We are closed Friday 29th March & Monday 1st April for Easter

PreSonus Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalization (Each)

Product #76125 | SKU SCEPTURE-S6 | Presonus
This product is no longer available what does this mean?
Not currently for sale
Contact us for more information
This product is no longer available what does this mean?

Features

  • 6.5" Woofer and 1" Horn-Loaded Tweeter
  • Coaxial Transducer with Coherence Align
  • 200W RMS with Class D Amplification
  • 102 dB Max SPL
  • 32-bit/96kHz Active Floating-Point DSP

Related Products

Primacoustic London 12 Room Kit (Beige) Primacoustic London 12 Room Kit (Beige)
SAVE 12%
Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack) Pearstone 0.5 x 6" Touch Fastener Straps (Black, 10-Pack)
Primacoustic RX7-UF - Recoil Stabilizer (Single) Primacoustic RX7-UF - Recoil Stabilizer (Single)
Primacoustic RX7-HF - Recoil Stabilizer (Single) Primacoustic RX7-HF - Recoil Stabilizer (Single)
Primacoustic London 8 Studio Kit (Black) Primacoustic London 8 Studio Kit (Black)
Primacoustic London 12 Room Kit (Black) Primacoustic London 12 Room Kit (Black)
Pro Co Sound Excellines 1/4" TRS Male to 1/4" TRS Male - 10' Pro Co Sound Excellines 1/4" TRS Male to 1/4" TRS Male - 10'
Hosa SLW-333 Passive Stereo Signal/Speaker Selector Hosa SLW-333 Passive Stereo Signal/Speaker Selector
Hosa HSS-020 Pro 1/4'' Cable 20ft Hosa HSS-020 Pro 1/4'' Cable 20ft
Hosa HSS-015 Pro 1/4'' Cable 15ft Hosa HSS-015 Pro 1/4'' Cable 15ft
Hosa HPR-020 Pro 1/4'' to RCA Cable (20ft) Hosa HPR-020 Pro 1/4'' to RCA Cable (20ft)

Description

The Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalisation by PreSonus articulates nuances of your music that can't be reproduced by conventional designs. The Sceptre S6 features a panoramic soundstage and a wide dynamic range. The advanced coaxial design works integrally with a 32-bit/96 kHz, dual-core processor running Fulcrum Acoustic's TQ Temporal Equalisation Technology.

The Sceptre S6 features a 6.5" low/mid-frequency driver, a 1" horn-loaded tweeter and front-firing acoustic ports. The systems are biamplified, with each transducer powered by an independent 100W RMS, Class D power amplifier with an internal heat sink. Sceptre has an internal power supply and a blue power-indicator LED. The S6 studio monitor has a balanced XLR and a 1/4" TRS line-level input with an A-taper level control.

Coaxial systems, such as the S6, have both drivers on the same axis— providing a single point source for a consistent acoustic centre. This results in symmetry of response on both the horizontal and vertical axes, at any given angle. The crossover transition is, therefore, seamless at all angles.

Key Features:

Onboard TQ Temporal Equalisation by Fulcrum Acoustics

Each Sceptre monitor contains a 32-bit/96kHz, dual-core, active floating-point DSP chip that powers Fulcrum Acoustic's TQ algorithms. The TQ algorithms use fully addressable Finite Impulse Response (FIR) filters to eliminate horn reflections and to correct linear time and amplitude anomalies. Loudspeakers tuned with TQ provide a crisper stereo image, greater soundstage depth, more separation between the elements of a complex mix, increased resistance to feedback, more seamless transitions between distributed loudspeakers, and a less fatiguing listening experience.

Acoustic Space Control

The Acoustic Space Control is a second-order shelving filter centred at 100Hz. It can remain flat or attenuate by 1.5dB, 3dB, or 6dB— reducing the boundary bass boost that occurs when the monitor is placed near a wall or corner.

Acoustic Tuning Controls

The High-Frequency Driver Adjust switch can boost the tweeter by 1dB, or cut by 1.5dB or 4dB. The High-Pass switch rolls off the lows below a specified frequency, 60, 80, or 100Hz, at a slope of 12dB/octave. This control is important if you are using a subwoofer in conjunction with the Sceptre.

Input Sensitivity Control

A sensitivity control ranging from +4dBu to -10dBV helps you match the Sceptre to your mixer's outputs.

Thorough Protection Circuitry

RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Sceptre monitors also provide overheat protection, current-output limiting and subsonic protection. "Soft startup" amplifiers prevent damaging pops from sounding through the speakers when you power them up.

Specifications

Studio Monitor
Monitor Type Active 2-Way
Enclosure Bass-Reflex, Shielded
Drivers HF Driver: 1 x 1" / 2.54 cm Tweeter
LF Driver: 1 x 6.5" / 16.51 cm Woofer
Amplification HF Amplifier: Class-D Rated at 100 W
LF Amplifier: Class-D Rated at 100 W
Performance
Frequency Range 42 Hz to 23 kHz (at -10 dB)
52 Hz to 20 kHz (at -10 dB)
Maximum Sound Pressure Level (SPL) 102 dB
Protections and Limiting Fuse, Output Current Limiting, Peak Limiter, and Thermal Limiting
Signal Processing
AEQ 1 x HF Shelf: -4 to +1 dB
1 x LF Shelf: -6 to 0 dB
Filters High-Pass at 60 Hz
High-Pass at 80 Hz
High-Pass at 100 Hz
Connectivity
I/O 1 x 3-Pin XLR Balanced Analogue Input
1 x 1/4" (6.3 mm) TRS Balanced/Unbalanced Analogue Input
Digital Audio
Max Sample Rate/Resolution 96 kHz / 32-Bit

In The Box

  • PreSonus Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalisation (Each)
  • Power Cable

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: PreSonus Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalization (Each)
  • Manufacturer: Presonus
  • Model: S6
  • SKU: SCEPTURE-S6
  • RM Product #: 76125

Recently Viewed

View All