Magewell USB Capture HDMI 4K Plus
Features
- Capture up to DCI 4K to Your Computer
- Capture from Cameras/Game Consoles/Etc.
- Supports RGB 4:4:4, YCbCr 4:4:4 & 4:2:2
- HDMI Input & Loop-Through
- 3.5mm Audio I/O (Capture/Extract)
Description
The Magewell USB Capture HDMI 4K Plus connects to your computer over a USB interface and lets you capture up to a 4K DCI resolution signal (4096 x 2160) with embedded audio via an HDMI 2.0 input. It allows you to capture from cameras, game consoles, and various other devices directly to your Windows, Mac, Linux, or Chrome computer. It also features an HDMI loop-through for local monitoring, and 3.5mm audio input and output for capturing external audio and extracting embedded audio.
The device also offers a variety of processing and other features, including resolution scaling and deinterlacing. It also has a status LED for displaying the status of the input, including idle, input signal locked, memory failed, or FPGA configuration.
Features
- HDMI 2.0/1.4 input and loop-through, audio in/out, USB 3.0 computer interface
- Capture up to 4096 x 2160, 4:4:4, 60 fps
- Compatible with Windows, Mac, Linux, and Chrome OS
- Plug-and-play operation
- UVC protocol support
- Up/down scaling
- Deinterlacing
- Image control
- Various output colour spaces
- Firmware upgradeable
- Multiple devices on one host
Included USB Capture Utility V3
- Capture format setting
- Audio volume control
- Mirror and flip
- EDID editing and importing
- Firmware update
- Export diagnose report
- Other functions, such as cropping, deinterlacing, and device name setting
HDMI Specific Features
- 600 MHz HDMI receiver
- Adaptive HDMI equaliser
- Customised EDID
- Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
- Full colourimetry support
- Up to 4096 x 2160 4:4:4 60 fps input signals
- 2 channel ISC60958 audio streams
- Extraction of audio formation information and channel status data
- Extraction of video timing information
- Extraction of 3D format information
- Side-by-side half, top-and-bottom, and frame packing 3D mode
Analogue Audio Features
- Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack
- Capture of analogue audio via 3.5mm input jack (mic level)
- Playback audio via 3.5mm headphone jack
Video Capture Formats
- Capture resolutions up to 4096 x 2160
- Capture frame rates up to 120 fps (actual capture frame rate can be limited by USB bandwidth and internal working frequency; typical capture frame rates on the Intel USB 3.0 controller are as follows: 1920 x 1080 YUY2 at up to 90 fps, and 3840 x 2160 NV12 at up to 30 fps)
- NV12 and I420 4:2:0 8-bit (up to 4096 x 2160)
- YUY2 and UYVY 4:2:2 8-bit (up to 4096 x 2160)
- RGB24 and RGB32 4:4:4 8-bit (up to 2048 x 2160)
- Default capture formats are YUY2 and NV12; more capture formats can be set using the included USB Capture Utility software
Video Processing Features
- Video processing pipelines with 640 megapixels processing bandwidth
- Cropping
- Scaling
- Frame rate conversion
- Vertical flip and mirror
Video Deinterlacing
- Weave
- Blend top and bottom field
- Top field only
- Bottom field only
Aspect Ratio Conversion
- Auto or manual selection of input aspect ratio
- Auto or manual selection of capture aspect ratio
- Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)
Colour Format Conversion
- Auto or manual selection of input colour format and quantisation range
- Auto or manual selection of capture colour format, quantisation range, and saturation range
- Support for RGB, YCbCr 601, and YCbCr 709 colour formats
- Support for limited or full quantisation range
- Support for limited, full, and extended gamut saturation range
Multiple Devices On One Computer
- Connect multiple units to one system
- Set the device serial number as the device name shown in the system using the USB Capture Utility
Specifications
Supported Operating Systems | Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 and x64) OS X 10.9 - 10.11 macOS 10.12 Linux x (Ubuntu 12.04 - 16.10, CentOS 7) Chrome OS |
Input Resolution | Up to 4096 x 2160, 4:4:4, 60 fps input signals |
Supported Sampling Rate | RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 |
Input | 1 x HDMI 2.0 1 x 3.5 mm audio jack |
Output | 1 x HDMI loop-output 1 x 3.5 mm audio jack |
Host Interface | 1 x USB 3.0 (compatible with USB 3.1 Gen 1, USB 2.0) |
Video Capture Formats | Up to 4096 x 2160 Frame rates up to 120 fps (actual capture frame rate can be limited by USB bandwidth and internal working frequency; typical capture frame rates on the Intel USB 3.0 controller are: 1920 x 1080 YUY2 at up to 90 fps, and 3840 x 2160 NV12 at up to 30 fps) NV12 and I420 4:2:0 8-bit (up to 4096 x 2160) YUY2 and UYVY 4:2:2 8-bit (up to 4096 x 2160) RGB24 and RGB32 4:4:4 8-bit (up to 2048 x 2160) Default capture formats are YUY2 and NV12 |
Supported APIs | Windows: DirectShow Wave API/DirectSound/WASAPI Linux: V4L2 ALSA OS X/macOS QuickTime AV Foundation |
Supported Software | VLC VirtualDub OBS XSplit vMix VidBlaster Wirecast Microsoft Media Encoder Adobe Flash Media Encoder Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software |
Power Consumption | 5 V Max Current: 1.4 A Max Power Consumption: 7 W |
Operating Temperature | 0 to 40°C |
Storage Temperature | -20 to 70°C |
Relative Humidity | 5 to 90% non-condensing |
Dimensions | 9.8 x 5.7 x 1.7 cm |
In The Box
- Magewell USB Capture HDMI 4K Plus
- USB 3.0 Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Magewell USB Capture HDMI 4K Plus
- Manufacturer: Magewell
- Model: 32090
- SKU: 32090
- RM Product #: 60213