Kessler
Kessler Crane Magnalink Motor Clamp
- For Use with Magnalink Mounting Plate
- Attaches Plate to CineDrive Slider Motor
- Screws and Hex Key Included
In stock
Ships Monday
You Pay:
$179.00
Kessler Crane Regulated D-Tap to Barrel Cable
- 12 VDC Nominal Output
- For CineShooter and Second Shooter
In stock
Ships Monday
You Pay:
$159.00
Kessler MG1021 Magnalink Rod Adapter
Mount CineDrive® Motor Control Boxes (MCBs) to rods
In stock
Ships Monday
You Pay:
$159.00
You Pay:
$62.95
You Pay:
$62.95
Kessler Second Shooter PRO - Standard 3 Axis Bundle - Slider Motor, Pan & Tilt Head and Controller
- Smoother bezier-based motion
- Significantly improved extended range WiFi (Over 200 ft.)
- Improved ergonomic design
- Lemo 2-pin Power Connector
In stock
Ships Monday
You Pay:
$3,999.00
You Pay:
$259.00
Kessler elektraDRIVE Motor Mount for CineSlider/Stealth
Mount the elektraDRIVE / CineDrive Motor Pods to CineSlider or Stealth
In stock
Ships Monday
You Pay:
$259.00
Kessler Crane Kwik Stand Camera Mounting Plate
Gear-saving plate compatible with the Kessler Crane Kwik Release system
Usually ships in 4 - 6 weeks
You Pay:
$189.00
You Pay:
$259.00
Kessler Kwik LONG Camera Plate (3/8"-16)
- For Kwik Release System
- Designed for Large Camera Systems
- Length: 6"(15.2 cm)
- Arca-Type Compatible
- Mounts Using One or Two 3/8"-16 Screws
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Kessler Crane Shuttle Dolly Base Kit
- Standard speed rail
- Operate manually
- Optional Keeper system
- Optional drag control
- Extendable foot system
Usually ships in 4 - 6 weeks
You Pay:
$3,199.00
Kessler Light Stand C-Stand Mounting Adapter
Converts the pin of the stand to a 1/4"-20 sized threaded stu
Usually ships in 4 - 6 weeks
You Pay:
$53.95
Kessler Crane Kwik Short Camera Plate (3/8"-16)
- For Kwik Release System
- Attaches to Cameras & Accessories
- Length: 8.9 cm/3.5"
- Arca-Type Compatible
- Mounts Using 1/4"-20 or 3/8"-16 Screws
Usually ships in 4 - 6 weeks
You Pay:
$82.95
Kessler MG1005 Kwik Utility Plate
Utility plate for Kessler Kwik mount system
Usually ships in 4 - 6 weeks
You Pay:
$149.00
Kessler Kwik Stand Mini
Ultimate gear-saving Kwik Release compatible plate
Usually ships in 4 - 6 weeks
You Pay:
$159.00
Kessler KillShock Mini Isolator System
- 20cm suction cup base with a hold rating of 79kg.
- 4x 2.5cm tether points on the bottom plate for ratchet strap tie downs.
- Holes for carabiner safety wire.
- 4x built-in handles.
Usually ships in 4 - 6 weeks
You Pay:
$1,699.00
Kessler CineSlider (3' Length) (NO crank handle)
Portable solution to get those quick, smooth short-run dolly movements
Usually ships in 4 - 6 weeks
You Pay:
$2,799.00
Kessler Crane CineSlider/Stealth Crank Handle
- For Use with CineSlider
- Snap-On Design
- Adjustable Arc Diameter
Usually ships in 4 - 6 weeks
You Pay:
$139.00
Kessler Crane Second Shooter Hard Case
- Compact Case for Second Shooter System
- Supports Complete 3-Axis Second Shooter
- Automatic Pressure Purge System
- Overlapping Interlocking Lid
- Supports Standard Size Master Locks
Usually ships in 4 - 6 weeks
You Pay:
$509.00
Kessler 100mm Ball Relocator
Used to attach your 100mm ball to the end of your rig
Usually ships in 4 - 6 weeks
You Pay:
$199.00
Kessler Crane Ground Center Rail Support for Shuttle Dolly
- Can be used with optional Adapter to mount stands
- Use every 1.52 m(5') to support Speed Rail
Usually ships in 4 - 6 weeks
You Pay:
$289.00
Kessler Crane CineSlider Soft Case (Traveler)
- Fits 28.5" CineSlider Traveller
- Cinch Straps
- Sewn-In Carrying Handle
- Shoulder Strap
- Small accessories pocket
Usually ships in 4 - 6 weeks
You Pay:
$279.00
Kessler Crane Rigid Slider Case- Standard Length (3')
Compatible with the 3' Pocket Dolly and Stealth Slider
Usually ships in 4 - 6 weeks
You Pay:
$439.00
You Pay:
$199.00
Kessler Crane K-Flex Case for Track System
- Holds 50' of K-Flex Track
- Cordura Exterior
- Side Grab Handles
Usually ships in 4 - 6 weeks
You Pay:
$759.00
Kessler Kwik Stand 15mm Rod Adapter w/Height Adjustment Bracket Kit
Compact and lightweight adapter
Usually ships in 4 - 6 weeks
You Pay:
$179.00
You Pay:
$109.00
Kessler Crane 15mm Motor Offset "Dogbone" Bracket
Available to Order From Rubber Monkey Today
Usually ships in 4 - 6 weeks
You Pay:
$159.00
Kessler Crane Battery Plate for CineShooter Pan & Tilt Head (V-Mount)
- Single V-Mount Battery Plate
- Designed to Power CineShooter
- Mounts with Magnet and 4 x Screws
- Connects to RC-Type Cable on Head
- Low-Profile Design
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Kessler Crane High Speed / Ultra Quiet Slide Motor
Available to Order from Rubber Monkey Today
Usually ships in 4 - 6 weeks
You Pay:
$1,029.00
Kessler Crane Mitchell Boss and Castle Nut
Available to Order From Rubber Monkey Today
Usually ships in 4 - 6 weeks
You Pay:
$489.00
Kessler Crane Motor Kit for Dana Dolly (Belt is required)
Available to Order From Rubber Monkey Today
Usually ships in 4 - 6 weeks
You Pay:
$1,579.00
Kessler Crane KillShock Mini Shock Module Fine-Tuning Kit
- 4 x Medium-Duty Cables
- 4 x Light-Duty Cables
- 16 x Set Screws
Usually ships in 4 - 6 weeks
You Pay:
$68.95
Kessler Crane MG1084 KillShock ATP (All-Terrain Plate)
- CNC-Machined Aluminium
- 120 x Mounting Holes
- For RadPower Bikes
- Mounting Hole Identification
Usually ships in 4 - 6 weeks
You Pay:
$669.00
Kessler Crane Spiked Feet for Kwik Rail Foot Adapters (Set of 4)
- Set of Four Spiked Feet
- Fits Kwik Rail Foot Adapters
- Threaded End Screws into Adapter
- Grips on Uneven Surfaces
Usually ships in 4 - 6 weeks
You Pay:
$83.95
Kessler Crane Regulated D-Tap to 2-Pin LEMO Cable
- 12 VDC Nominal Output
- For CineShooter and Second Shooter
Usually ships in 4 - 6 weeks
You Pay:
$189.00
Kessler Crane Traveler Length Stealth Slider with Rigid Case (72.4cm)
- 72.4cm Portable, Belt-Driven Slider
- 48.2cm of Camera Travel / 6.8kg Payload
- Adjustable Drag Control
- Rigid Case with Moulded Foam
- Compatible with Motion Control Systems
Usually ships in 4 - 6 weeks
You Pay:
$2,049.00
Kessler Crane Second Shooter PRO Slider Axis System
- Second Shooter PRO Controller
- Slider Motor for Select Kessler Sliders
- Repeatable Motion Control
- Up to 10 Keyframes
- iOS/Android App with 200' Wi-Fi Range
- Sony PS4 Controller Support
Usually ships in 4 - 6 weeks
You Pay:
$2,299.00
Kessler Second Shooter Pro Pan/Tilt System
- Second Shooter PRO Controller
- Pan & Tilt Head with Mounting Threads
- Repeatable Motion Control
- Up to 10 Keyframes on Each Axis
- iOS/Android App with 61m Wi-Fi Range
Usually ships in 4 - 6 weeks
You Pay:
$3,149.00
Kessler Crane CineShooter Pan & Tilt Head
- Motorised Pan & Tilt Head
- 6.8kg Load Capacity, Arca-Type Mount
- Onboard Controls, Joystick, Status LCD
- Wi-Fi & Bluetooth Control Options
- DMC & CineShooter App Control
Usually ships in 4 - 6 weeks
You Pay:
$6,099.00
Kessler Second Shooter PRO Controller
- Up to 10 keyframes per axis.
- Bluetooth device support with wireless PS4 controller operation.
- Automated, wireless firmware updates for your Second Shooter Pro hardware.
- Accelerometer-based mimic mode.
Usually ships in 4 - 6 weeks
You Pay:
$1,599.00
Kessler Crane CS1120 Kwik Rail Leg System
Available to order from Rubber Monkey Today.
Usually ships in 4 - 6 weeks
You Pay:
$2,699.00
Kessler KillShock Inversion Mounting Kit
- Use with KillShock Isolator System.
- Invert Your Gimbal or Camera.
- Various Mounting Adapter Options.
- Multiple 3/8"-16 and 1/4"-20 Threads.
Usually ships in 4 - 6 weeks
You Pay:
$1,729.00
Kessler KillShock Heavy Duty Shock Module (Black, set of 8)
- For KillShock Isolator System.
- Set of Eight Pre-Loaded Modules.
- Heavy-Duty Isolation Level.
- Use with Light- and Medium-Duty Modules.
Usually ships in 4 - 6 weeks
You Pay:
$889.00
Kessler KillShock Medium Duty Shock Module (Red, set of 8)
- For KillShock Isolator System.
- Set of Eight Pre-Loaded Modules.
- Medium-Duty Isolation Level.
- Use with Light- and Heavy-Duty Modules.
Usually ships in 4 - 6 weeks
You Pay:
$889.00
Kessler Kwik Rail - Precision Threaded Rail -42" (set of 2)
Machined threaded rail that can be configured into variable lengths
Usually ships in 4 - 6 weeks
You Pay:
$689.00
Kessler Crane 3/8"-16 to Female Baby Pin / Male Junior Pin Adapter
- Used to mount slider to stands
- Has a 3/8”-16 Stud
- Female receiver to mount to standard Baby Pin
- Can be used as male Junior Pin
Usually ships in 4 - 6 weeks
You Pay:
$73.95
You Pay:
$1,899.00
You Pay:
$339.00