Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver
- Up to 140W per Channel at 8 Ohms
- AccuEQ Sound Optimization
- 4K Ultra HD Upscaling and Pass-Through
- HDMI with 3D and Audio Return Channel
- 8x HDMI-In / 2x HDMI-Out
- Product: #47361
- SKU: TX-RZ1100
Enjoy immersive multi-channel sound with the Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver. It delivers up to 140W of power per channel at 8 Ohms, and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay support allow the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets.
Onboard Wi-Fi and Ethernet connectivity allow the TX-RZ1100 to access a variety of Internet-based music sources, like Spotify Connect, Tidal, Internet radio, and more. With eight HDMI inputs and two HDMI outputs, this receiver can act as a video switcher for your HD source components. It will pass through 3D and 4K signals and upscale 1080p signals via HDMI to near-4K quality for enhanced viewing when paired with a 4K display. The receiver also has a USB port for accessing media stored on USB flash drives. AccuEQ sound optimisation will calibrate the receiver to your speakers and room setup for a tailored listening experience.
Multi-Zone Audio and Video
Pre-outs for Zones 2 and 3 as well as Powered Zone 2 and 3 capability open up distributed audio options throughout the home backed by dedicated Zone 2 and Zone 3 DACs. Select HDMI terminals support 4K/60 Hz video, 4:4:4 Colour Space, HDCP 2.2 copy protection, and High Dynamic Range (HDR) with BT.2020 support for UHD streaming and broadcasting. A 4K and HDCP 2.2/HDR-compatible Zone 2 HDMI output allows you to enjoy A/V sources connected to the receiver in another room.
THX-Certified for Theatre-Like Sound
THX certification is designed to guarantee the same high volume and low distortion levels you experience in a commercial theatre in your listening room. THX Select2 Plus is typically recommended for screen-to-seat viewing distances of 10 to 12 feet. To achieve THX certification, amplifiers must undergo independent bench testing to satisfy THX requirements.
High Instantaneous Current
The TX-RZ1100's amps deliver high instantaneous current to grip and control speakers, moving them through their entire range. It's designed to provide a significant boost to the dynamism, detail, and accuracy of music and movie soundtracks for an enhanced listening experience.
With High-Current Digital Amplification, Power Meets Control
The TX-RZ1100 combines high-current architecture with digital amplification and filtering technology. Noise-reduction hardware, including a high-output transformer, is designed to deliver fast dynamics, thrilling power, and precise detail resolution.
Vector Linear Shaping Circuitry
The TX-RZ1100 features Vector Linear Shaping Circuitry, or VLSC, across all channels. VLSC is designed to virtually remove digital pulse noise for a smooth analogue signal. Data is converted between sampling points, and these points are joined with analogue vectors in real-time to produce a smooth output wave form. The result is a virtually noiseless, smooth analogue signal based on the digital source. It can bring out even the subtlest nuances in audio sources.
Sound from Above
Packing 9.2 channels, the TX-RZ1100 unlocks a full 5.2.4-channel Dolby Atmos and DTS:X experience via four in-ceiling or up-firing speakers. Included 11.2 multi-channel pre-outs enable 7.2.4-channel layouts when used with an additional stereo amplifier.
FireConnect Multi-Room Audio Upgradable
A firmware update enables almost any audio source connected to the receiver – from vinyl to streaming audio – to be sent wirelessly via FireConnect, powered by Blackfire, to an optional compatible speaker placed anywhere in your home. It's designed to be stable, fast, and easy to control with a mobile device.
AccuEQ Calibration and Optimisation
AccuReflex, part of the AccuEQ room calibration suite, is designed to phase-match height and floor-standing speakers for a seamless reproduction of object-based sound. AccuEQ optimises the entire system to suit your space without affecting front-speaker characteristics for pure stereo listening.
Enhanced Performance and Ease of Installation
The Onkyo TX-RZ1100 is designed to deliver enhanced audio performance in the configurations you want.
|Output Power||140 W per channel @ 8 Ohms, 1 kHz, 0.08% THD, 2-channel driven, FTC
200 W per channel @ 6 Ohms, 1 kHz, 0.9% THD, 1-channel driven, FTC
|Dynamic Power||320 W @ 3 Ohms, front
270 W @ 4 Ohms, front
160 W @ 8 Ohms, front
|Output Impedance||4 to 16 Ohms|
|Tuner||AM / FM|
|Frequency Response||5 Hz to 100 kHz (+1, -3 dB) (direct/pure audio)|
|Signal to Noise Ratio||108 dB (line, IHF-A)
90 dB (phono, IHF-A)
|Surround Modes||DTS: DTS HD Master Audio
Dolby: Dolby TrueHD, Dolby Digital Plus
|Object-Based Audio Support||Dolby Atmos, DTS:X|
|Upscaling||Yes, from 1080p to near-4K|
|Deep Colour / x.v. Colour Support||Yes/Yes|
|FM Frequency Range||87.5 to 107.9 MHz|
|AM Frequency Range||530 to 1710 kHz|
|Wi-Fi||Yes, IEEE 802.11 a/b/g/n 5 GHz / 2.4 GHz|
|Inputs||8 x HDMI (1 front)
3 x Optical TOSLINK
2 x Digital coaxial
2 x Component video
2 x Composite video
7 x Stereo RCA audio (1 phono)
1 x USB (rear)
|Outputs||2 x HDMI (1 ARC-compatible, 1 Zone 2)
1 x Component video
1 x Zone 2 stereo pre-out
1 x Zone 3 stereo pre-out
1 x 11.2-channel pre-out
1 x 1/4" (6.35 mm) headphone (front)
|Other Ports||1 x Setup microphone input (front)
1 x FM tuner antenna
1 x AM tuner antenna
1 x Ethernet
1 x AC power cord
1 x IR remote in
1 x RS-232C
1 x Trigger out (12 VDC, 150 mA max)
|Speaker Connectors||11 x Binding post pairs|
|Audio Return Channel (ARC)||Yes, on main HDMI output|
|HDCP Compliance||HDCP 2.2 on inputs 1 to 5|
|Input Sensitivity and Impedance||200 mV / 82 kOhms (line)
3.5 mV / 47 kOhms (phono MM)
|Output Level and Impedance||Component Y, Composite Video: 1.0 V p-p/75 Ohms
Component PB/CB, PR/CR: 0.7 V p-p/75 Ohms
|Component Video Frequency Response||5 Hz to 100 MHz, +0 dB, -3 dB|
|RCA Output Level and Impedance||Pre-Out: 1.0 V/330 Ohms
Subwoofer Pre-Out: 1.0 V/330 Ohms
Zone Out: 200 mV/1.2 kOhms
Zone Pre-Out: 2.0 V/1.2 kOhms
|Phono Overload||70 mV (MM, 1 kHz, 0.5%)|
|Tone Control||Bass: ±10 dB, 100 Hz
Treble: ±10 dB, 10 kHz
|Power Requirements||230 VAC, 50 Hz|
|Power Consumption||Operational: 320 W
Standby: 0.15 W
|Dimensions (W x H x D)||435 x 201 x 453 mm|