Focusrite Pro RedNet A8R - Dante Networked A-D and D-A Converter
Features
- Eight channels of line-level analogue input/output
- 24-bit Focusrite conversion up to 192 kHz
- Internally balanced throughout
- Dante-based remote-controlled audio-over-IP connectivity
- Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
Description
The RedNet A8R from Focusrite adds to the company's range of 1U Dante equipped interfaces with network and power supply redundancy. The unit provides eight channels of analogue input and output with high-quality 24-bit/192 kHz analogue-to-digital and digital-to-analogue audio conversion, plus two channels of AES/EBU digital input and output to and from the Dante network.
The electronically-balanced analogue audio inputs and outputs are available via DB25 connectors wired to AES59 specifications, with the internal signals balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, the two channels of AES digital input/output are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit can be internal, or external via Wordclock or DARS, with the unit also outputting Wordclock.
The convertor features power and network redundancy, with two separate universal (100~240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to redundant or switched (daisy-chain) mode.
Key Features:
- Eight channels of line-level analogue input/output
- 24-bit Focusrite conversion up to 192 kHz
- Internally balanced throughout
- Dante-based remote-controlled audio-over-IP connectivity
- Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
- Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU input/output
- Analogue input/output to AES59 standard on DB25 connectors
- Comprehensive front-panel indicators
- Software-based routing and control - no hardware patching required
Specifications
Analogue Inputs | Line Inputs: 8 Connectors: 1 x DB25 female, wired to AES59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.1 dB THD+N: <-100 dB (0.001%) unweighted, 20 Hz to 20 kHz; -1 dBFS input EIN: -96 dBu 'A'-Weighted (typical) SNR: 120 dB 'A'-Weighted (typical) Convertor Dynamic Range: 120dB 'A'-Weighted (typical), 10 Hz to 20 kHz |
Analogue Outputs | Line Outputs: 8 Connectors: 1 x DB25 female, wired to AES59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.1 dB THD+N: <-100 dB (0.001%) unweighted, 20 Hz to 20 kHz; +23 dBu input Noise in Presence of Signal: -94 dBu 'A'-Weighted (typical) Dynamic Range: 118 dB 'A'-Weighted (typical) Convertor Dynamic Range: 120 dB (typical), 10 Hz to 20 kHz |
Crosstalk | Input or Output to Input: <-100 dB unweighted, 20 Hz to 20 kHz; +23 dBu input Input or Output to Output: <-100 dB unweighted, 20 Hz to 20 kHz; -1 dBFS input |
Sample Rate Conversion | Sample Rate Range: 32 to 216 kHz Gain Error: -0.3 dB Dynamic Range: >138 dB THD + N: <-130 dB (0.00003%) Latency: 11 to 45 samples (network and sample rate dependant) |
Digital Performance | Sample Rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz (-4%/-0.1%/+0.1%/+4.167%) @ 24-bit Clock Sources: Internal or from Dante Network Master External Word Clock Range: Nominal sample rate +/-7.5% |
Digital I/O | Channel Count: 2 x 2 AES/EBU channels Input (optional DARS): 1 x XLR3F Output: 1 x XLR3M |
Wordclock | Input: 1 x BNC 75 Ohms (switchable termination) Output: 1 x BNC 75 Ohms |
Network | Connectors: 2 x etherCON connectors, also compatible with standard RJ45 connectors Redundant mode allows unit to connect to two independent networks Switched mode connects both ports to integrated network switch allowing daisy-chaining of devices |
Operating Temperature | Operates at up to an ambient temperature of 122°F (50°C) Single fan |
Power Requirements | 2 x IEC inputs with retaining clips 100~240 VAC, 50/60 Hz 24W consumption |
Dimensions | 19 x 12.8 x 1.7" (482 x 352 x 43 mm) |
Weight | 9.9 lb (4.5 kg) |
In The Box
- Focusrite RedNet A8R - Dante Networked A-D and D-A Converter
- AC Power Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Focusrite Pro RedNet A8R - Dante Networked A-D and D-A Converter
- Manufacturer: Focusrite
- Model: REDNET A8R
- SKU: REDNET A8R
- RM Product #: 44757
- Warranty: 3 year manufacturer warranty