dB Technologies DVA MS12 Active Bass Reflex Flyable Subwoofer
- Product: #50566
- SKU: DVAMS12
The DVA MS12 from dB Technologies is especially designed to fit perfectly with an M2M and M2S array, the MS12 active sub is equipped with a single 12" woofer in a bass reflex enclosure, acting as a perfect low-end extension module for DVA Mini systems.
This subwoofer delivers an incredible SPL considering its very compact dimensions, and it can be easily used both flown and ground stacked.
The smart design of the feet allows the user to avoid the dull removal of the flying brackets: it is possible to remove the feet in few seconds and screw them again upside-down. In this way any contact between the flying brackets and the ground is avoided, as only the rubber feet will touch it. A practical X-over out can be used to feed signal straight to the line arrays modules, simplifying considerably the signal and power cabling.
DVA MS12 comes with the new generation of exclusive digital amplifiers Digipro G3, engineered by dBTechnologies and distinguished by an exceptionally lightweight design and a very remarkable efficiency.
An integrated USB B-type port on the DVA MS12 amplifier allows the user to access the complete telemetry of the sub, monitoring the status of the speaker, including total playing hours, temperatures and performances reports.
- Active Bass Reflex Subwoofer
- Integrated Hardware With Innovative Quick-Lock Mechanics
- 700w RMS Digipro® G3 Class-D Amplifier
- Switched Mode Power Supply With Auto-Range
- Digital Controller On Board
- Dual Function Feet
|Speaker Type||Active bass reflex flyable subwoofer|
|Frequency Response [-6dB]||45 - 140 Hz|
|Frequency Response [-10dB]||40 - 165 Hz|
|Max SPL||131 dB|
|Voice Coil LF||3"|
|Amp Technology||Digipro® G3|
|Amp Class||Class D|
|Power Supply||700W SMPS with PSU Auto-range (110V~ and 220V~)|
|LF Amp||700 W RMS (1400 W Peak)|
|Controller||DSP 56 bit|
|AD/DA Converter||24 bit/48 kHz|
|Controls||X-Over frequency selection, Phase selection (0° or 180°), Outputs mode selection (Link/X-over), Mini-USB type “B” port (service data)|
|Limiter||Dual active, RMS/Peak, Thermal|
|Crossover Frequency LF-HF||90 - 120 Hz|
|LF X-over out slope||24 dB/Octave|
|Housing||Multiplex plywood - Polyurea painting|
|Handles||1 x left side, 1 x right side|
|Feet||4x Dual Position Reversable Feet (flying/stacking mode)|
|Fittings||M20 screw for pole mount on top side, integrated hardware with fast lock mechanics|
|Width||460 mm (18.1 in)|
|Height||430 mm (16.9 in)|
|Depth||385 mm (15.2 in)|
|Weight||26.5 kg (58.4 lbs)|
Australian Shipping Via DHL
DHL offers a great express shipping service to Australia from New Zealand. We are proud to be able to offer express shipping to main cities on the east coast of Australia, within the same timeframe ( If not quicker ) than local Australian courier companies. Prior to the Covid-19 outbreak, service standards for these main centers was overnight. However these services have been impacted greatly, and as such the overnight service has been suspended. Overnight shipping will likely resume once things have returned to normal.
Qualifying main centers include:
Whilst this service is extremely efficient and will likely be delivered within 1-2 days 99.9% of the time, it cannot be guaranteed. In the case where something were to go wrong with your delivery and it doesn’t arrive within the specified time frame, in most cases it will be delivered by the next day.
While not all major cities are eligible for overnight delivery, they still benefit from this great service. Other centers throughout Australia will have a typical delivery ETA of 2-4 days. (Excluding rural delivery address where this ETA can be extended to an additional three or more days).
If you require urgent shipping and you don’t reside in one of the cities stated above, please contact us and we can find a solution that works best for you.
Please Note: Shipping via DHL is not available to PO boxes and/ or parcel boxes etc.