Phottix Mitros+ TTL Transceiver Flash for Sony Multi-Interface Shoe Cameras

Description

The Phottix Mitros+ TTL Transceiver Flash features a built-in Odin transmitter and receiver as well as full ADI / P-TTL functionality for use with Sony Multi-Interface Shoe cameras. The Mitros+ has a guide number of 190' at ISO 100 in the 105mm position, useful for illuminating subjects within a zoom range of 24 to 105mm. Additionally, the flash features wireless transmission via an optical pulse or IR triggering and can access 4 channels and 3 groups.

This radio transmission and reception is compatible with Strato II transmitters in addition to full compatibility with the Odin-series wireless devices. Also, this Mitros+ has memory functions for saving up to three sets of flash and function information for quickly changing when needed.

The flash head has the ability to rotate 180° in each direction and tilt from -7° to +90°. This allows for excellent control over bounce angles during a shoot. Also, the Mitros+ features a recycle time from 0.1 to 5 seconds that can be improved to 2.5 seconds with a quick flash mode.

Additionally, this flash unit features full manual controls and customizable shooting options that include high-speed sync and stroboscopic shooting modes. The flash runs on 4 AA batteries and comes with an attachable diffuser for softening light when needed. Other accessories include a soft case, 3.5mm sync cable, USB cable, USB drive with manual, and a flash stand. This model comes equipped with the Sony Multi-Interfrace Shoe and is not compatible with the older Sony/Minolta shoe.

Video: Hands-On Review Of The Phottix Odin Wireless TTL Trigger Set

Features

• Radio transmission is compatible with Odin and Strato II wireless triggering systems up to 328' away
• Wireless functionality via optical pulses in 4 channels and 3 groups with a range of up to 52.5' indoors
• Ratio modes from 1:8 to 1:1 and 8:1 are available for firing multiple flash units
• A modelling flash setting is available for previewing how your shot will turn out
• High-speed synchronisation allows you to fire using the fastest shutter speed available on your camera
• A bounce card and wide-angle diffuser are built into the flash head for convenience
• Stroboscopic mode fires a series of flashes at a frequency of 1-199 Hz for up to 100 flashes
• Status LED lights will notify you when the flash is ready to fire
• Overheating protection will slow the firing time to avoid damage from heat
• AF-assist light for focusing in poor lighting conditions
• Memory system for retaining your settings when the flash is powered off
• 3.5mm sync port for connecting this flash to a larger system
• USB port for installing firmware updates

Specifications