Celestron CPC Deluxe 800 HD Computerized Telescope
Product #26307
SKU 11007
In stock with supplier Usually ships in 1 - 2 weeks

Celestron CPC Deluxe 800 HD Computerized Telescope

Product #26307 | SKU 11007
In stock with supplier Usually ships in 1 - 2 weeks

8.0" / 203.2mm Schmidt-Cassegrain, Focal Length: 2032mm, f/10

Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The CPC Deluxe 800 HD Computerised Telescope from Celestron features an EdgeHD Schmidt-Cassegrain optical system. This compound, or catadioptric, light-path employs a combination of mirrors and lenses that offer a large high-resolution aperture, a shorter tube length, and enhanced portability. This telescope has an 8" aperture, a focal length of 2032mm, and an f/10 focal ratio. The EdgeHD optics delivers pinpoint, aberration-free images even with the widest field eyepiece. These optics are designed to produce an extremely flat focal plane precise enough to match the strict tolerances of large commercial CCD detectors, allowing all stars to be in tight focus to the very edge of the chip. Mirror tension locks hold the primary mirror in place and reduce image shift. There are cooling vents to allow hot air to be released from behind the primary mirror. There is FASTAR compatibility for fast f/2 CCD imaging.

The optical path consists of a zero power corrector plate, a spherical primary mirror, and a secondary mirror along with a set of field flattening lenses integrated into the baffle tube. The resulting imaging plane is 3 times flatter than the field produced by a standard SCT telescope.

The StarBright XLT coatings are designed to produce fairly flat reflectivity across the spectrum, optimised for both CCD imaging and visual use. This high performance optical system utilises multi-layer, anti-reflective coatings and high transmission Water White glass for the corrector lens.

The OTA comes with a very useful 9x50 finderscope fitted to its exterior. Due to its wider field of view, this ancillary optic can offer assistance in locating objects to view with the main scope.

Normal image orientation for the EdgeHD design is upside-down and reversed. The 1.25" diagonal inverts this image so it is right-side-up, but reversed. This diagonal directly accepts 1.25" eyepieces. It is packaged with a 40mm Plossl eyepiece.

The dual fork arm mount is fully computerised with a database of over 40,000+ celestial objects, user definable filter limits and a "Solar System Align" that allows alignment on the Sun or Moon for daytime observing. The dual fork arm mount is a sturdy and reliable mount with a heavy-duty tripod featuring sturdy 2" stainless steel legs and an accessory tray. The software-assisted All-Star polar alignment feature allows the viewer to choose any bright star for alignment of the mount's polar axis, even if the North Star isn't visible. Large hand-knobs offer easy altitude and azimuth adjustments. A convenient remote hand controller allows you to view information hands-free. The NexStar programme's advanced pointing feature further improves the pointing accuracy. Additionally, extended meridian tracking will track continuously through the Meridian.

The internal GPS receiver automatically downloads the date and time from orbiting satellites and pinpoints the telescopes exact terrestrial location. The need to manually enter the date, time, longitude and latitude with possible human-error is eliminated. SkyAlign extends the positioning to provide pinpoint accuracy with the hand controller.

The All-Star polar alignment procedure, with Celestron's optional Pro Wedge, allows the choice of any bright star and the software then calculates and assists with polar alignment for more precise accuracy. NexRemote allows control of the computerised telescope from a personal computer. Everything that is usually done with the telescope's hand control can be done remotely from a PC or laptop. Software can be kept current with downloadable flash upgrades via the Internet.

A re-engineered drive train with a larger 6", 180 tooth brass gear, a .75" stainless steel worm gear, together with a unique steel and nylon roller bearing, rotating around a wide 9.8 track furnishes very smooth tracking accuracy indeed. The Permanent Periodic Error Correction (PEC) allows users to train out the worm gears periodic errors, while the mount retains the PEC recordings - a welcome enhancement for astronomical imagers. Redesigned electronics delivers constantly regulated power to the telescope even when not perfectly balanced giving it the capability of smooth tracking motion and pin- point accuracy.

Key Features

Optical Performance

  • Aperture: 8"
  • Magnification: 51 x
  • High quality SCHOTT glass
  • 1.57" / 40 mm Plossl eyepiece
  • Focal Length: 2032 mm / Focal Ratio: f/10
  • EdgeHD Schmidt-Cassegrain system for aberration-free imaging
  • Premium StarBright XLT coatings for enhanced light transmission
  • 1.25" diagonal providing right-side-up, laterally reversed orientation
  • Limiting Stellar Magnitude of 14 and a Light Gathering Power of 843 x

Construction Details

  • Aluminium tube
  • Mirror support knobs reduce image shift
  • Cord wrap software provides cord management
  • Die cast aluminium leg brace / eyepiece holder
  • Spring loaded RA worm block with enveloping brass teeth
  • Filtered tube vents release hot air from behind the primary mirror
  • Designated six-pin RJ-12 modular jack, ST-4 compatible guide port
  • Liquid Crystal Display Hand Control for operation of GoTo features
  • RS-232 port and cable for laptop/personal computer telescope control
  • Ergonomic design allows comfortable lifting and re-positioning of the telescope
  • Permanently programmable Periodic Error Correction, PEC, trains out the worm gears periodic errors
  • Motor drive: both axes with DC Servo motors with encoders and 0.1406 arc seconds motor resolution
  • Re-engineered drive train provides smoother tracking accuracy for long exposure astrophotography
  • Redesigned electronics delivers constantly regulated power to the telescope even when not perfectly balanced giving it the capability of smooth tracking motion and pin- point accuracy

9x50 finderscope

  • Assists in locating objects
  • All mounting hardware is included in kit

Computerised Dual Fork Arm Altazimuth Mount

  • Internal 16 channel GPS
  • Heavy duty stainless steel adjustable tripod: 2" legs, accessory tray
  • Cast aluminium dual fork arm mount with detachable HC cradle and 9.8 azimuth bearing
  • NexStar technology: 40,000+ object database, expanded information on 200+ objects, 100+ user-definable objects. Custom database lists famous deep-sky objects by name and catalog number
  • "All-Star" polar alignment uses any bright star for a quick and accurate Polar alignment, even if the North Star is not visible
  • Flash upgradeable hand control software and motor control units for downloading product updates over the Internet
  • Autoguide port, and auxiliary ports located on the electronic plate for long exposure astrophotography.
  • Double line, LED backlit 16-character LCD hand control simplifies GoTo operation. NexRemote software for computerised telescope control via RS-232 port. Flash upgradeable hand control, software, and motor control units. Product updates available over the Internet. Internal cable wiring for trouble-free setup and transportation.
  • Tracking rates: Sidereal, Solar and Lunar Tracking modes: Altazimuth, AEQ North and AEQ South Alignment procedures: SkyAlign, Auto Two-Star Alignment, Two-star Align, SolarSystem Align, AEQ North Align, AEQ South Align, One-Star Align Software precision: 24 bit, 0.08 calculations


Optical Design
8.0" / 203.2 mm
Focal Length
80" / 2032 mm
Focal Ratio
Resolving Power
Rayleigh: 0.69 arc/sec
Dawes: 0.57 arc/sec
Theoretical Minimum and Maximum Magnification
Min: 29x
Max: 480x
Dovetail Plate
Field of View
0.8°: 42' @ 1000 yd / 13.9 m @ 1000 m
Eyepiece Barrel Diameter
1.25" diagonal
Power Source
12V DC 2.5 Amps
Car battery adapter included
Secondary Mirror Obstruction
2.5" / 63.5 mm
By Area: 9.8%
By Diameter: 31.3%
Optical Tube Dimensions
Length: 18" / 457.2 mm
OTA: 43 lb / 19.5 g
Tripod & mount: 27 lb / 12.25 kg


Own or use this product?
Give it a rating


Own or use this product?
Give it a rating
Celestron CPC Deluxe 800 HD Computerized Telescope
RM Product #: