Batteries & Power
AJA OG-X-PS Power Supply
- 2RU frame with capacity for up to 20 openGear cards
- 600 watt power supply with integral cooling, optional 2nd power supply
- Front LCD display for name, IP address and fault identification
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,770.00
Accsoon ACC04 NP-F Battery Adapter
- For PowerCage II & PowerCage Pro II
- Supports Sony NP-F Battery
- 2 x USB-C Charging Ports
- 1 x USB-A Charging Port
- 1/4"-20 Mount
Usually ships in 2 - 3 weeks
You Pay:
$43.95
Accsoon D-Tap to 2-Pin DC Power Cable (1m)
- Connects SeeMo Pro to V-Mount Battery
- Reliable and Efficient Power Supply
- 1m Length for Flexible Setups
- Optimised Performance
Usually ships in 2 - 3 weeks
You Pay:
$34.95
ANDYCINE Multi-Output V-Mount Battery Plate with Rod Mount, Cheese Plate, and Mixed Cables
- USB, 7.2 / 12 VDC Barrel, D-Tap Outputs
- USB to DC Barrel Cable
- 7.2 and 12 VDC Barrel Cables
- LP-E6 Dummy Battery Adapter Cable
- 15mm LWS Rod Clamp
- Cheese Plate on Rear
In stock
Ships tomorrow
You Pay:
$179.00
ANDYCINE USB Type-C PD Power Cable for BMPCC 4K/6K
- For Blackmagic Pocket Cine Camera 4K/6K
- For USB Type-C Power Bank or AC Adapter
- 18" USB Type-C to 2-Pin LEMO Cable
- Enables Extended Capture Time
- Requires 12V, 3A Minimum Power
Usually ships in 4 - 6 weeks
You Pay:
$40.95
ANDYCINE Dual NP-F to V-Mount Adapter Plate with Power Gauge
- Power V-Mount Gear with NP-F Battery
- For 2 Sony-Type L-Series/NP-F Batteries
- Built-In 4-LED Power Gauge
Usually ships in 4 - 6 weeks
You Pay:
$40.95
ANDYCINE Coiled D-Tap to BMPCC 4K Power Cable
- For Blackmagic Pocket Cinema Camera 4K
- 1m Length Fully Extended
In stock
Ships tomorrow
You Pay:
$43.95
ANDYCINE D-Tap to 2-Pin DC Power Cable with Intelligent Circuit Protection (50cm)
- 50cm Long D-Tap to 5.5mm Barrel Cable
- Automatic Polarity Correction
- Gold-Plated Safe D-Tap Pins
- Injection-Moulded D-Tap Construction
In stock
Ships tomorrow
You Pay:
$37.95
ANDYCINE D-Tap to LEMO 2-Pin Male Power Cable (50cm)
- Select Z-CAM, RED & ARRI Camera Systems
- Power Other Devices That Require 14.8V
- Power Devices with LEMO 2-Pin Input
In stock
Ships tomorrow
You Pay:
$37.95
ANDYCINE Male D-Tap to 4-Port Female D-Tap Splitter Cable (Straight)
- Converts a Single D-Tap Output to Four
- Up to 10A Maximum Draw
- 24" Straight Cable
Usually ships in 4 - 6 weeks
You Pay:
$34.95
ANDYCINE Male D-Tap to 4-Port Female D-Tap Splitter Cable (Coiled)
- Converts a Single D-Tap Output to Four
- Up to 10A Maximum Draw
- Coiled Cable is 120cm Fully Extended
Usually ships in 4 - 6 weeks
You Pay:
$37.95
ANDYCINE 12V 2.1mm DC Coiled Power Cable for Blackmagic Pocket 4K & 6K
- 2.1mm Straight DC Barrel Connector
- Dedicated 2-Pin Camera Connector
- 40 to 120cm Length
- Strain Relief
In stock
Ships tomorrow
You Pay:
$38.95
ANDYCINE D-Tap to USB/DC Barrel/D-Tap Power Adapter/Converter
- Convert D-Tap Input to Multiple Outputs
- 1 x 11 to 17 VDC Male D-Tap Input
- 11 to 17 VDC D-Tap, 8 VDC Barrel Outputs
- 1 x 5V USB Type-A Output
In stock
Ships tomorrow
You Pay:
$31.95
ANDYCINE D-Tap to USB & D-Tap Output Adapter
- D-Tap Male Input
- 1 x 5V, 1.6A USB Output
- 1 x D-Tap Female Output
- 11-17V, 10A Power Input
- Compact, Lightweight Design
In stock
Ships tomorrow
You Pay:
$25.95
ANDYCINE V-Mount Battery Plate for Sony FX9
- Attaches to Rear of Camera with 2 Screws
- Connects to Camera via Integrated Cable
- Leaves Access to BP-U Slot for Hot Swaps
- 2 x D-Tap Ports and Protective Fuse
- Aluminium Construction
Usually ships in 4 - 6 weeks
You Pay:
$309.00
ANDYCINE D-Tap to Locking DC 2.5mm Right-Angle Straight Cable (1m)
- For Powering Monitor, Light, Accessory
- D-Tap to Locking 2.5mm DC Barrel
- Barrel Lock Prevents Disconnection
- Straight Cable, 1m Length
- Right-Angle Connectors on Both Ends
- Black Colour
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$41.95
ANDYCINE D-Tap to Locking DC 2.5mm Right-Angle Coiled Cable (0.3 to 1m)
- For Powering Monitor, Light, Accessory
- D-Tap to Locking 2.5mm DC Barrel
- Barrel Lock Prevents Disconnection
- Coiled Cable, 0.3 to 1m Length
- Right-Angle Connectors on Both Ends
- Black Colour
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$40.95
Atomos D-Tap To DC Barrel Coiled Cable
Power the Monitor from External Battery, Overrides Attached Batteries
On Backorder
You Pay:
$79.00
Blackmagic Design Power Supply for Mini Converter
Replacement Power Supply - for any Mini Converter in the Series
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$94.95
Blackmagic Pocket Cinema Camera Battery Grip for Cinema Camera 6K/6K Pro
- Power 6K/6K Pro with 2 x NP-F570 Batteries
- Adds up to 3+ Hours of Shooting Time
- Charges Batteries with 12V Camera Input
- Creates Grip on Bottom of Camera
- Lightweight Carbon Fibre Design
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$229.00
Blackmagic Design URSA Power Supply
- Cable Terminates in 4-Pin XLR Connector
- Requires Separate IEC Cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$229.00
Blackmagic Design V-Lock Plate for URSA Studio Viewfinder
- Secure URSA Viewfinder
- Includes Mounting Screws
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$87.95
Blackmagic Pocket Cinema Camera 4K DC Cable Pack
Power your Pocket Cinema Camera 4K from a variety of different power sources
In Stock with Supplier
Usually ships in 2 - 3 working days
$87.95
You Pay:
$85.00
$87.95
Blackmagic Design Power Supply for Video Assist
- International socket adapters
- Supplies AC power to Video Assist
- Recharges the dual LP-E6 batteries
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$43.95
Blackmagic Design D-Tap Power Cable - 28"
An 18" D-Tap power cable for Cinema Camera & HyperDeck Shuttle.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$37.95
Blackmagic Design Power Supply for Pocket Cinema Camera
- Supplies Power to Pocket Cinema Camera
- Also Recharges Battery in the Camera
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$77.95
Blackmagic Design URSA V-Lock Battery Plate
- Attaches Directly to the Camera
- No Extra Cabling Required
In Stock with Supplier
Usually ships in 2 - 3 working days
$149.00
You Pay:
$145.00
$149.00
Blackmagic Design 12V Power Supply for Pocket Cinema Camera 4K (30W)
- AC to 12 VDC.
- 2-Pin Locking Connector.
- Up to 30W of Power.
- Set of Three International Plug Adapters.
In stock
Ships tomorrow
You Pay:
$56.95
Blind Spot Gear 12V Power Pipe Version 2
- Right-Angle USB-C Input Connector
- Right-Angle DC Barrel Output Connector
- 11.8 to 12.2V Voltage Range
- Five DC Adapters Included
- Cable Tie Mounts, Hook-and-Loop Strap
- Max 3A Current, 30W Power Constant
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$53.95
Blind Spot Gear BMPCC Power Pipe Version 2
- Works with All BMPCC Models
- 1 x USB-C PD Connector
- 1 x Weipu SF61B/S2 Connector
- 11.8 to 12.2V Range, Max 3A Peak Power
- Cable Length: 18"
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Cameo Power Extension Cable IP65 (20m)
20 meter Cameo Power Extension Cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$129.00
Cameo Power Extension Cable IP65 (10m)
10 meter Cameo Power Extension Cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$69.95
Cameo Power Extension Cable IP65 (5m)
5 meter Cameo Power Extension Cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$37.95
Cameo Power Extension Cable IP65 (3m)
3 meter Cameo Power Extension Cable
Usually ships in 2 - 3 weeks
You Pay:
$45.95
Cameo Power Extension Cable IP65 (1m)
1 meter Cameo Power Extension Cable
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$9.95
Canon Single Battery Charger for EOS C300 Mark II, C200, and C200B Batteries
- Single Battery Bay
- Detachable AC Power Cord
- Battery Charge Indicator
Contact us for an ETA
You Pay:
$609.00
Core SWX D-Tap to LEMO Power Cable for Canon C300 Mark II (0.6m)
- 11-28 VDC Input
- 9.2 VDC, 2A Output
Usually ships in 3 - 4 weeks
You Pay:
$189.00
Core SWX Sharkfin Battery Plate for V-Mount Camera
- V-Mount Hot Swap/Shark Fin Plate
- For Camera with V-Mount
- 2 x D-Tap Accessory Outputs
- 11 to 17 VDC Input/Output
- Unregulated Output
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,095.00
Core SWX NANO Micro 147Wh 2-Battery Kit with Dual Travel Charger (V-Mount)
- 2 x 147Wh Li-Ion V-Mount Batteries
- GPM-X2S Dual-Battery Mini Charger
- 14.8V Output, 5.9-Hour Runtime
- D-Tap Output/Input, USB Type-A Output
- Ultracompact Design
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$1,350.00
Core SWX Direct Connect Helix Battery Plate for ARRI ALEXA/ALEXA LF (V-Mount)
- Plate Connects Directly to Camera
- For ARRI ALEXA and ALEXA LF Cameras
- 2 x D-Tap Outputs
- 11 to 34 VDC Input/Output
- Compatible with Helix Battery Packs
Usually ships in 3 - 4 weeks
You Pay:
$495.00
Core SWX Direct Connect Helix Battery Plate for ARRI ALEXA 35 (V-Mount)
- For ARRI ALEXA 35 Camera
- Plate Replaces B-Mount on Camera
- 20 to 34 VDC Input/Output
- Only Compatible with Helix Battery Packs
Usually ships in 3 - 4 weeks
You Pay:
$385.00
Core SWX Gold Mount Battery Plate for Canon C300 Mark II
With a regulated DC Camera Connection, and 2 x Unregulated D-Tap Outputs
Usually ships in 1 - 2 weeks
You Pay:
$349.00
Core SWX Gold Mount to Gold Mount Adapter
With 2 x D-Tap Outputs, Fits Between Battery and Plate
Usually ships in 1 - 2 weeks
You Pay:
$329.00
Core SWX EVO-MOD4L Power Distribution Module for JetPack EVO
With 2 x 12V 2-Pin LEMO Outputs, 1 x 24V 3-Pin Fischer Output, Won't Obstruct RED DSMC2 I/O Module
Usually ships in 1 - 2 weeks
You Pay:
$369.00
Core SWX EVO-MOD12L Power Distribution Module for JetPack EVO
3 x 12V 2-Pin LEMO Outputs, Won't Obstruct RED DSMC2 I/O Module
Usually ships in 1 - 2 weeks
You Pay:
$319.00
Core SWX Charger for V-Mount & Powerbase Batteries
Charges any of our battery packs (excluding Hypercore Prime) through the powertap port on the battery while providing a quicker charge current.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$66.95
Core SWX P-Tap cable for Blackmagic Cinema Camera (45-120 cm)
This cable extends 45cm through to 120cm.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$62.95
Core SWX P-Tap cable for Panasonic CGA-D54 (46-120 cm)
Coiled Powertap Cable to Panasonic CGA-D54 battery block, ptap regulated 45cm extends to 120cm.
Usually ships in 3 - 4 weeks
You Pay:
$139.00
Core SWX P-Tap to 4-Pin XLR Cable (70 cm)
Converts PowerTap Male to 4-pin XLR Female over a 70cm cable.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$67.95
Core SWX P-Tap Cable for Panasonic GH4 with XLR
Dual purpose power cable that allows you to connect a D-tap power source either to the Panasonic GH4 camera or to the YAGH Interface Module.
Usually ships in 3 - 4 weeks
You Pay:
$169.00