In production for over 10 years, the L18P300 is an industry standard.
The very stromg magnetic unit, with 15mm thick plates and specially designed suspensions ensure an excellent control of amplitude of over +/- 12millimeters. The special cooling system with forced air ventilation offer a great haet dissipation and the minimum levels of power compression available on the market. Voice coil construction, suapensions and cone materials are upgraded in order to withstand up to a Kilowatt RMS power.
- 4-inch, fiberglass inside/outside copper voice coil
- 2000W continuous program power handling
- 97 dB Sensitivity
- 35 Hz – 1.5 kHz Frequency range
- Forced air ventilation and 15mm top plate for minimum power compression
- Dual spider design with silicon based dampening control
- M-roll surround and exponential cone geometry
- The L18P300 finds its best application in both bass reflex and band pass system.
- Its capacity to reproduce extremely low frequency along with extraordinary definition make it a no compromise woofer in its category, ideal for both live and recorded music.
|Nominal Diameter||460 / 18 mm/inch|
|Rated Impedance||8 O|
|Program Power||2000 W AES|
|Power handling capacity||1000 W AES|
|Frequency Range||35 Hz ÷ 1000 Hz|
|Effective Piston Diameter||380 / 15 mm/inch|
|Max Excursion Before Damage (peak to peak)||40 / 1.6 mm/inch|
|Minimum Impedance||6.0 O|
|Voice Coil Diameter||100 / 4 mm/inch|
|Voice Coil Material||Copper|
|Voice Coil Winding Depth||23 / 0.9 mm/inch|
|Number of layers||inside / outside|
|Kind of layer||2|
|Top Plate Thickness||15 / 0.6 mm/inch|
|Cone Material||No pressed pulp|
|Surround Design||M - roll|
|Resonance frequency||33 Hz|
|BL Factor||23.5 T · m|
|Effective Moving Mass||180 g|
|Equivalent Cas air load||226 liters|
|Effettive piston area||0.113 m²|
|Max. linear excursion (mathematical)||7.8 mm|
|Voice - coil inductance @ 1kHz||1.9 mH|
|Overall Diameter||470 / 18.5 mm/inch|
|Bolt Circle Diameter||438 / 17.2 mm/inch|
|Bolt Hole Diameter||8 / 0.3 mm/inch|
|Front Mount Baffle Cut-out||416 / 16.4 mm/inch|
|Rear Mount Baffle Cut-out||416 / 16.4 mm/inch|
|Depth||209 / mm/inch|
|Volume occupied by the driver||6.5 / 0.23 liters/ft³|
|Net Weight||14 / 31.1 kg/lbs|
Australian Shipping Via DHL
DHL offers a great express shipping service to Australia from New Zealand. We are proud to be able to offer express shipping to main cities on the east coast of Australia, within the same timeframe ( If not quicker ) than local Australian courier companies. Prior to the Covid-19 outbreak, service standards for these main centers was overnight. However these services have been impacted greatly, and as such the overnight service has been suspended. Overnight shipping will likely resume once things have returned to normal.
Qualifying main centers include:
Whilst this service is extremely efficient and will likely be delivered within 1-2 days 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it doesn’t arrive within the specified time frame, in most cases it will be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcel boxes etc.