Paralinx Tomahawk SDI 1:2 DELUXE Package (V-Mount)
Overview
Description
The Paralinx Tomahawk SDI 1:2 DELUXE Package includes one Arrow-X HDMI transmitter and two Arrow-X receivers and a comprehensive variety of accessories all packaged in a custom Pelican 1550 case. The case fits a total of two transmitters, three receivers, and two Array antennas in addition to the accessories, so there's room for further growth.
The Paralinx Tomahawk System provides real-time wireless 1080p/60 4:2:2 HD video transmission over a range of up to 2000 feet with a sub 1ms latency glass-to-glass, and longer distances can be achieved with optional antennas. The included transmitter features an SDI input, and the receivers each feature dual 3G-SDI outputs. The transmitter supports up to four receivers simultaneously.
1:2 DELUXE Package
- 1 Tomahawk HDMI transmitter
- 2 Tomahawk receivers
- 1 Array panel antenna
- 1 Sidearm mounting bracket for the transmitter
- 2 Perch mounting brackets for the receivers
- 2 V-Mount male battery plates for powering receivers
- 2 V-Mount female battery plates for mounting Tomahawk to receivers
- 3 P-Tap to LEMO power cables
- 1 LEMO to LEMO power cable
- 2 Right-angle to right-angle BNC cables
- 2 AC adapters for the receivers
- 2 Standard 5 dBi antennas for transmitter
- 10 Standard 2 dBi antennas for receivers
- IR cable and remote for menu access for receivers
- Mini-USB to USB cable for firmware updates for receivers
- 5 Type-N to RP-SMA cables for Tomahawk
- 18 dBi Attenuator for Talkback Channel on the Tomahawk
- Limited 1-Year Warranty on Paralinx Items
- Limited Lifetime Warranty on Pelican Case
Tomahawk System
- Lightweight design for handheld, Steadicam, Gimbal, and UAV applications
- Machined-aluminium transmitter enclosure
- Moulded PCB receiver enclosure
- 128 bit AES encryption
- Operates on 5GHz frequency band
- Conforms to major standards including FCC, COE, MIC (TELEC), and RoHS
Array Antenna
- Connects to the five antenna receptacles on the Tomahawk receiver using included N to RP-SMA cables and boosts reception range to up to 19 dBi. It also increases overall signal strength.
Sidearm
- The Sidearm mounting bracket attaches to the transmitter and functions similar to how a cage does for a camera. Featuring 1/4"-20 and 3/8"-16 threads all around, it allows you to mount various accessories, such as the Paralinx NP-F Battery Plate.
Perch Mounting Bracket
- The Paralinx Perch allows you to attach the Tomahawk receiver along with a battery plate, battery, and Array antenna on an elevated pole for better line-of-sight transmission. It's threaded on both sides so you can attach the receiver on one side and battery plate on the other. Using a bale-block with an approximately 1" diameter opening (2.5 cm), it can be mounted on most poles and stands. Two shim plates are included (1/8" and 1/4") to support different sized batteries by providing necessary clearance/extra spacing.
Custom Pelican 1550 Case
This is a black Pelican 1550 case, featuring a custom foam insert that holds up to two Tomahawk transmitters, three receivers, two Array panel antennas, and accessories.
Watertight, crushproof, and dustproof
Easy-open double throw latches
Open cell core with solid wall design
O-ring seal
Automatic pressure equalisation valve
Rubber over-moulded handle
Stainless steel hardware and padlock protectors
2-level Pick N Pluck with convoluted lid foam
Specifications
Supported Video |
Up to 1080p60 4:2:2 uncompressed |
Transmission Range |
2000 ft (610 m) line-of-sight |
Delay |
Less than 1 ms |
Input / Output |
Transmitter: 3G-SDI input with 3G-SDI loop output Each Receiver: 2x 3G-SDI outputs |
Frequency Band |
5 GHz |
Encryption |
128-bit AES |
Power Connector |
2-pin LEMO Input Voltage: 7 to 17 V unregulated |
Material |
Transmitter: Machined aluminium Receiver: Moulded PCB |
Mount Type |
Transmitter: 2x 1/4"-20 threads |
Compliance |
FCC, COE, MIC (TELEC), and RoHS |
Dimensions |
Transmitter: 4 x 2.5 x 0.8" (10 x 6.4 x 2 cm) (without antennas) Each Receiver: 5 x 5.6 x 1.3" (12.7 x 14.2 x 3.3 cm) (without antennas) |
Weight |
Transmitter: 0.4 lb (179 g) (without antennas) Each Receiver: 0.75 lb (340 g) (without antennas) |
Connector Types of Included Cables |
5x 10" long (25 cm) right-angle N to RP-SMA cables |
Frequency Range |
5.1 - 5.8 GHz |
Dimensions |
13.8 x 13.8 x 1.25" (35 x 35 x 3.2 cm) |
Material |
Body: Polypropylene Latch: ABS Purge Body: ABS Lid O-Ring: Polymer Purge Vent: 3 Micron Hydrophobic Non-Woven PET Pins: Stainless Steel Purge O-Ring: 70 Shore Nitrile |
Dimensions |
Interior: 18.4 x 14 x 7.6" (47 x 35.6 x 19.3 cm) Exterior: 20.6 x 16.9 x 8.1" (52.3 x 43 x 20.6 cm) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Paralinx Tomahawk SDI 1:2 DELUXE Package (V-Mount)
- Manufacturer: Paralinx
- Model: 10-1256
- SKU: 10-1256
- RM Product #: 29938