Teradek Bolt 500 LT TX/RX (HDMI)
Features
- Transmitter includes HDMI input
- Receiver includes a single HDMI output
- Backward compatible
- AES 128 encryption to protect your video feed
- Multicasting to up to 4 receivers
Description
Teradek Bolt LT 500 HDMI Wireless Transmitter and Receiver takes Teradek’s industry-leading wireless performance and packages it into an affordable, streamlined series of zero-delay wireless video systems. The LT line is available in 500ft. or 1000ft. max-range models, with the LT 500 offering external antennas on the transmitter for enhanced wireless performance.
Not only lighter, but smaller too, the Bolt LT is the essential, no-frills high performance wireless video system. Each transmitter includes a single 3G-SDI or HDMI input with matching looping output, while the receiver includes a single 3G-SDI or HDMI output. Several ⅜” and ¼”-20 mounting points allow Bolt LT to mount seamlessly to any camera rig and integrated bi-directional Sony L-series or Canon LP-E6 pass-through battery plates allow you to power your system far more easily than before.
Key Features
- Offers external antennas on the transmitter to enhance performance
- Lighter and smaller
- Transmitter includes HDMI input with matching looping output
- Receiver includes a single HDMI output
- Several ⅜” and ¼”-20 mounting points allow Bolt LT to mount seamlessly to any camera rig
- Integrated bi-directional Sony L-series or Canon LP-E6 pass-through battery plates
- Backward compatible with the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the powerful new Bolt XT
- AES 128 encryption to protect your video feed
- Multicasting to up to 4 receivers
- Offers the same wireless performance as the XT models
Specifications
Bolt LT 500 Transmitter | |
Video | |
Video Inputs | HDMI (Type A receptacle) |
Video Outputs | HDMI Loop-out (Type A receptacle) |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. |
Colour Sampling | HDMI: RGB 4:4:4, 8-bit |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions | |
Supported Resolutions | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) |
Video Processing | |
Video Compression | Visually lossless |
Colour Correction | CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
Audio Processing | |
Audio Compression | 48kHz 24-bit PCM |
Inputs | |
Audio Input | Embedded Audio Input |
Physical | |
Dimensions | 2.4 x 6.6 x 10.15 cm (0.95 x 2.6 x 4.47 inches) |
Weight | 0.226 kg (0.49 lbs) |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
Mountability | Multiple mounting options with M3 and 1/4" holes 3/8" ARRI style accessory mount |
Interfaces | |
Http | None |
Configuration Interfaces | None |
Switches | On/Off and Reset Switch |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
USB Interface Functionality | Upgrade via Mini-USB |
Network | |
Wireless | Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz |
Rf Channel Selection | Auto only (NOT configurable) |
Encryption | AES-128 |
Rf Power | 17dBm EIRP |
Range | Up to 500ft line of sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power | |
Power Input | 2-Pin Connector 7-28 VDC |
Battery | None |
Nominal Power Consumption | 7.3 Watts (Measured at 1080p60) |
Environmental | |
Operating Temperature | 0 ~ 40 deg-C |
Bolt LT 500 Receiver | |
Video | |
Video Outputs | HDMI Type-A receptacle USB 3.0 micro B receptacle |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. |
Colour Sampling | HDMI: RGB 4:4:4, 8-bit |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions | |
Supported Resolutions | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) |
Video Processing | |
Video Compression | Visually lossless |
Test Pattern Generator Support | Yes |
Colour Correction | CDL/1024 1D LUT (supports 10-bit color) 33x33x33 3D LUT (supports 10-bit color) |
Audio Processing | |
Audio Processing | 48kHz 24-bit PCM |
Inputs | |
Audio Input | Embedded Audio Input |
Physical | |
Dimensions | 2.5 x 8.5 x 11.4 cm (1 x 3.4 x 4.5 inches) |
Weight | 0.288 kg (0.63 lbs) |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB Plastic Cap |
Mountability | Multiple mounting options with M3 and 1/4" holes |
Interfaces | |
HTTP | None |
Configuration Interfaces | No OLED Screen There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick |
Switches | On/Off and Reset Switch |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
USBInterface Functionality | Upgrade via Mini-USB |
Network | |
Wireless | Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz |
Rf Channel Selection | Auto only (NOT configurable) |
Encryption | AES-128 |
Rf Power | 15dBm EIRP |
Range | Up to 500ft line of sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power | |
Power Input | 2-Pin Connector 7-17 VDC |
Battery | None |
Nominal Power Consumption | 9 Watts (Measured at 1080p60) |
Environmental | |
Operating Temperature | 0 ~ 40 deg-C |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek Bolt 500 LT TX/RX (HDMI)
- Manufacturer: Teradek
- Model: TD-10-1905-NZ
- SKU: TD-10-1905-NZ
- RM Product #: 52215
- Warranty: 1 year manufacturer warranty