Teradek Bolt 3000 XT SDI/ HDMI Wireless TX/ RX
Features
- Backward compatible
- Professional software features
- Dual input and output (SDI + HDMI)
- 1000/3000 receivers feature integrated
Description
Teradek Bolt XT 3000 SDI/ HDMI Wireless Transmitter and Receiver satisfies the needs of the most discerning professionals, from powerful software tools and rock-solid performance to smart power options and backward compatibility. Available with a maximum range of 500ft, 1000ft, 3000ft, or 10,000ft, the new Bolt XT line offers a professional solution for every budget. A key feature of the Bolt XT is its backward compatibility with Bolt 500, 1000, 3000, Sidekick II, and 703 Bolt, giving users more flexibility building onto their existing systems or linking with others already on set. Unlike alternative wireless video systems, Bolt XT includes a unique AES 128 encryption algorithm to protect your video footage, ensuring that only authorized receivers can connect to your transmitter.
Each transmitter includes an HDMI, 3G-SDI and looping 3G-SDI output. Receivers feature an HDMI output as well as dual 3G-SDI outputs. While wireless performance is critical on set, so are practical mounting options that ensure optimal performance.
Key Features
- Backward compatible with 3rd generation Bolt, Sidekick II, Bolt LT, and 703 Bolt
- Professional software features: 3D LUTs, 5GHz spectrum analyzer, manual channel selection
- Dual input and output (SDI + HDMI) and SDI loop on the TX
- 1000/3000 receivers feature integrated, internally-wired battery plates with pass-through power
Specifications
Bolt XT 3000 SDI/HDMI Wireless TX | |
Video | |
Video Inputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) 1 x Type A receptacle HDMI |
Video Outputs | 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC) |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions | |
Supported Resolutions | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) |
Video Processing | |
Video Compression | visually lossless |
Colour Correction | CDL/1024 1D LUT (supports 10-bit colour) 33x33x33 3D LUT (supports 10-bit colour) |
Audio Processing | |
Audio Compression | 48kHz 24-bit PCM |
Physical | |
Dimensions | 24 x 66 x 101.5 mm |
Weight | 226g |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
Mountability | Multiple mounting options with M3 and 1/4" holes 3/8" ARRI style accessory mount |
Interfaces | |
Http | None |
Configuration Interfaces | None |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows USB Functionability Upgrade via Mini-USB |
Network | |
Wireless | Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz (20MHz and 40MHz channels) |
Rf Channel Selection | Auto and Confirgurable Channel Selection |
Encryption | AES-128 |
Rf Power | 22dbm EIRP(with two 5dbi TX antennas) |
Range | Up to 3000ft line of sight |
Unicast Multicast | Unicast/ Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power | |
Power Input | 2-Pin Connector 7-28 VDC |
Battery | None |
Nominal Power Consumption | 7.5 Watts (Measured at 1080p60) |
Environmental | |
Operating Temperature | 0 ~ 40 deg-C |
Bolt XT 3000 SDI/HDMI Wireless RX | |
Video | |
Video Outputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) 1 x HDMI Type-A receptacle 1 x USB 3.0 micro B receptacle |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) HDMI: RGB 4:4:4, 8-bit |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions | |
Supported Resolution | 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 (via HDMI ports only) 480i(NTSC)/576i(PAL) |
Video Processing | |
Video Compression | visually lossless |
Test Pattern Generator Support | Yes |
Colour Correction | CDL/1024 1D LUT (supports 10-bit colour) 33x33x33 3D LUT (supports 10-bit colour) |
Audio Processing | |
Audio Compression | 48kHz 24-bit PCM |
Physical | |
Dimensions | 89 x 138 x 24mm |
Weight | 376g |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
Mountability | Multiple mounting options with M3 and 3/8" holes |
Interfaces | |
Http | None |
Configuration Interfaces | OLED Screen with Menu Joystick Navigation |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
USB Interface Functionality | Upgrade via Mini-USB |
Network | |
Wireless | Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz EU & JP: 5.19 ~ 5.23 GHz DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz EU & JP: 5.27 ~ 5.67 GHz(20MHz and 40MHz channels) |
Rf Channel Selection | Auto and Configurable Selection |
Encryption | AES-128 |
Rf Power | 17dbm EIRP(with one 2dbi TX antenna) |
Range | Up to 3000ft line of sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power | |
Power Input | 2-Pin Connector 7-28 VDC |
Battery | None |
Nominal Power Consumption | 8.5 Watts (Measured at 1080p60) |
Environmental | |
Operating Temperature | 0 ~ 40 deg-C |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek Bolt 3000 XT SDI/ HDMI Wireless TX/ RX
- Manufacturer: Teradek
- Model: TD-10-1995-NZ
- SKU: TD-10-1995-NZ
- RM Product #: 52214
- Warranty: 1 year manufacturer warranty