Marshall Electronics VS-102-HDI 2.0 MP High Resolution Encoder/Decoder with HDMI

Product #57527 | SKU VS-102-HDI | Marshall
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Overview

For Surveillance & IP Video Applications, Up to 30 fps at 1920 x 1080 Streaming, H.264 and H.264/MJPEG Dual Streaming, HDMI and Composite Video I/O

Description

The Marshall Electronics VS-102-HDI 2.0 MP High Resolution Encoder/Decoder with HDMI is a High Definition Video Server that allows real-time transmission of HDMI or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth.

The VS-102-HDI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its' original high definition state. Additionally, other computers or VS-102-HDI decoders connected to the same network can monitor both the audio and video in multiple locations throughout a venue such as dressing rooms, stage manager, or box office at the same time. When properly configured, the VS-102-HDI may be simultaneously monitored through the internet.

Features

  • High Quality AV Encoder / Decoder (Selectable)
  • Full HD Resolution: See specifications tab for resolutions
  • Up to 30fps at 1920 x 1080 streaming
  • H.264/H.264 & H.264/MJPEG Dual Streaming
  • Two-Way Audio Communication
  • Mono Codec G.711 for Security applications
  • Stereo Codec AAC for Broadcast applications
  • HDMI Video Input / Output
  • Composite Video Input / Output
  • Audio Input / Output
  • Instant Recording to an optional USB drive (USB 2.0)
  • Supports DDNS (Dynamic Domain Name Server)
  • Built-in PoE (Power Over Ethernet: 802af)
  • RS-232 control built-in
  • RS-422/485 control built-in
  • 2 Sensor inputs
  • 2 Alarm outputs
  • Watchdog for system recovery
  • Integrated Video Motion Detection
  • Transmission of Video Data through FTP server
  • Wide Range of Video Bit Rate Control (32kbps ~ 10Mbps)
  • PSIA and ONVIF compliant

Specifications

System
System Mode Encoder, decoder
Network
Network Interface Ethernet 10/100Base-T on RJ-45 connector
Network Protocol TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP
Video
Standards Main Stream: H.264
Secondary Stream: H.264/MJPEG
Bitrate 32 to 10,240 Kbps
Resolution 1920 x 1080/60i to 352 x 240/30fps, 18 resolution steps
Frame Rates 1 to 30 fps
Inputs 1 x HDMI type-A, HDMI RX
1 x Composite on BNC connector
Outputs 1 x HDMI type-A, HDMI TX
1 x Composite on BNC connector (Default)
Motion Detection Sensitivity adjustment
Audio
Standards G.711, AAC
Sample Rate G.711: 8 kHz
AAC: 32 kHz
Bitrate G.711: 64 Kbps
AAC: 64 Kbps, 128 Kbps
Input 1 x Line-in on 3.5 mm stereo mini
Output 1 x Line-out on 3.5 mm stereo mini
Serial Interface
Connectors 1 x RS-232 on terminal block
1 x RS-422/485 on terminal block
Bitrate 2,400 bps to 115,200 bps
Sensor and Alarm
Sensor Input 2 x NO contact on terminal block
Alarm Output 2 x NO contact on terminal block
Beep 1 x Buzzer (88 dB minimum)
Reset Button 1 x Factor reset button
User Interface
System Status 4 x LED
Storage
Recording and Backup 1 x USB 2.0 port
Software
Software VS Manager/VMS-16: Live Monitoring, recording, search and playback, backup
General
Power Requirements 12 VDC at 0.8 A, PoE (Power over Ethernet): 802.3af
Power Consumption 9.6 W maximum
Operating Temperature -10 to 50°C
Dimensions (W x D x H) 134 x 125 x 35 mm
Weight 504 g

In The Box

  • Marshall Electronics VS-102-HDI 2.0 MP High Resolution Encoder/Decoder with HDMI
  • Power Supply (For Non-PoE Use)

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Marshall Electronics VS-102-HDI 2.0 MP High Resolution Encoder/Decoder with HDMI
  • Manufacturer: Marshall
  • Model: VS-102-HDI
  • SKU: VS-102-HDI
  • RM Product #: 57527

Recently Viewed

View All