Tascam MM-2D-X 2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer
This product is no longer available
Features
- For PA, SR, and Pro Audio Environments.
- 2 Analogue 3-Pin XLR Mic/Line Input/Output.
- 4 Dante Inputs / Outputs.
- Flexible Routing.
- PoE (Power over Ethernet) Power Supply.
Description
The Tascam MM-2D-X 2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer is a compact half-rack convertor that can be used to convert 2-channel mic/line input/output signals on 3-pin XLR connectors into 4 Dante channels or the other way around for pro-audio applications.
The MM-2D-X Input/Output Dante Convertor features level control and is compatible with Dante Domain Manager software, which offers security functions, enables the use of wide-area networks, and provides easy access to Dante systems using already established network infrastructures. With AES67 mode, connection to AES67 network systems is also possible. Two installation brackets are included.
Key Features:
- 2 analogue outputs on 3-pin XLR connectors
- 4 Dante inputs/outputs
- Supports PoE (Power over Ethernet)
- Sample rate up to 24-bit / 96 kHz
- Supports Dante daisy-chain, which allows two Dante Compact Processor models to be connected without a network switch
- Compatible with Dante Domain Manager and Dante AES67 mode
- Flexible scene preset function allows you to work in different area situations (up to 50 presets)
- Two types of user-control software available for Windows/Mac/iOS/Android devices:
- TASCAM DCP CONNECT, for integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
- TASCAM EZ CONNECT, for end-users: simple app design for only the necessary functions such as area-volume settings, etc.
- Remote control via Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor digital input/output signals
- Configurable reference level (via remote control only)
- Surface-mount adapters for installation under desks included
Specifications
| General | |
| Formats Supported | 44.1/48/88.2/96 kHz, 16/24-Bit, 2 Channels |
| Input/Output | |
| Connector | RJ-45 |
| Transmission Protocol | Dante |
| Gigabit Ethernet | 1000 BASE-T (IEEE 802.3ab) |
| Cable | Category 5e or Faster STP Cables |
| Analogue Inputs | |
| Connector | 3-Pin XLR (1: Gnd, 2: Hot, 3: Cold) |
| Minimum Input Level | -74 dBu |
| Maximum Input Level | +26 dBu |
| Input Impedance | 2.0 kOhms or Higher |
| Analogue Outputs | |
| Connector | 3-Pin XLR (1: Gnd, 2: Hot, 3: Cold) |
| Nominal Output Levels | +4 dBu (when Ref. Level not −9 dBFS) +6 dBu (when Ref. Level set to −9 dBFS) |
| Maximum Output Level | Switchable: +15 dBu (Ref. Level: −9 dBFS) +18 dBu (Ref. Level: −14 dBFS) +20 dBu (Ref. Level: −16 dBFS) +22 dBu (Ref. Level: −18 dBFS) +24 dBu (Ref. Level: −20 dBFS) |
| Output Impedance | 200 Ohms or Lower |
| Audio Performance | |
| Mic In to Dante Out | Mic Amp EIN (Equivalent Input Noise): -125 dBu (150 Ohms, 22 kHz LPF+A, JEITA) |
| Frequency Response | ±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA) ±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA) |
| Distortion | 0.005 % (when −1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Signal to Noise Ratio | 105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Dynamic Range | 105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Frequency Response | Dante In / Line Out: ±0.5 dB: 20 Hz to 20 kHz (44.1/48 kHz Sampling Frequency, JEITA) ±0.5 dB: 20 Hz to 40 kHz (88.2/96 kHz Sampling Frequency, JEITA) |
| Distortion | 0.005 % (when -1 dBFS Input, 44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Signal to Noise Ratio | 105 dB (44.1/48/88.2/96 kHz Sampling frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Dynamic Range | 105 dB (44.1/48/88.2/96 kHz Sampling Frequency, JEITA) |
| Other Features | |
| Power | PoE Class 0 Tascam PS-P1220E AC Adapter (Sold Separately) |
| Power Consumption | 6 W |
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Dimensions (W x H x D) | 8.4 x 1.8 x 5.4" / 21.4 x 4.4 x 13.6 cm |
| Weight | 31.0 oz / 878.0 g |
In The Box
- Tascam MM-2D-X 2-Channel Mic/Line Input/Output Dante Convertor with Built-In DSP Mixer.
- Installation Brackets.
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Tascam MM-2D-X 2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer
- Manufacturer: Tascam
- Model: MM-2D-X
- SKU: TASCAMMM-2D-X
- RM Product #: 65769
Recently Viewed
View AllTascam MM-2D-X 2-Channel Mic/Line Input/Output Dante Converter with Built-In DSP Mixer
Loading...
