sE Electronics X1 S Studio Bundle
Features
- X1 S Microphone
- RF-X Reflexion Filter®
- sE Electronics Isolation Pack
Description
The sE Electronics X1 S Studio Bundle has everything from the Vocal Pack, plus our simple and effective RF-X so you can record anywhere you want.
Key Features:
The RF-X
- If you're recording in a non-acoustically-treated space (bedrooms, closets, etc.), a Reflexion Filter® helps keep your signal clean without the sound of your room around it.
- Using the same design technology as the industry standard Reflexion Filter® PRO, the RF-X was conceived to answer the needs of the discerning recording artist working on a budget. With its lightweight vented body and an efficient, redesigned clamp assembly, the RF-X is simplicity itself, providing stellar performance and ease-of-use.
- New materials have been developed to make the RF-X lighter than its predecessors but also to maintain its durability – helping to position the RF-X as a versatile product suited for any challenging working environment. It features a four-layer acoustic filter design comprised of the outer vented composite panel, a wool fabric layer, an air gap layer and an inner acoustic foam layer.
- This multi-layer design differentiates the RF-X from its competitors by filtering frequencies evenly across the whole spectrum, helping to ensuring that recordings exhibit almost zero sound coloration when using the filter.
The Isolation Pack
- The Isolation Pack is a great add-on for anyone looking to increase the versatility of their X1 Series or sE2200 Series mic.
- The integrated quick-release mechanism at the base of the shock mount makes it easy to insert or remove a mic. No screws, no hassle, just one twist to secure or release.
- Made from metal (rather than delicate fabric), the pop filter can be vertically positioned to accommodate any of the above mics, or completely removed from the shock mount if desired.
The X1 S
The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilises a gold-plated XLR 3-pin jack and requires 48V phantom power.
The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimises distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.
- The X1 S utilises a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience
- Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise
- The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques
- Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques
- The X1 S's all-metal chassis provides efficient rejection of electrical interference and noise
- A gold-plated XLR connector ensures loss-free, reliable signal connection
Specifications
Microphone | |
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Capsule | Condenser |
Diaphragm | 1" / 25.40 mm |
Circuitry | Solid-State |
Pad | -10 dB-20 dB |
Performance | |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 140 dB SPL |
Impedance | 125 Ohms |
Load Impedance | 1 Kilohms |
Sensitivity | 30 mV/Pa |
Signal-to-Noise Ratio | 85 dB |
Equivalent Noise Level | 9 dB A-Weighted |
Power | |
Operating Current Consumption | 6 mA |
Physical | |
Weight | 15.7 oz / 445 g |
SE Electronics RF-X Reflexion Filter X (Gray) Specs | |
Filter Type | Reflection Filter |
Attachment Style | Female Thread |
Filter Material | Foam, Wool |
Dimensions | 14.7 x 7.9 x 12.0" / 37.3 x 20.1 x 30.5 cm |
In The Box
- X1 S Microphone
- RF-X Reflexion Filter®
- sE Electronics Isolation Pack
- 3m Mic Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: sE Electronics X1 S Studio Bundle
- Manufacturer: SE Electronics
- Model: SE_X1SPACKAGE
- SKU: SE_X1SPACKAGE
- RM Product #: 87875