NITECORE MT1C Multi-Task LED Flashlight has been discontinued, here are some related products you might like:
NITECORE MT1C Multi-Task LED Flashlight
Overview
Description
Note: Product does not include batteries
The MT1C Multi-Task LED Flashlight from Nitecore is a powerful and durable illumination tool that easily fits in the palm of your hand or your pocket. It features three normal outputs from 20 to 125 lumens, with a 280-lumen turbo mode. An intelligent two-stage pushbutton switch allows you to programme your desired output, including a disorientating strobe or SOS emergency signal. To activate the turbo mode, just tighten the head. This gives you access to your preferred operating output, while allowing you to quickly change to turbo mode.
Built to withstand daily use, the aluminium housing has a scratch and corrosion-resistant hard-anodised finish, is submersible to 6.6', and impact-resistant to 5'. A diamond-textured handle provides a sure-grip in cold or wet conditions, while the faceted anti-roll collar offers an easy hand-hold for activating the turbo mode.
Key Features:
Light Performance
- 280-lumen Turbo mode
- Three normal outputs from 20 to 125 lumens
- White Cree XP-G R5 LED emitter
- Tight centre cone of light with large dimmer peripheral ring
- Digitally regulated output ensures constant beam intensity throughout battery life
- Deep, smooth aluminium reflector produces smooth beam without holes or hotspots
- SOS signal automatically cycles through Morse-code sequence
- Strobe-mode causes temporary blindness and disorientation
Switching
- Two-stage tailcap switch
- Partially press to cycle through the outputs, release to set desired output
- Intelligent switch stores preferred brightness setting
- Click to turn on programmed output
- Tighten head to choose Turbo, then click to activate
Construction Details
- Aluminium alloy housing
- Type III hard-anodised finish
- Corrosion and scratch resistant
- Anti-reflective coated, tempered lens
- Textured diamond grip for sure handling
- Submersible to 6.6', impact-resistant to 5'
- Removable titanium-plated stainless steel clip
- U-shaped tailcap shroud helps prevent accidental activation
- Reverse polarity protection protects light if batteries are installed incorrectly
Specifications
Illumination Source |
White Cree XP-G R5 LED |
Output Range |
* Low: 20 lumen * Moed: 60 lumen * High: 125 lumen * Turbo: 280 lumen |
Battery / Runtime |
1 x CR123A lithium battery : * Low: 23.0 hr * Moed: 8.0 hr * High: 3.25 hr * Turbo: 1.25 hr |
Construction |
Aluminium |
Waterproofing |
IPX8 rated, submersible to 6.6' (2 m) |
Dimensions |
* Head: 0.9" (2.3 cm) * Body: 3.5 x 0.8 (8.8 x 2.2 cm) |
Weight |
1.5 oz (42 g), without battery |
In The Box
- NITECORE MT1C Multi-Task LED Flashlight
- Clip
- Lanyard
- Spare plastic cap
- Spare O-ring
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: NITECORE MT1C Multi-Task LED Flashlight
- Manufacturer: Nitecore
- Model: MT1C
- SKU: MT1C
- RM Product #: 24270