- 7" 1280 x 800 IPS LCD Display
- 800:1 Contrast Ratio
- HDMI, Component, SDI, Composite Inputs
- HDMI Loop Output
- Peaking, False Colour, Histogram
Lilliput's 663/S2 7" LCD On-Camera 3G-SDI / HDMI Monitor is an on-camera monitor offering 1280 x 800 resolution with 400 nit brightness and an 800:1 contrast ratio. The monitor allows you to analyse focus, exposure, and other characteristics with False Colour, Pixel-to-Pixel, and Histogram. It supports both NTSC and PAL compatible signals with HDMI, 3G-SDI, Component, and Composite inputs. This monitor also features an HDMI output, allowing you to feed the monitor and send the video signal along an HDMI infrastructure. It also features both a built-in speaker and headphone jack.
The four front panel buttons and four rotating knobs can be assigned to specific functions that allow you to call up often-used menu functions. You can power the monitor by using the included battery plates or the 4-pin XLR connector. The included 4-pin XLR power cable features a barrel connector and three pigtail cables for connecting to a tally system. The monitor features a tally indicator on the front of the monitor. An assortment of supplied accessories includes a Sony L-type and Canon LP-E6-type battery plates. The monitor incorporates a 1/4"-20 threaded mounting hole on the bottom and on each side, and the included sun hood attaches via hook and loop fastener to a removable sun hood attachment frame. A V-mount and Gold mount plate adapter allows you to mount optional V-mount or Gold mount battery plates.
Assignable Function Buttons & Knobs
The front panel buttons and knobs can be customised to call up often-used menu functions.
F1 to F4 Buttons:
- Centre Marker
- Cheque Field
- Colour Bar
- Camera (format selection)
- H/V Delay
- False Colour
R1 to R4 Knobs
- Back Light
- 1:1 Pixel-to-Pixel
- Picture-in-Picture (for when the HDMI and Composite inputs are used simultaneously)
- H/V Delay
- Centre Marker
- Zoom (up to 8x)
- False Colour
- Colour Bar
- Image Flip
- Freeze Input
- Adjustable colour temperature
Peaking highlights the sharpest (most in focus) areas of the image with a colour outline. The monitor features two modes, monochrome, and colour. The monochrome mode shows the image in black and white with the red peaking outline, and the colour peaking mode shows the image in colour with a red peaking outline.
The False Colour feature provides under/over luminance warning by presenting the image as a series of colour values representing exposure.
The waveform provides an objective evaluation of your video signal. It displays the brightness of your image on an IRE scale, allowing you to see if your image will clip, and where your black levels are.
The Histogram provides a graphic depiction of how many pixels in your image are at each level between black and white. This provides you exposure information so you can objectively judge how much of your image is clipping, falling into the shadows, or being captured faithfully.
The vectorscope displays the signal on a graph so you can cheque the phase of your colours. The vectorscope function also verifies and cheques the overall tint and hue of an image.
1:1 Pixel Mode
1:1 pixel-to-pixel mapping allows you to look at parts of your image without any scaling, so you can see the actual detail and not be fooled by scaling artefacts.
This mode allows you to see the video signal outside the active picture area. Settings include Off, H/V Delay, H Delay, and V Delay.
Allows you to display an image with lower resolution than the screen with either a black border around the image or fill the screen entirely.
|LCD Size||7.0" (17.8 cm) (IPS)|
|Display Resolution||1280 x R.G.B. x 800 (Dot)|
|Active Area||149.76 (H) x 93.6 (V) mm|
|Dot Pitch||0.117 (H) x 0.117 (V) mm|
|Surface Treatment||Hard coating|
|Response Time||TR: 15 ms (typical), 20 ms (maximum)
TF: 20 ms (typical), 30 ms (maximum)
|Viewing Angle||Left/Right/Up/Down: 89°
178° wide viewing angle
|Input Signal||Analogue RGB|
|Interface||HDMI, YPbPr, Video, Audio, SDI, XLR, DC Power, Earphone|
|Input / Output Connectors||SDI, HDMI, YPbPr, Composite, Audio L&R, TALLY
Output: SDI, HDMI
SMPTE-425M-A: 1080p (60/59.95/50/30/29.97/25/24/23.976/24sf)
SMPTE-274M: 1080p (30/29.97/25/24/24Sf/23.976), 1080i (60/59.94/50)
SMPTE-296M: 720p (60/59.94/50/30/25)
SMPTE-125M: 480i (60/59.94)
ITU-R BT.656: 576i (50)
|Control||Basic: Video, YPbPr, HDMI & SDI bottoms. F1-F4 User-definable buttons, BRI/MENU knob, SAT knob, TINT knob, CONT knob
Advance: Brightness, Contrast, Saturation, Tint, Sharpness, Volume, Centre Marker, Aspect Marker, Screen Marker, Marker Colour, Marker Mat, Thickness, Cheque Field, Colour Bar, Camera, PIP, Image Flip, Zoom, Pixel-to-Pixel, Freeze Input, Underscan, H/V delay, Peaking, False Colour, Exposure, Histogram, Level Metre and Wave/Vector, Waveform Trans, Waveform Size, Language, SDI, Input Format OSD, LOGO, Manufacturer Default, Back Light, IPS
|Speaker||Built in, 1 W|
|Power Requirements||7 to 24 VDC (XLR Connector)|
|Power Consumption||≤11 W|
|Temperature||Operating: -20 to 60°C
Storage: -30 to 70°C
|Operating Humidity||80% RH maximum|
|Dimensions (WxHxD)||Monitor Without Sun Hood: 191.5 x 152 x 31.0 mm
Monitor With Sun Hood: 191.5 x 152 x 141.0 mm
Case: 309.0 x 247.0 x 97.5 mm
|Weight||Monitor Without Sun Hood:0.8 kg
Monitor With Sun Hood: 0.9 kg
Monitor with Suitcase: 2.2 kg
Australian Shipping Via DHL
DHL offers a great express shipping service to Australia from New Zealand. We are proud to be able to offer express shipping to main cities on the east coast of Australia, within the same timeframe ( If not quicker ) than local Australian courier companies. Prior to the Covid-19 outbreak, service standards for these main centers was overnight. However these services have been impacted greatly, and as such the overnight service has been suspended. Overnight shipping will likely resume once things have returned to normal.
Qualifying main centers include:
Whilst this service is extremely efficient and will likely be delivered within 1-2 days 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it doesn’t arrive within the specified time frame, in most cases it will be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcel boxes etc.
In The Box
- Lilliput 663/S2 7" Monitor with Peaking, False Color, Waveform, Vectorscope, Histogram
- Sun Shade
- LP-E6-Type Battery Plate
- F-970-Type Battery Plate
- HDMI A/C Cable
- Power & TALLY Cable
- Shoe Mount
- 12 VDC Adapter
- Adapter Panel
- Gimbal Bracket
Reviews(no ratings yet)
Give it a quick rating:
Thanks for your rating!
Write a review
- Product: Lilliput 663/S2 7" Monitor with Peaking, False Color, Waveform, Vectorscope, Histogram
- Manufacturer: Lilliput
- Model: 663/S2
- SKU: 663/S2
- RM Product #: 23638
- Display Size: 7.0 inches
- Screen Resolution: 1280x800
- Monitor Inputs: 3G-SDI, HDMI, Component, Composite
- Warranty: All LILLIPUT brand products come with a one year manufacturer warranty.