JBL Control 28-1 High Output Indoor/Outdoor Background/Foreground Speaker (Black)

Product #34830 | SKU CONTROL 28-1 | JBL
Contact us for an ETA what does this mean?
Not currently for sale
Contact us for more information
Contact us for an ETA what does this mean?

Features

  • 8"(20.3 cm) Woven-Fibreglass LF Drivers
  • 1"(2.5 cm) PEI Diaphragm Tweeters
  • 240 W RMS at 8 Ohms
  • Durable, Weatherised Enclosures
  • InvisiBall Mounting Hardware

Description

Designed by JBL, these Control 28-1 loudspeakers are two-way 8"(20.3 cm) indoor/outdoor monitors featuring weather-protected circuitry, natural and powerful representations of the frequency spectrum, black enclosures, and JBL's proprietary InvisiBall mounting hardware. This hardware allows you to instal the speakers through a hidden access point behind its logo badge. As such, the Control 28-1 suitable for venues, health clubs, theme parks, cafes, or anywhere where foreground/background music—and paging—is a necessity.

These monitors are capable of handling 240 W of programmatic material at 8 Ohms, and feature a built-in multi-tap transformer for operation on distributed speaker lines. With an SPL of 112 dB, you can blast these speakers pretty loudly as well, while their cone geometry ensures a pleasurable listening experience in both on- and off-axis situations. Additionally, their PEI diaphragms render a smooth high-frequency response. But sound is not the only consideration: Kapton voice coil formers, JBL's WeatherEdge rubberised extensions, and a durable cabinet construction provide protection against heat, rain, wind, or anything else the elements might throw at you in the coming years.

Also, while the Control 28-1 comes in a black finish, it doesn't have to stay that way: these speakers accept a variety of finishes and pigments to match any surrounding.

Features

  • 8"(20.3 cm) woofers with woven fibreglass cone
  • 1"(2.5 cm) PEI diaphragm tweeters with fluid cooling
  • Built-in InvisiBall mounting hardware
  • Weather-resistant enclosure and transducers
  • 100° x 100° coverage
  • 240 W power handling of programmatic material in direct 8 Ohms setting, plus built-in multi-tap transformers
  • Frequency response of 45 Hz to 20 kHz.

Specifications

Power Rating 240 W continuous programme (2 h)
120 W (480 W peak), continuous pink noise (2 h)
90 W (360 W peak) continuous pink noise (100 h)
Nominal Impedance 8 ohms (THROUGH setting)
Maximum Input Voltage 27.5 V RMS (2 h), 55.0 V peak
Frequency Response ± 3dB 62 Hz to 16 kHz
Frequency Response ±10 dB 45 Hz to 20 kHz
Sensitivity 91 dB, 1 W / 1 m (average 100 Hz to 10 k Hz)
Coverage Angle 100° x 100°
Directivity Factor 7.3 (averaged 1 kHz to 16 kHz)
Directivity Index 8.3 dB (averaged 1 kHz to 16 kHz)
Crossover Type 2nd order low-pass, 1st order high-pass, plus conjugate shaping
Transformer Taps 70 V: 60 W, 30 W, 15 W, 7.5 W
100 V: 60 W, 30 W, 15 W
Insertion loss: < 0.94 dB at any tap setting
Through setting: 8 Ohms nominal
Recommended Protective High-Pass 45 Hz high-pass (24 dB/oct) for 8 Ohms operation plus 15 W and 7.5 W taps; 55 Hz for 30 W tap; 65 Hz for 60 W tap
LF Driver Size 8" / 20.3 cm
HF Driver Size 1" / 2.5 cm
Driver Type LF Driver: Woven-fibreglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton voice coil former, high-temp voice coil wire, optimised cone geometry, linear suspension spider, and FEA optimised motor structure
HF Driver: PEI diaphragm, low-viscosity ferro-magnetic fluid, and Kapton voice coil former
Enclosure Material High-impact polystyrene (HIPS)
Grille Highly zinc-plated, finished in durable TGIC polyester powder-coating
Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2)
Environmental IP-44 per IEC529; exceeds MilSpec 810 for humidity, salt-spray, temperature & UV; passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray
Agency Rating ROHS-compliant; Transformer UL Recognised per UL1876
Dimensions (H x W x D) 386 x 282 x 219 mm
Weight 6.8 kg

In The Box

  • JBL Control 28-1 High Output Indoor/Outdoor Background/Foreground Speaker (Black)
  • InvisiBall Wall-Mounting System

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: JBL Control 28-1 High Output Indoor/Outdoor Background/Foreground Speaker (Black)
  • Manufacturer: JBL
  • Model: CONTROL 28-1
  • SKU: CONTROL 28-1
  • RM Product #: 34830

Recently Viewed

View All