Sachtler 3025 Cine 30 Tripod System
Product #40660
SKU ST-3025-NZ
Usually ships in 3 - 4 weeks


Sachtler 3025 Cine 30 Tripod System

Product #40660 | SKU ST-3025-NZ
Usually ships in 3 - 4 weeks

Product Features
  • Snap & Go Side-loading Mechanism
  • 18-Step Counterbalance and 7-Step Drag
  • Payload Range Selector
  • Illuminated Bubble Level
  • Calliper Disk Pan and Tilt Locks
Our Price $21,999.00 AUD


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The Sachtler 3025 Cine 30 Tripod System consists of the 3006 Cine 30 HD 150mm Fluid Head, 6290 Cine 150 Long Tripod, 7023 Cine Ground-Level Spreader, 3372 Heavy-Duty Front Pan Bar, and the 3060 Side-Load Camera Plate.

Any camera assistant will appreciate the Cine 30 HD 150mm fluid head and its unique side-load sliding camera plate. With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. Fully compatible with Arri and OConnor camera plates, it features a fine adjustment for a tight secure fit, even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtler's patented leak-proof frictionless cartridges, which carry a separate five-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and calliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever.

When shooting a project with top-of-the-line production cameras and gear, you need a support system that provides secure and robust stability in all conditions. With the Cine 150 (Long), you get a tripod that is rated at an astonishing 309 lb. It safely supports the payload utilising reliable, time-proven aluminium alloy metallurgy with dual 35mm leg tubes. Oversized rotary stage clamps ensure easy height adjustments while wearing gloves, and the die-cast 150mm receiver accepts most cine/EFP fluid heads. Used in conjunction with the included 7023 Cine ground-level spreader, payload integrity is assured, and delicate floor surfaces are protected.

The 3025 System 30 is covered by the standard Sachtler three-year warranty, as well as comprehensive worldwide voice and web-based tech support, complete with CAD drawings, manuals, and service bulletins.

Key Features

Side-Loading Rapid Camera Mount
Snap & Go side-loading gets heavy camera packages mounted quickly without compromising safety or sliding range, and is also compatible with Arri and OConnor camera plates

18-Step Counterbalance and 7-Step Drag
For rapid setup and repeatable results

Payload Range Selector
Switch between the high and low counterbalance ranges with a flip of the front-mounted Payload Range Selector lever

Calliper Disk Pan and Tilt Locks
Similar to braking systems on trucks or trains, the default position is on, so in case of a system failure, the head will be locked

Illuminated Bubble Level
The Touch Bubble is a self-illuminated spirit level activated through contact, and is powered by three PX625A cells

Optional Assistant's Box Mount
Using the optional Front Box Adapter, an assistant's box may be attached to the front of the head without impairing the tilt range

Optional Eyepiece Extension Support Adapter
Provides an anchor point for eyepiece extension rods on the left side of the head

Heavy-Duty Leg Tubes
Oversized aluminium alloy double leg tubes for absolute support integrity

Rotary Clamps
Extra-large rotary stage clamps for ease of use while wearing gloves

Ground-Level Spreader
Prevents tripod collapse while protecting delicate floor surfaces

General
Load Capacity 35 kg
Maximum Height 77.7" (197.3 cm)
Minimum Height 41.9" (106.4 cm)
Folded Length 49" (124.5 cm)
Levelling Bubble/Illuminated Yes/yes
Weight 16.3 kg
Head
Counter Balance System 18-Step plus boost
Quick Release/Wedge Plate Yes
Balance Plate Yes, with 150 mm of travel
Tilt Drag 7-Step plus zero
Tilt Range -75 to +90°
Tilt Lock Calliper brake
Spring Loaded Counter Balance 7-Step plus zero
Pan Range 360°
Pan Lock Calliper brake
Legs
Material Aluminium alloy
Head Attachment Fitting 150 mm
Leg Stages 1
Leg Sections 2
Leg Lock Type Rotary clamps
Independent Leg Spread Yes
Spiked/Retractable Feet Spiked
Centre Brace Ground-level

In The Box

Sachtler 3025 Cine 30 Tripod System
  • 3006 Cine 30 HD Fluid Head
  • 6290 Cine 150 (Long)
  • 7023 Cine HD Spreader
  • Heavy Duty Front Pan Bar
  • Sideload Plate
  • Limited 1-Year Warranty, Extendable to 2-Years with Product Registration

Reviews

Own or use this product?
Give it a rating

In The Box

Sachtler 3025 Cine 30 Tripod System
  • 3006 Cine 30 HD Fluid Head
  • 6290 Cine 150 (Long)
  • 7023 Cine HD Spreader
  • Heavy Duty Front Pan Bar
  • Sideload Plate
  • Limited 1-Year Warranty, Extendable to 2-Years with Product Registration

Reviews

Own or use this product?
Give it a rating
Product:
Sachtler 3025 Cine 30 Tripod System
Manufacturer:
Sachtler
Model:
ST-3025-NZ
SKU:
ST-3025-NZ
RM Product #:
40660
Head Type:
Fluid
Load Capacity:
35.0 kg
Material:
Aluminium
Closed Length:
124 cm
Weight:
16.30 kg
Maximum Height:
197.3 cm
Minimum Height:
106.4 cm