Sonnet Solo10G Thunderbolt 2 to 10GBase-T Ethernet Adapter has been discontinued, here are some related products you might like:
Sonnet Solo10G Thunderbolt 2 to 10GBase-T Ethernet Adapter
Features
- 10 Gb/s RJ45 Ethernet Port
- Replaceable Captive Thunderbolt 2 Cable
- Up to 10 Gb/s over Cat 6/6a Cables
- Up to 5 Gb/s over Cat 5e Cables
- Audio Video Bridging Support
Description
Get up to 10 Gb/s data transfer rates over your existing network cabling with the Solo10G Thunderbolt 2 to 10GBase-T Ethernet Adapter from Sonnet. This portable, bus-powered adapter features a 10 Gb/s RJ45 Ethernet port and a replaceable captive cable with a 20 Gb/s Thunderbolt 2 interface.
The Solo10G Thunderbolt 2 adapter can enable up to 10 Gb/s data speeds over Cat 6 or Cat 6a cables, or up to 5 Gb/s speeds over Cat 5e cabling. Housed in an aluminium shell, the adapter supports Audio Video Bridging, which is ideal for pro audio and video applications, while Energy Efficient Ethernet support helps to reduce power consumption. The adapter is compatible with both macOS and Windows systems.
Key Features:
NBASE-T Support
The Solo10G adapter supports the NBASE-T industry standard of 2.5/5 Gb/s link speeds, which enables multi-Gigabit Ethernet speeds over up to 328.1' of Cat 5e or better cabling when used with an NBASE-T-compatible switch or router. This allows you to deploy the same adapter across your organisation for users supported by different Ethernet cabling infrastructures.
Cost Effective
Low-cost adapter connects to 10GbE infrastructure via inexpensive Cat 6 or Cat 6a cables at distances up to 180.4' or 328.1', respectively.
20 Gb/s Thunderbolt 2 Interface
Connects to any Thunderbolt 2 computer port, or at the end of a Thunderbolt 2 device daisy chain.
Replaceable Captive Cable
Equipped with a captive cable, the Solo10G adapter's Thunderbolt 2 connector is designed to remain firmly connected without being soldered in place. Should the cable ever break, it can easily be replaced with an approved replacement cable available from Sonnet or a Sonnet-authorised reseller.
Secure First
The Solo10G Thunderbolt 2 adapter was engineered with essential security features. Incorporating hardware encryption, the Sonnet network adapter is protected against malicious firmware modification that could allow covert computer access. Any unauthorised attempt to modify the firmware renders the adapter inoperable. These security features prevent the Solo10G adapter from being reprogrammed without the use of a secure encryption key.
Advanced Features, Intelligent Operation
The Solo10G Thunderbolt 2 adapter attains its high throughput performance and low-host CPU utilisation through functions such as flow control, 64-bit address support for systems using more than 4GB of physical memory, and stateless offloads such as TCP, UDP, and IPv4 checksum offloading. These processes enable your computer to perform better while large file transfers or high I/O operations take place. This Sonnet adapter supports the Energy Efficient Ethernet standard (IEEE 802.3az), which reduces the adapter's power demands on your computer.
AVB Support
Audio Video Bridging (IEEE 802.1Qav, AVB) support makes the adapter ideal for use in pro audio and video applications where synchronisation of data streams is critical.
Pocketable, Bus-Powered, and Quiet
Measuring just 3.1 x 4.5 x 1.1", the pocketable and bus-powered Solo10G is a truly portable device. Wrapping the latest technologies in a rugged aluminium case, Sonnet designed a cool-running adapter that doesn't need a fan, allowing for quiet and energy-efficient operation.
Simple Setup
Connect the Solo10G adapter to your computer, then connect the adapter to a network switch or directly to 10GbE-enabled storage. You can then configure the adapter's settings through the macOS Network control panel or Windows Device Manager.
Specifications
Connectivity | |
Networking Ports | 1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) |
Host Connection | Thunderbolt 2 |
General | |
Supported IEEE Standards | 802.1qav, 802.3az |
Operating System Support | Windows, macOS/OS X |
Jumbo Frames Support | 16,352 Bytes |
Transfer Rates | Thunderbolt 2: 20 Gb/s |
Electrical | |
Power Source | Bus Powered |
Environmental | |
Operating Temperature | 32 to 95°F / 0 to 35°C |
Physical | |
Material of Construction | Aluminium |
Certifications | RoHS, as per Manufacturer |
Cable Length | 1.64' / 0.5 m |
Dimensions | 4.49 x 3.13 x 1.07" / 114 x 79.5 x 27.2 mm |
Weight | 0.53 lb / 0.24 kg |
In The Box
- Sonnet Solo10G Thunderbolt 2 to 10GBase-T Ethernet Adapter
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Sonnet Solo10G Thunderbolt 2 to 10GBase-T Ethernet Adapter
- Manufacturer: Sonnet
- Model: SOLO10G-TB2
- SKU: SOLO10G-TB2
- RM Product #: 89140