DJI Matrice 600 Hexacopter
Features
- Works with Zenmuse Gimbals / Cameras
- Works with Ronin-MX Gimbal
- Up to 15 kg Total Take-Off Weight
- Integrated Lightbridge 2 Support
- Full HD 1080p Live Monitoring
Description
Supporting a total takeoff weight of 15 kg, the Matrice 600 (M600) is a hexacopter from DJI designed for professional video and industrial imaging applications. It is centred around DJI's advanced A3 flight control system and incorporates the Lightbridge 2 system for HD resolution, low-latency monitoring via SDI, HDMI, and USB outputs on the controller. For camera support, the M600 works with Zenmuse Z15 series gimbals, the Ronin-MX gimbal, and Zenmuse X Series gimbal/camera hybrids.
The M600 comes almost-ready-to-fly (ATF), including controller (transmitter), flight batteries, charger, flight controller, and sundries. Additional hardware needed may include a gimbal, camera, as well as any flight controller add-ons. Some assembly is required.
Performance
Intelligent Drive System
The M600 uses Sinae-wave driven, intelligent ESCs to ensure it performs accurately, safely, and efficiently, while the A3 flight controller's self-adaptive systems adjust flight parameters automatically based on different payloads
Air System Design
Modular Design
The modular design makes the Matrice 600 easy to set up and ready to use
Gimbal Compatibility
All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 6 kg allows it to fly the Ronin-MX gimbal and a range of cameras, from Micro Four Thirds systems to the RED EPIC
Built to Last
A dust-proof propulsion system simplifies maintenance, while actively cooled motors make for reliable operation for extended periods of time
A3 Flight Controller
GNSS-based A3 acts as the brains of the aircraft. Using data from the GPS, compass, and various sensors, it provides navigation a stabilisation with varying degrees of autopilot redundancy, depending on user settings. An array of expansion ports allows you to connect optional DJI and third-party equipment
DJI GO App for iOS and Android
The M600 supports the DJI GO app as well as the DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control centre for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator
Extended Range
The Matrice 600's radio range extends to 5 km with a clean signal
A3 Pro Upgrade
The separately available A3 Pro upgrade brings triple redundancy to the Matrice 600's flight controller. It features diagnostic algorithms that compare sensor data from the three sets of units in real-time, helping ensure the aircraft flies as expected, especially important in professional filmmaking and industrial environments
D-RTK GNSS Upgrade
The A3 GNSS system can be upgraded with separately available Real-Time Kinematic technology (RTK) for even greater navigational accuracy. Using dual antennas, RTK provides greater precision than a compass and is not susceptible to magnetic interference from metal structures
Lightbridge 2
Professional HD Transmission
DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI, and 3G-SDI ports on the controller support video output at up to 1080p/60 fps or a broadcast standard output of 720p/59.94 fps and 1080i/50 fps
DJI SDK
The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices, including the Guidance sensor system, the RTK GNSS units, or third party components of your choice
Specifications
Performance | |
Maximum Speed | Horizontal (No Wind): 18 m/s Ascent: 5 m/s Descent: 3 m/s |
Maximum Wind Resistance | 8 m/s |
Maximum Altitude | Above Sea Level: 2500 m |
Hovering Accuracy | P-Mode with GPS: Vertical: ±0.5 m Horizontal: ±1.5 m |
Maximum Angular Velocity | Pitch: 300°/s Yaw: 150°/s |
Maximum Pitch Angle | 25° |
Hovering Time | Six TB47S Batteries: No payload: 35 minutes 6 kg Payload: 16 minutes Six TB48S Batteries: No payload: 40 minutes 5.5 kg payload: 18 minutes Note: Hovering time is based on flying at 10 m above sea level in a no-wind environment and landing with 10% battery level. |
Takeoff Weight | Up to 15.1 kg |
Flight Control System | |
Model | A3 |
Transmitter | |
Frequency | 5.725 to 5.825 GHz 2.400 to 2.483 GHz |
Communication Distance | 5 km |
Transmitter Power | 13 dBm at 5.8 G 20 dBm at 2.4 G |
Connectivity | 1 x HDMI 1 x SDI 1 x USB |
Dual User Capability | Master-and-slave control |
Output Power | 9 W |
Operating Temperature | -10 to 40°C |
Battery | Type: Built-in Chemistry: Lithium-ion polymer (LiPo) Capacity: 6000 mAh Configuration: 2S |
Storage Temperature | < 3 Months: -20 to 45°C > 3 Months: 22 to 28°C |
Charging Temperature | 0 to 40°C |
Mobile Device Holder | Supports smartphones and tablets Maximum Tablet Width: 170 mm |
Gimbal | |
Supported Gimbals | Zenmuse X Series: X3, X5 & X5R, XT Ronin Series: Ronin-MX Z15 HD Series: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4 |
Flight Battery | |
Model | TB47S |
Chemistry | Lithium-ion polymer (LiPo) |
Capacity | 4500 mAh 99.9 Wh |
Configuration | 6S |
Weight | 595 g |
Maximum Charging Power | 180 W |
Operating Temperature | -10 to 40°C |
Charging Temperature | 5 to 40°C |
Storage Temperature | < 3 Months: -20 to 45°C > 3 Months: 22 to 28°C |
Charger | Model:A14-100P1A Voltage Output: 26.3 V Power Rating: 100 W |
Motor | |
Model | DJI 6010 |
Propeller | |
Model | DJI 2170 |
General | |
Operating Temperature | -10 to 40°C |
Diagonal Wheelbase | 1133 mm |
Dimensions | Propellers, Frame Arms, and GPS Mount Unfolded: 1668 x 1518 x 759 mm Frame Arms and GPS Mount Folded: 640 x 582 x 623 mm |
Weight | Six TB47S Batteries: 9.1 kg Six TB48S Batteries: 9.6 kg |
In The Box
- Centre Frame (Includes A3 and Lightbridge 2)
- 6 x Frame Arm with Propeller Holder
- 2 x Landing Gear Leg
- Landing Skid
- Left Retractable Module
- Right Retractable Module
- 2 x Retractable Module Mounting Rod
- 2 x Retractable Module Bracket
- Radio Controller (Transmitter)
- 6 x TB47S Flight Battery
- 2 x Charging Hub
- 2 x Spring
- 2 x Battery Charger
- AC Power Cable for Charger
- Micro-USB Cable
- GPS-Compass Pro
- GSP Mount
- 6 x Arm Stopper
- Landing Gear Stopper
- 6 x Knob with Gasket
- Screws Set
- Double Sided Tape Set
- Tape
- Battery Stickers
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DJI Matrice 600 Hexacopter
- Manufacturer: DJI
- Model: DJM600
- SKU: DJM600
- RM Product #: 33374