JBL Control 16C/T 2-Way 6.5" Coaxial Ceiling Loudspeaker (White)
Features
- BGM Speakers for Retail, Lounges & More
- Coaxial Design
- 6.5"(165.1 mm) Cone Driver
- 0.75"(19 mm) Soft-Dome Tweeter
- Smooth Frequency Response On or Off Axis
Description
Styled in white, this pair of JBL Control 16C/T Speakers are designed to suit a variety of spaces, such as cafes, places of business, airport lounges, reception areas, court rooms, and more. They feature a 2-way coaxial design, giving you a 6.5"(165.1 mm) cone driver and a 0.75"(19.00 mm) soft-dome, liquid-cooled tweeter. With their coaxial construction, these speakers deliver a more consistent sound off-axis, which is a benefit for environments in which indirect listening takes place.
The drivers themselves are designed using a high-temperature anodised aluminium voice coil former and high-temperature voice coil to ensure a reliable performance throughout years of continuous use. Butyl rubber encloses the drivers, offering further durability, as well as sonic damping. The cone itself is resistant to both water and humidity. Thanks to a FEA-optimised motor construction, the Control 16C/T achieves a smooth frequency response.
Installation is made possible via the removable locking connector, within which you'll find screw terminals for wire termination, as well as loop-through points for furthering signal to more speakers. Dual conduit clamps employed to provide strain relief to both the input and loop-output cables. You can use the speaker to handle 8-Ohm loads, or as part of a 70 V / 100 V distributed loudspeaker system with a 30 W multi-tap transformer.
These speakers ship with two tile rail supports, as well as a C-ring support backing plate, cutout template, paint shield, and grille. On the top of the speaker you'll find a safety seismic attachment ring.
Features
- 100 W continuous programme power rating
- Components: 6.5" / 165.1 mm high-output driver with polypropylene cone and butyl rubber surround, and 0.75" / 19 mm soft-dome liquid-cooled tweeter
- Blind-mount backcan for quick and easy instal
- Dual conduit cable clamps
- Combined 70 V/100 V and low impedance direct operation
- 62 Hz to 20 kHz bandwidth with 110° conical coverage
- High 91 dB sensitivity
- Suitable for use in air handling spaces and as signalling speakers
Specifications
Frequency Range | 62 Hz to 20 kHz at -10 dB Half-space (flush mounted in ceiling) |
Frequency Response | 96 Hz to 15 kHz at ±3 dB Half-space (flush mounted in ceiling) |
Power Capacity | At Lo-Z: 100 W continuous programme power 50 W continuous pink noise Note: Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Programme Power is a conservative expression of the system's ability to handle normal speech and music programme material, and is defined as 3 dB above the Continuous Pink Noise Rating. |
Nominal Sensitivity | 91 dB Half-space (in ceiling) average 1 kHz to 16 kHz |
Nominal Coverage Angle | 110° conical coverageHalf-space (in ceiling) average 1 kHz to 16 kHz. |
Directivity | Directivity Factor (Q): 7.8 Directivity Index (DI): 8.2 dBHalf-space (in ceiling) average 1 kHz to 16 kHz. |
Maximum SPL | Rated: 108 dB @ 3.3' / 1.0 m average, 116 dB peak |
Nominal Impedance | 8 Ohms (in direct/bypass 8-Ohm setting) |
Transformer Taps | 30 W, 15 W, 7.5 W @ 70 or 100 V (plus 3.8 W @ 70 V only) |
Crossover | Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver |
Transducer | LF Driver: 6.5" / 165.1 mm with polypropylene cone, butyl rubber surround, anodised aluminium voice coil former, high-temperature voice coil HF Driver: 0.75" / 19.00 mm, highly damped treated-silk dome, Kapton voice coil, liquid cooling, wide dispersion waveguide |
Input Connector | Removable locking 4-pin connector with screw-down terminals. Maximum wire size 12 AWG (2.5 mm2) |
Wiring | Connector: Pin 1 = + In Pin 2 = - In Pin 3 = + Loop Through Pin 4 = - Loop Through |
Strain Relief | For 2 cables or 2 flex conduits via coupled clamping mechanism |
Materials | ABS baffle with UL94-V0 and UL94-5VB flame class fire rating Zinc-plated steel backcan |
Safety Agency Approvals | UL1480, UL2043, NFPA90, and NFPA70; S7232/UL Listed Transformer UL registered per UL1876; ROHS, C-tick N108, COE compliant Baffle meets UL94-V0 and UL94-5VB flammability rating In accordance with IEC60849/EN60849 systems |
Attachment | Safety Seismic: One point, top surface |
Ceiling Cutout Size | Circular cutout with 8.8" / 223.5 mm diameter (cardboard cutout template included) |
Ceiling Thickness | Up to 1.5" / 38.1 mm with stock dog-ears MTC-TCD thick-ceiling dog-ears sold separately for up to 2.4" / 60.9 mm ceiling thicknesses |
Dimensions (Ø x D) | Each Speaker: 10.0 x 8.8" / 253 x 225.0 mm Depth measured from back of the baffle |
Weight | Each Speaker: 3.4 kg |
In The Box
- JBL Control 16C/T 2-Way 6.5" Coaxial Ceiling Loudspeaker (White)
- 2 x C-Ring Support Backing Plates
- 4 x Tile Support Rails for 2' or 600 mm Tile Spans
- 2 x Cardboard Cutout Templates
- 2 x Paint Shields
- 2 x Removable Locking Multi-Pin Connectors
- 2 x Grilles
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: JBL Control 16C/T 2-Way 6.5" Coaxial Ceiling Loudspeaker (White)
- Manufacturer: JBL
- Model: CONTROL 16C/T
- SKU: CONTROL 16C/T
- RM Product #: 34782