Batteries & Power

Connect D-Tap Sources to Your Device D-Tap to 4-Pin XLR Female Connectivity Coiled Cable, Right-Angle Connectors Extends from 50 to 127 cm in Length

• Charge Select Li-Ion Batteries from USB
• Output Range: 7.2 to 8.4V, 700mA
• Includes 11 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Fits Sony NP-F type batteries to provide greater battery life for your camera rig.
• Provides different output ports, including a 12V DC output port and a 7.4V DC output port.
• LED indicator for low battery warning.
• Rubber pads on the bottom for a more stable installation.

• Charge Select Li-Ion Batteries from USB
• Output Range: 7.2 to 8.4V, 700mA
• Includes 11 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Charge Select Li-Ion Batteries from USB
• Output Range: 3.6 to 4.2V, 700mA
• Includes 9 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Replacement for Panasonic DMW-BCM13E
• Rechargeable Lithium-Ion Battery
• Capacity: 3.6V, 1150mAh

• For Select a9/a7/a7S/a7R & a6600 Cameras
• Run Camera to Kondor Cine Battery Plates
• 41 to 91 cm Coiled Cable
• Regulated 8V Output

• Male D-Tap to L-Series Dummy Battery
• Braided 40 cm to 90 cm Coiled Cable
• 12 to 17 VDC Input, Regulated 8V Output
• Power Gear or Camera with D-Tap Source

• 4-Bay V-Mount Charger
• Simultaneous Fast Charging
• 3A/6A Charging Output, 100W
• 3.5" LCD, LED Indicators
• Built-In Carrying Handle
• Worldwide Compatible 90-240 VAC Input

• Power Camera from D-Tap Battery
• D-Tap to USB-C Connectors
• 16" Braided Cable Length
• Built-In Current Regulator

• Power Monitor, Light, Accessory
• D-Tap 5.5 x 2.5mm to DC Barrel
• Coiled Cable, 40 to 127 cm in Length
• Right-Angle Connectors

• Male D-Tap to L-Series Dummy Battery
• Coiled Cable
• Power Gear or Camera with D-Tap Source

• For Teradek Bolt, Z-CAM, Select RED
• For Select ARRI, Paralink, Other Systems
• Extends to 50 cm in Length
• Works with D-Tap Source
• Unregulated

• Attaches Directly to the Camera
• No Extra Cabling Required

• IDX V-Mount
• 12V power
• D-Tap connectors

• Attaches to Rear of FX6 Camera
• Supports V-Mount Battery
• Access to BP-U Battery Allows Hot Swaps
• 3 x D-Tap Ports, Protective Digital Fuse

• 14.8 VDC, 98Wh, 6600mAh Battery Pack
• For EOS C200, C300 Mark II, C500 Mark II
• 1 x D-Tap and 1 x USB Port
• D-Tap Supports SMBUS Communication
• 4-LED Power Gauge

• For Sony NP-FZ100-Powered Devices
• USB Type-C to Dummy Battery, 24" Cable
• Regulated 8-8.4V, 3.5A Max Output
• Transmits Status Data to Camera

• Exclusively for SWIT batteries
• SONY&RED power info display
• Provide 2x D-tap sockets
• Slim and light weight, balanced install
• Multiple protection circuit

• Power 6K/6K Pro with 2 x NP-F570 Batteries
• Adds up to 3+ Hours of Shooting Time
• Charges Batteries with 12V Camera Input
• Creates Grip on Bottom of Camera
• Lightweight Carbon Fibre Design

• Fully compatible with NP-F batteries
• Aluminium alloy/ gold-plated electrical contacts
• Allows to access two devices
• Supports bi-directional input and output
• Comes with USB-C mode

• Mounting solution for V-mount batteries
• Tool-free installation
• Built-in 1/4"-20 threaded hole

• Cable Terminates in 4-Pin XLR Connector
• Requires Separate IEC Cable

• Power BMPCC 6K/4K with Battery
• 1.2 m in Length
• Works with Gold Mount or V-Mount Battery
• Black Colour

• Attaches Directly to Rear of the Camera.
• Connects via 19.5 VDC Output Cable.
• 4-Pin XLR Input for Hot-Swapping.
• Two D-Tap Outputs.

• Slim 14.8V, 98Wh Lithium-Ion Battery
• 1.5" Thin, 1.4 lb Weight
• Constant 12A Draw, 16A Peak
• RFID Battery Vitals Transmitter
• Modular Design with Less Cabling

• For Use with Sony FX9 and FX6
• 1 x D-Tap Male Connector
• 1 x Right-Angle DC Male Connector
• Coiled Cable Extends from 35 to 60cm
• Ultra-Durable & Nylon-Braided Cable

• Coiled Cable Stays Neat
• Extends from 39 to 100cm

• Made for International Outlets.
• 220V Power Output.
• 2 x AC Outputs | 4 x 2.1A USB Ports.
• Compatible with ONsite D-Tap Battery.
• Portable Design.

• 4-Channel Simultaneous Charging
• 2A Charging Current per Channel
• Snap-On Exchangeable DV Plates
• Mixed Types of DV Batteries Charging
• U/F/D/B/C/I/V/E Plates Supported
• 4-LED Charging Indicators

• V-Mount Battery Distribution Box
• Fits Between Battery & Camera Mount
• 2x 2-Pin LEMO-Compatbile Outputs
• 2x D-Tap Outputs
• 5V USB Output

• Attaches to the Rear of the Camera.
• Supports V-Mount Battery.
• Access to BP-U Battery Allows Hot Swaps.
• 3 D-Tap Ports & Protective Digital Fuse.

• 2 x 147Wh Li-Ion V-Mount Batteries
• GPM-X2S Dual-Battery Mini Charger
• 14.8V Output, 5.9-Hour Runtime
• D-Tap Output/Input, USB Type-A Output
• Ultracompact Design

• Accepts Gold Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

• Standard V-mount
• PD protocol compatible
• USB-C input/output
• D-Tap and DC power port
• Mounts to 15mm LWS rod system

• Hot Swap Battery Adapter
• Mounts on V-Mount Battery Plate
• Four Unregulated D-Tap Outputs

• Built-In Rechargeable Li-Ion Battery
• Control Lamp Output without NANLINK App
• 4 Analogue Control Buttons, On/Off Switch
• Monochrome LCD Display
• Runtime: 1 Hour at 100% Brightness

• For Nikon EN-EL15-Powered Devices
• USB Type-C to Dummy Battery
• Straight Cable

• 14.8V, 70Wh, Lithium-Ion V-Mount Battery
• Coiled D-Tap to 2-Pin Power Cable
• D-Tap Wall Charger
• 7.4 VDC Output, 8A Continuous Draw
• Quick Release Plate with 1/4"-20 Screw
• 2 x D-Tap & 2 x USB Outputs

• Accepts V-Mount Batteries
• 20.32 cm RED Epic/Scarlet LEMO Connector Cable
• D-Tap Port for Accessory Power

• 8V Regulated Output

• IDX-V-Mount battery plate
• DC connector
• Two D-Tap connectors
• Minimal cable excess