DPA Microphones 4017B-R Professional Shotgun Microphone with Rycote Windshield has been discontinued, here are some related products you might like:
DPA Microphones 4017B-R Professional Shotgun Microphone with Rycote Windshield
Overview
Description
The DPA 4017B-R Shotgun Microphone includes the Rycote windjammer, windshield, suspension mount, XLR holder and brush for complete protection against wind noise during field recording. The professional and versatile 4017B microphone is designed for demanding sound capturing in film, video, sound reinforcement and even music recording.
The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.
The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction. Two onboard filters eliminate noise and artifacts with a 4dB shelf at 8kHz and a first-order bass roll-off below 120Hz. The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.
Key Features
Wide Frequency Response and Excellent Clarity
- The 4017B's frequency response, dynamic range, and signal-to-noise ratio result in pristine, transparent signal reproduction.
Superb Off-Axis Rejection
- The supercardioid, lobe-shaped polar pattern is coupled with excellent off-axis signal rejection for a focused pickup, enhanced range and minimal noise, etc.
Short and Lightweight Profile
- The short, lightweight profile of the 4017B make it a suitable choice for both indoor and outdoor production with boompoles, handheld shock-mounts, etc.
Specifications
Transducer |
Pre-Polarized Condenser |
Polar Pattern |
Supercardioid with Interference Tube |
Frequency Response |
70Hz - 20kHz, permanent third order high pass filter at 50Hz (+/-2dB) |
Sensitivity |
nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa |
EIN |
A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A)) Noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB) |
Dynamic Range (Typical) |
Typ. 119 dB |
Signal-to-Noise Ratio |
Typ. 80dB (A) |
THD |
< 1 % up to 133 dB SPL peak |
Phantom Power |
48V Phantom power (± 4V) |
Common Mode Rejection |
> 40dB |
Maximum Input Sound Level |
152dB |
Power Requirements |
48V Phantom Power Current Consumption: 4.5mA Output Voltage: > 1.8V |
Output Impedance |
> 150 ohms |
Output Connectors |
3-pin XLR Cable Drive: 328' (100m) |
Pad |
No |
Low Frequency Roll-Off |
Permanent third order high pass filter at 50Hz |
Temperature |
-40 ° to 45 °C (14 ° to 113 °F) |
Relative Humidity |
Up to 90% |
Dimensions |
8.3 x 0.75" (212 x 19mm) (Length x Diameter) |
Weight |
68g (2.4 oz) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: DPA Microphones 4017B-R Professional Shotgun Microphone with Rycote Windshield
- Manufacturer: DPA Microphones
- Model: 4017B-R
- SKU: 4017B-R
- RM Product #: 20639