AVPro Edge 4K HDMI Extender via Optical Fiber
Features
- HDMI 2.0 (a/b)
- 18Gbps Bandwidth Support (Using ICT)
- Up to 4K60 4:4:4 Support
- Full HDR Support (HDR 10 & 12 Bit)
- HDR, HDR10+ and HLG Support
- Dolby Vision Support
- 4K --> 1080P Down-scaling for mixed systems
- EDID Management and EDID emulate
Description
The AVPro Edge 4K HDMI Extender via Optical Fiber is allowing the user to extend a 18Gbps HDMI signal 2 kilometers via single-mode fiber, and up to 300 meters using multi-mode fiber. Using ICT (Invisible Compression Technology) we have achieved what was thought to be impossible. We can deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR Metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and color shifting. You can go even further by installing your own SFP port. It solves problems for both commercial and residential markets for distributing high value 4K 18Gbps content from rack to display. These extenders go the distance, no need to find power and cascade extenders for ultra-long runs. Additionally AC-EXO-444-KIT offers solutions for 18Gbps distribution in residential, digital entertainment centers, retail stores, AV events that require reliable and long distance distribution, suitable for Data Center, Control Rooms, Conference Rooms, Schools and Corporate Training environment
Features
Extend 4K 60 4:4:4 and HDR Signals
Distance is no longer an obstacle. By using the AC-EXO-444-KIT you can go virtually any distance you require. The pre-installed SFP (Small Form-factor Pluggable transceiver) supports up to 2 km (1.25 Miles) when using a single strain of single-mode fiber or 300m (1000ft) on a single strain of readily available OM3 Multi-mode fiber. You can go even further by replacing the SFP. SFP's are a staple in Fiber Optics today and are readily available - If you need help selecting an SFP, just contact us!Down Scaling
The AC-EXO-444-KIT has a scaling circuit built into the transmitter. The scaler can scale 4K (and HDR) --> 1080P. A common application for this is when you have a 4K distribution and you have one or two displays that are older. You can use the extender to scale down where you need to and not have to reduce the entire system. The AC-EXO-444-KIT does the heavy lifting, eliminating the need to add additional boxes. This is an ideal choice for extension for projects requiring an 18G matrix like the AC-MX1616-AUHD.Total EDID Management
The AC-EXO-444-KIT has robust EDID control. EDID management allows you to manage the input device and request specific video resolutions and/or audio codecs. the following EDID options are available:EDID Bypass
1080P 2CH Audio
1080P 8CH Audio
4K60 4:2:0 2CH Audio
4K60 4:2:0 8CH Audio
4K60 4:4:4 HDR 2CH Audio
4K60 4:4:4 HDR 8CH Audio
USER EDID – EDID Copy
The EDID Copy Function allows you to copy and save from any display or projector you want to.On Board Troubleshooting
This unit allows you to generate a 1080P or 4K test pattern to identify external problems (source, repeater, displays, etc...). You can now be sure that your wiring is correct and get to the bottom of problems quickly should they arise, without having to worrying if the source or sink is working properly. You can generate a test pattern from the Tx or the Rx so you can verify total system infrastructure integrity.Total ARC Management
With Total ARC (Audio Return Channel) Management you can route audio from local displays back to the rack or head end for further distribution in a distributed audio system. With the AC-EXO-444-KIT you can manage ARC in two ways: Use Toslink from the display ran into the Rx unit and then extract from the Toslink port on the Tx (recommended) Use the ARC HDMI port on the display and the extract from the Toslink port on the TxFuture Proof
Using Fiber Optic infrastructure is the only way to future proof an installation, now you can run fiber in confidence and use the AC-EXO-444-KIT to deliver 18Gbps to your customers!IR & RS232 Management
IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa. In addition you can use the I-PASS port to plug you Control System emitter ports directly into the IR (I-PASS) port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, our unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the electronics inside.
Application
- Point to point HDMI extension – flat panel in BR# 1 to STB in basement – makes for a very clean install.
- As an add-on to any matrix switch for long distance zone coverage.
- To carry the control signals (IR/RS232) for third party control integration for turning components on and off and switching channels, etc.
- For retrofit jobs where there is category cable already run and re-engineering is not an option.
- Cascade for ultra long distances
Specifications
Video | |
Video Resolutions | to 4K 60Hz 4:4:4 |
VESA Resolutions | Up to DCI 4K (4096x2160) |
HDR Formats/Resolutions | 420, 422, 444 (10 and 12 Deep Color) HDR10, HDR10+, HLG, Dolby Vision |
Color Space | YUV (Component), RGB (CSC: Rec. 601, Rec. 709, BT2020, DCI, P3 D6500) |
Chroma Subsampeling | 4:4:4, 4:2:2, 4:2:0 Supported |
Deep Color | Up to 16 bit (1080), Up to 12 bit (4K) |
Audio | |
Audio Formats Supported HDMI | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, DTS-X, Dolby Atmos |
Audio Formats Supported Extracted: Transmitter (Toslink Out) | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus (No Downmixing) - Extract Local or ARC |
Audio Formats Supported: Receiver (Toslink Input) | PCM 2.0 Ch, LPCM 5.1 & 7.1, Dolby Digtal, DTS 5.1, Dolby Digital Plus (No Downmixing) - Input for ARC |
ARC (Audio Return Channel) | Via Toslink or HDMI |
Fiber | |
Type | Multimode (OM3 Recommended) or Singlemode |
Connector | LC (Lucent) |
Recommend Fiber | Cleerline SSF |
SFP (Small Form-factor Pluggable Transceiver) | Universal and changeable - 300m/2km built in. |
Distance | |
OM3 Multi-mode (Full 4K) | 300M (1000 Feet) |
Single-mode (Full 4K) | 2KM (1.25 Miles) |
HDMI Lead In/Out (up to 4K60 4:4:4) | Up to 15m (Bullet Train HDMI) |
HDMI Lead In/Out (w/ AOC Cable) (up to 4K60 4:4:4) | Up to 40m (w/ Bullet Train AOC) |
Other | |
Bandwidth | Beyond 18 Gbps |
HDCP | HDCP 2.2 and Earlier |
Ports | |
HDMI (Tx & RX) | Type A |
Audio (extracted/embedded) (Tx & RX) | Toslink |
IR Tx (Tx & RX) | 3.5mm Mono (2 Conductor) |
IR Rx (Tx & RX) | 3.5mm Stereo (3 Conductor) |
RS232 (Tx & RX) | 3 pin terminal block |
Power (Tx & Rx) | 2 pin terminal block |
Environmental | |
Operating Temprature | -5 to 51°C |
Storage Temperature | -20 to 60°C |
Humidity Range | 5-90% RH (No Condensation) |
Power | |
Power Consumption (Total) | 9 Watts Max Pair |
Power Supply | Input: AC 100-240V ~ 50/60Hz Output: DC 48V .5A (Wall Version) |
Dimensions | |
Dimensions (Single Unit Only, Tx or Rx each alone) | 131 x 85 x 21 |
Dimensions (Packaged Length/Width/Height) | 138 x 165 x 91 |
Weight (Unit, Tx or Rx each alone) | 0.13kg |
Weight (Packaged) | 0.90kg |
In The Box
- AC-EXO-444-TX (Transmitter)
- AC-EXO-444-RX (Receiver)
- 2x 48V Power Supply
- 1 x IR Tx Unit
- 1 x IR Rx Unit
- Mounting Ears
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: AVPro Edge 4K HDMI Extender via Optical Fiber
- Manufacturer: AVPro Edge
- Model: AC-EXO-444-KIT
- SKU: AC-EXO-444-KIT
- RM Product #: 60991