Cinegears 6-601 Ghost-Eye 600T Wireless HD & SDI Video Transmitter

Description

The Cinegears 6-601 Ghost-Eye 600T Wireless HD & SDI Video Transmitter transmits uncompressed HD video and audio up to 3280' (1000m). It comes with added security encryption that ensures no data is lost during transmission. With both 3G and HDMI inputs and outputs, using frequencies between 5.1 to 5.9 GHz as needed (up to four simultaneously), you can utilise the video transmission for professional applications. The Ghost-Eye wireless video receiver is required at the receiving end for full feature utilisation. This transmitter can support up to four receivers and can be arranged in point-to-point and point-to-multi-point networks.

Features

• Uses licence-free 5 GHz ISM frequency band, maximum four frequency channels with automatic or manual selection, coexists with Wi-Fi
• Supports wireless 10-bit HD video and audio with no compression and no delay up to 3280'/1000m (line-of-sight)
• Supports timecode, LUTs, start/stop sync, and tally for broadcast or live event streaming production
• Uncompromised picture quality with low latency less than 1 ms
• Supports point-to-point, and point-to-multipoint network topology
• Supports up to four receivers
• Cross compatible with Ghost-Eye 100M, 150M, 300M, 400M and 600T transmitters and receivers
• High resolution, 10-bit colour depth 4:2:2, 1080p 60 fps HDMI and 3G/HD/SD-SDI input and output
• Supports HDMI to SDI cross-conversion
• Built-in talk back microphone and headphone
• Supports professional audio formats include Dolby True HD, DTS-master, and more
• Accepts SDI/HDMI input from digital cinema cameras, HD SDI video cameras, and other digital devices
• AES-128/256 encryption with air interface HD video data stream
• Auto-Relink signals dropped due to interference or loss of line-of-sight are automatically reconnected within 1 ms of the obstacle being removed
• Small obstacles in line-of-sight are accommodated with an adaptive signal logarithm for continuous signals
• HDMI 1.4 with EDID support
• Built-in, ultra-silent intelligent fan prevents heat and moisture damage
• Supports wide-range power voltage input, adapts most kinds of camera batteries with optional V-Mount, Gold mount (Anton Bauer), or 1/4" bolt mount battery plates
• Four high-sensitivity, omnidirectional external antennas with RPSMA socket
• Supports all input and output ports with ±8 kV ESD protection level (HBM, contact discharge)
• Plug-and-play hardware design without need for software, firmware upgradable via mini USB port
• Professional standard two-pin Lemo power plugs
• Built-in LCD screen displays for device and signal status
• Waterproof, mist-proof, shockproof production case with foam insert available separately for travelling