Azden PRO-XD 2.4 GHz Digital Wireless Lavalier System
Overview
Description
The PRO-XD from Azden is a 2.4 GHz digital wireless lavalier system that has over a 100' range with automatic frequency scan and sync capabilities. It can be used to capture audio in several environments for applications such as camcorders, DSLR, mobile devices, recorders, and more.
The PRO-XD system features a PRO-XDT bodypack transmitter, a PRO-XDR camera-mount receiver, and an EX-503XD lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a line level jack and a mixed input jack to allow for several source options.
The PRO-XD's transmitter and receiver are powered by internal lithium-ion batteries, and each can operate for over 10 hours when fully charged. In addition, up to four systems can be used simultaneously with no interference.
Finally, set up is a breeze with automatic syncing between receiver and transmitter. The EX-503XD lavalier microphone features an omnidirectional polar pattern with a frequency response of 30 Hz to 20 kHz. The PRO-XD system also includes an 1/8" mini-output cable, a USB cable, a lapel clip, a shoe mount, and a battery charger.
Key Features
- Operates in 2.4 GHz wireless range, which is completely free of TV and radio interference
- 48 kHz/16-bit digital audio quality
- Mobile device compatible
- Rechargeable internal batteries will run for approximately 10 hours
- Wide frequency response and low internal noise
- Headphone monitor output
- Line in aux input
Specifications
| Operating Frequency |
2.4 GHz ISM band |
| Dynamic Range |
90 dB |
| Signal to Noise |
80 dB |
| Operating Range |
115' (35 m) typical; up to 394' (120 m) in ideal conditions |
| Frequency Response |
20 Hz - 20 kHz, ± 1 dB |
| Digital Sampling |
16-bit/48 kHz |
| System Latency |
14 ms |
| Battery Life |
300 cycles |
| Battery Type |
Lithium-ion |
| Power Supply |
USB 5 V |
| RF Output Power |
10 mW |
| Maximum Output Level |
-14 dBV |
| Mic Output |
1/8" (3.5 mm) dual-mono/stereo |
| Headphone Output |
1/8" (3.5 mm) stereo |
| Output Impedance |
Mic: 600 ohms Headphone: 16 ohms |
| Battery Life |
16 hours |
| Battery Charge Time |
3 hours |
| Dimensions (W x H x D) |
1.9 x 3.1 x 0.6" (48 x 79 x 14 mm) |
| Weight |
2.4 oz (68 g) |
| RF Output Power |
10 mW |
| Mic Input |
3.5 mm mono TRRS |
| Aux Input |
1/8" (3.5 mm) stereo, line level |
| Input Impedance |
Mic: 2.2 kOhms Aux: 10 kOhms |
| Maximum Input |
300 mV RMS |
| Battery Life |
11 hours |
| Dimensions (W x H x D) |
1.9 x 3.1 x 0.6" (48 x 79 x 14 mm) |
| Weight |
2.2 oz (62 g) |
| Microphone Element |
Electret condenser |
| Polar Pattern |
Omnidirectional |
| Frequency Response |
30 Hz to 20 kHz |
| Sensitivity |
-46 dB at 1 kHz (0 dB=1 V/Pa) |
| Impedance |
2.2 kOhms (at 1 kHz) |
| Power Requirement |
Plug-in power DC 1-10 V |
| Connector Type |
1/8: (3.5 mm) TRRS |
| Cord Length |
41" (105 cm) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Azden PRO-XD 2.4 GHz Digital Wireless Lavalier System
- Manufacturer: Azden
- Model: PRO-XD
- SKU: PRO-XD
- RM Product #: 28221
Recently Viewed
View AllAzden PRO-XD 2.4 GHz Digital Wireless Lavalier System
