Lighting

• Stainless Steel Tools
• Strong ABS Plastic Housing
• Carabiner
• 4mm Hex Key
• Coin Key

• Made from high-quality muslin material
• Completely seamless ( ONE piece )
• Stitched edge for durability
• Pre Stitched Loop
• Lightweight

• Braided Stainless Steel

• 0.6 Solid Neutral Density Filter
• Requires +2 Stop Exposure Increase
• Darkens Entire Image
• Allows Reduced Shutter Speed
• Allows Wider Aperture

• 29.3 x 28 x 0.95 cm , Velveteen Exterior
• Included Eggcrate Narrows Beam
• Clear Rear Panel, Less Diffusion
• Improved, Easy Inflation
• Wide Compatibility with Multiple Brands

Connect multiple pieces of 9.Solutions 5/8" Rod

• 1-Set of 5.9" Long Rods
• 3/8"-16 Threads on Both Ends of the Rod
• Includes One Rod Connector
• Used for Rigging Lights and Cameras
• Used with a Variety of Other Accessories

• 1-Set of 9.8" Long Rods
• 3/8"-16 Threads on Both Ends of the Rod
• Includes One Rod Connector
• Used for Rigging Lights and Cameras
• Used with a Variety of Other Accessories

• 1-Set of 39" Long Rods
• 3/8"-16 Threads on Both Ends of the Rod
• Includes One Rod Connector
• Used for Rigging Lights and Cameras
• Used with a Variety of Other Accessories
• Manufactured from Aluminium

• 2x Long Nuts
• 6x Finger Nuts
• 3/8" Thread

• Load Capacity: 5 kg
• Jaws Open from 8 - 35 mm
• Position anywhere

• Load Capacity: 10 kg
• Weighs 320 g
• Wide jaws
• Strong torsion spring
• Support irregularly shaped objects

• Load Capacity: 30 kg
• Weighs 0.44 kg
• 60 mm Jaw Opening
• Accommodate odd shapes

• Load Capacity: 30 kg
• Weighs 135 g
• 30 mm Jaw Opening

• Load Capacity: 20 kg
• Weighs 0.55 kg
• 60 mm Jaw Opening
• 5/8" Receiver
• Fits all Super Clamp Accessories

• Aluminium Construction
• 3/8" Rods and Thread

• 2x 5/8" Pins with 3/8"-16 Female Thread
• Load Capacity: 5kg

• Load Capacity: 6.0 kg
• 5/8" Pin with 3/8" Female Thread
• 3/8"-16 Male Thread

• Revolving 3/8" and 5/8" Receptacle
• Accepts Optional Pass-Through Rods

• Mounts to any 3/8"-16 male thread
• 3/8" Female Thread, 5/8" Receiver
• Enables 1-hand operation

• Aluminium Construction
• 3/8" Rods and Thread

• Load Capacity: 20 kg
• Clamping Range: 0 to 50 mm
• Tightening Knob
• 5/8" Pin
• 3/8"-16 (M10) Connection

• Revolving 3/8" and 5/8" Receptacle
• Accepts Optional Pass-Through Rods

• Load Capacity: 20 kg
• Clamping Range: 0 to 50 mm
• Tightening Knob
• Grip Joint with 3/8" & 5/8" Receptacles
• 3/8"-16 (M10) Connection

• Load Capacity: 20 kg
• Clamping Range: 0 to 50 mm
• Tightening Knob
• 5/8" Receiver
• 3/8"-16 (M10) Connection

• Load Capacity: 20 kg
• Jaws Open from 0 to 50 mm
• Two clamps
• Dual contoured jaws

• Telescoping pole design
• 3/8”-16 male thread
• 3/8”-16 female threaded clamp
• 5/8” pin allows you to mount lights

• Load Capacity: 20kg
• Jaws Open from 0 to 5cm
• Mount Accepts 35mm Tubes

• Load Capacity: 20kg.
• Magnetic Quick Mount Receiver.
• Fits Round, Oval, and Square Tubes.
• Anti-Scratch Padding Tape.

• Anodised Aluminium Construction.
• Replaces Standard Handle.
• Increased Surface Area, Ergonomic Design.

• Jaws Have Multiple Contact Points
• 2 x 1/4"-20 and 2 x 3/8"-16 Sockets
• Clamping Range: 0 to 45 mm

• Load Capacity: 20 kg
• Clamping Range: 0 to 1.96"
• Tightening Knob
• 5/8" Baby Pin Stud
• 3/8"-16 (M10) Female Connection