Hollyland Syscom 3000 SDI/HDMI Transmitter & Receiver Set

Description

The Syscom 3000 Transmitter & Receiver Set from Hollyland provides uncompressed, long-range video transmission up to 1080p60 at distances up to 3000' (914m). Compatible with separately available Hollyland Cosmo transmitters, the Syscom 3000 system can be used in point-to-point or broadcast mode. The transmitter features a 3G-SDI input, a 3G-SDI loop-out for an onboard monitor, an HDMI input, and dual antennas. The flat-panel receiver has an internal antenna, an HDMI output, and dual 3G-SDI outputs.

This system offers a selection of channels 0 to 9. Audio support includes two-channel SDI/HDMI embedded audio input and output plus a 3.5mm jack on the transmitter for inputting analogue audio. Both the transmitter and the receiver can be powered via their 4-pin LEMO-type ports using D-Tap to LEMO cables connected to your camera battery or another D-Tap source.

The Syscom 3000 Transmitter & Receiver Set incorporates a 7-LED status display. The transmitter and receiver both accept a 7 to 36 VDC input range suitable for use with a wide range of batteries. Two transmitter antennas, one D-Tap to LEMO cable, one USB cable, one Allen key, and one tripod mount adapter are included with this set.

Key Features:

Transmission Range

Long-range transmission of up to 1080p60 video at distances up to 3000' (914m)

Transmitter

3G-SDI input and loop-out, HDMI input, 3.5mm analogue audio input; dual antennas

Receiver

Dual 3G-SDI outputs and HDMI output; built-in antenna

Channel Selection

0 to 4 channel selection within the USA, 0 to 9 channel selection outside USA

Firmware Upgrading

Firmware upgrades via mini-USB ports on transmitter and receiver

Uncompressed Video

No compression, no latency

Transmission Modes

Point-to-point and broadcast mode

Power Input

4-pin LEMO-type DC power input on both transmitter and receiver