- 2 Input/2 Output
- RCA Phono I/O
- Optical S/PDIF Output
- Includes Software Applications
- Mac OS, Windows
- Product: #2322
- SKU: BEUCA222
The U-CONTROL UCA222 from Behringer is a low-cost solution for getting audio in and out of a computer. The USB 1.1 interface is USB bus powered and features two analogue RCA phono inputs for connecting any line-level device, such as a mixer or tape deck, and two analogue RCA phono outputs for connecting active speakers or studio monitors.
The interface also provides a stereo S/PDIF output on an optical connector. Headphone monitoring is via a stereo mini-jack with a dedicated volume control. No special setup or additional drivers are required, and wide computer operating system compatibility is available for both the Mac and Windows platforms. The interface includes a large selection of audio software.
- USB 1.1 audio interface for connecting instruments, a mixer, consumer audio components with a computer for recording and playback
- Stereo headphone output with dedicated level control allows for monitoring both input and output
- Optical S/PDIF output for direct digital conversion
- Includes energyXT2.5 Behringer Edition music production software, an audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Includes Tracktion 4 audio production software via download
- No additional drivers required
- Powered via USB - no external power supply needed
|Sample Rates||32, 44.1 and 48 kHz|
|Analogue Input||2 x RCA phono|
|Analogue Output||2 x RCA phono
1 x 1/8" TRS stereo mini Headphone
|Digital Output||1 x TOSLink optical S/PDIF|
|THD + N||0.05% typical @ -10 dBV, 1 kHz|
|Dynamic Range||Not specified by manufacturer|
|Frequency Response||10 Hz to 20 kHz, +/-1.0 dB @ 44.1 kHz|
|Power Requirements||USB bus|
G3 300 MHz or higher
OS 9.0.4 or higher, 10.x or higher
Minimum 128 MB RAM
USB 1.1 port
Intel or AMD CPU 400 MHz or higher
Minimum 128 MB RAM
USB 1.1 port
|Dimensions (WxDxH)||88 x 60 x 22 mm|
Australian Shipping Via DHL
DHL offers a great express shipping service to Australia from New Zealand. We are proud to be able to offer express shipping to main cities on the east coast of Australia, within the same timeframe ( If not quicker ) than local Australian courier companies. Prior to the Covid-19 outbreak, service standards for these main centers was overnight. However these services have been impacted greatly, and as such the overnight service has been suspended. Overnight shipping will likely resume once things have returned to normal.
Qualifying main centers include:
Whilst this service is extremely efficient and will likely be delivered within 1-2 days 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it doesn’t arrive within the specified time frame, in most cases it will be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcel boxes etc.