Wooden Camera C-Box 3G-SDI and HDMI Converter (V-Mount)

Description

C-Box (Converter, V-Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male V-Mount plate attached and passes power through to the camera via the female V-Mount plate on the other side. The male V-Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc.

This version attaches between any V-Mount plate and V-Mount battery. For example, the C-Box (HD-SDI, V-Mount) can fit between the Blueshape BV090 Battery and the WC V-Mount (Epic/Scarlet). Another example would be attaching it between the Blueshape BV090 Battery and the WC Gold Mount (BMC).

Overview:

• Power input via V-Mount battery, 12-24 VDC .5A
• Attaches between standard V-Mount battery and camera V-Mount plate
• LED indicator for Signal and Power on operator side
• 5V mini USB output for accessory power
• 1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessories
• Re-clocks standard SD, HD and 3G SDI data rates
• Auto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/s
• Passes SDI embedded audio and ancillary data
• Operating Temperature 0 to +40 C
• Operating Humidity 0 to 90% Non-Condensing

Signal Information

• Data Types: SMPTE 259/292/424
• Data Rates: 19 Mbit/s through 3.0 Gbit/s
• Re-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/s
• Input/Output Return Loss: > 15dB @ HD, > 12dB @ 3G
• Input Level: 800 mV P-P +/- 20%
• Input Impedance: 75 Ohms +/- 1%
• Output Level: 800 mV P-P +/- 5%
• Output Impedance: 75 Ohms +/- 1%
• Output Jitter: < 0.2 UI