1500VA LCD Rack Mount 2U (230V) has been discontinued, here are some related products you might like:
APC Smart-UPS 1500VA LCD Rack Mount 2U (230V)
Features
- Output: 1000W / 1500VA
- Input: 230V
- 4 x Battery-Powered Outlets
- 4 x IEC 320 C13, 2 x IEC Jumpers
- Recharge Time 3 Hours
Description
The APC Smart-UPS 1500VA LCD Rack Mount 2U (230V) offers efficient network power protection to your servers, point-of-sale, routers, switches, hubs, and other network devices. With Automatic Voltage Regulation, the unit offers higher application availability by correcting low and high voltage conditions without utilising the battery. Its intuitive LCD interface offers precise data in multiple languages along with the ability to configure the equipment locally with easy to use navigation keys. Additionally, the unit features a Green operating mode that bypasses unused electrical components in good power conditions to attain high operating efficiency without compromising with any protection.
With an intelligent battery management, the APC Smart-UPS 1500VA LCD Rack Mount 2U (230V) maximises battery performance, life, and reliability via precision charging. The unit houses a power condition that offers protection for connected loads from surges, spikes, lightning, and other power disturbances. It boasts temperature-compensated battery charging capability to enhance battery life by controlling the charge voltage as per battery temperature. Apart from battery failure notification, the Smart-UPS also conducts a periodic battery self-test to ensure early detection of a battery that needs to be replaced. It comes with pure Sinae wave output on battery that simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Featuring an automatic self-test, the Smart-UPS automatically starts up the connected equipment upon the return of utility power and restarts loads after it is shutdown. With network manageability, the unit provides remote management over the network. It features audible alarms that actively inform you whether the unit is on battery, the battery is low, or if there is an overload condition. The equipment has an energy metre that displays actual kilowatt hours of usage.
Through LED status indicators, the Smart-UPS updates you on the unit and power status. In addition to serial connectivity for managing the UPS via a serial port, the unit has USB connectivity that enables you to manage the UPS via a USB port. Hot-swappable batteries ensure clean, uninterrupted power to protect equipment while batteries are being replaced. The UPS comes with resettable circuit breakers for a quick recovery from overloaded events.
The Smart-UPS X 1500 VA Rack/Tower LCD 230 V has a single switched outlet group that can be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. High on online efficiency, the UPS reduces utility costs and generates less heat. The SmartSlot customises UPS capabilities with management cards. As the unit is cold-start capable, it offers temporary battery power when the utility power is out.
With adjustable voltage-transfer points, Smart-UPS widens the input voltage window or tightens the output voltage regulation for maximising useful battery life. You can also use this equipment for optimal performance with adjustable voltage sensitivity in some specific power environments or generator applications. The unit has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Features
Network Power Protection
Offers efficient network power protection to your servers, point-of-sale, routers, switches, hubs, and other network devices
AVR
Automatic Voltage Regulation - provides higher application availability by correcting low and high voltage conditions without utilising the battery
LCD Interface
Intuitive LCD interface - offers precise data in multiple languages along with the ability to configure the equipment locally with easy to use navigation keys
Battery Management
Intelligent battery management - maximises battery performance, life, and reliability via precision charging
Protected Power
Power condition - offers protection for connected loads from surges, spikes, lightning, and other power disturbances
LED Status
LED status indicators - update you on the unit and power status
4 x IEC 320 C13
Single switched outlet group - can be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding
Alarmed
Audible alarms to send notifications of changing utility power and UPS conditions
Circuit Breakers Reset
Resettable circuit breakers for a quick recovery from overloaded events
SmartSlot
SmartSlot - customises UPS capabilities with management cards
Cold Start
Cold-start capability - offers temporary battery power when the utility power is out
Specifications
Output | Output Power Capacity: 1000 W / 1500 VA Max Configurable Power: 1000 W / 1500 VA Nominal Output Voltage: 230 V Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage Output Voltage Distortion: Less than 5% at full load Output Frequency (sync to mains): 57 - 63 Hz for 60 Hz nominal Waveform Type: Sinae wave Output Connections: (4) IEC 320 C13 (2) IEC Jumpers |
Input | Nominal Input Voltage: 230 V Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing) Input Connections: IEC-320 C14 Input voltage range for main operations: 160 – 286 V Input voltage adjustable range for main operations: 151 – 302 V |
Batteries & Runtime | Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 3 hour(s) RBC Quantity: 1 |
Communications & Management | Interface Port(s): RJ-45 Serial, SmartSlot, USB Available SmartSlot Interface Quantity: 1 Control Panel: Multi-function LCD status and control console Audible Alarm Alarm when battery: distinctive low Battery alarm: configurable delays Emergency Power Off (EPO): Optional |
Surge Protection and Filtering | Surge Energy Rating: 459 Joules Filtering: Full time Multi-pole noise filtering: 0.3% IEEE Surge let-through: zero clamping response time Meets UL 1449 |
Physical | Rack Height: 2U Colour: Black Dimension (W×H×D): 432 × 89 × 457 mm Nett Weight: 28.64 kg |
Environmental | Operating Environment: 0 to 40° C Operating Relative Humidity: 0 - 95% Operating Elevation: 0-3000 m Storage Temperature: -15 to 45° C Storage Relative Humidity: 0- 95% Storage Elevation: 0-15000 m Audible noise at 1 m from surface of unit: 46 BA Online Thermal Dissipation: 90 BTU/hr |
Conformance | Regulatory Approvals C-tick,COE,EN 50091-1,EN 50091-2,TUV,VDE Environmental Compliance: RoHS 7b Exemption,REACH: Contains No SVHCs |
In The Box
- Rack Mounting Support Rails
- Smart Ups Signalling Rs-232 Cable
- USB Cable
- Installation Guide
- Documentation CD
- CD with Software
- Standard Warranty: 3 Years Repair or Replace (Excluding Battery) and 2 Year for Battery
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: APC Smart-UPS 1500VA LCD Rack Mount 2U (230V)
- Manufacturer: APC
- Model: SMT1500RMI2U
- SKU: SMT1500RMI2U
- RM Product #: 47805