Light Stands & Mounting

• Aluminium & Steel
• Four V-Shaped Jaws
• Handle With Roller Bearings
• Non-Slip Aluminium Friction Disc

• Industry standard Junior base of 28mm
• 94cm Folded Length
• 227cm Extended Length
• 4kg Weight
• 10kg Load Capacity

• Load Capacity: 5kg
• Folded Length: 89cm
• Weight: 1.3kg
• Air-Cushioned
• 5/8" Stud

• Mini Articulating Arm
• Secure Mounting to Vehicles
• Compatible with GoPro Hero 11, DJI Action 3, Insta360 X3
• Design Based on 1/4"-20 Mounting Points
• Aluminium Alloy, Rubber, and Stainless Steel Construction

• 5.0" Long
• Steel Construction

• For Holding Bead Board, Foamcore, Etc.
• Clamps Onto Flat Surfaces Like Tabletops
• 5/8" Baby Pin
• Adjustable Vice Grip
• Also Known as Platypus Clamp

• Wedge insert for Super Clamp
• Increases gripping strength and stability on flat surfaces
• Made of technopolymer

• Supports 5/8" and 3/8" Accessories
• Holds Large Overhead Frames
• Two Rotating Discs with V-Shaped Jaws

• Load Capacity: 29.9 kg
• Weighs 0.49 kg
• 6.6 cm Jaw Opening

• Levelling Leg.
• Removable Column Can Be Used as Boom.
• Load Capacity: 1.5kg.
• Maximum Height: 198cm.
• Minimum Height: 50cm.

• Converts 1/4"-20 Stud to 5/8" Baby Stud

• Two-Piece Telescoping Design
• 17.1 to 29.3" Adjustable Length
• T-Bar Locking Screw
• 5/8" Male Threaded Connector
• 5/8" Threaded Hole for Mic Stand
• Steel Construction with Plastic Handgrip

• Holds up to 6 C-Stands
• Attaches to Wall or Truck Door
• Hoops for Bungee Cord
• Steel Construction

• Double-Sided Stud
• Fits into Any 5/8" Receiver

• Turns Female 1/4"-20 to Male 1/4"-20

• Extremely versatile camera support
• Perfect to be used in conjunction with the Super Clamp system
• Camera platform supplied with a 1/4-20'' screw
• Max payload 0.5 kg
• Height 14.5 cm

• Fits 1’’ x 1’’ Stand legs
• Made of sturdy steel components
• Brakes included (soft braking system)
• Wheels can be locked
• Wheels made of non-marking material
• Come in a set of 3

• Adds Stability

• Stand Load Capacity: 25kg
• Extension Arm Load Capacity: 5kg
• Working Height Range: 1.5 to 3.2m
• 2-Section Steel Tubes, Chrome Finish
• Turtle Base with Accessory Caster Set
• 49.2" Boom Arm with Two Grip Heads

• For Mounting Pavotube 15C and 30C

• Used for mounting lighting equipment
• 2 Spring loaded legs to open in fixed positions
• Third leg is height adjustable
• Five times stronger than aluminium

• Replaces #3367
• Reducing bushing

• For Stands with 22mm Leg Diameter
• Three casters

• Black anodised aluminium
• No swivel mount or counterweight

• 3 Risers, 4 Sections
• Maximum Height: 1.3m
• Closed Length: 42cm
• Ergonomic Mould-Injected Adjustment Knobs

• Requires Mini Clamp
• Extends 12 cm
• 1/4"-20 and a 3/8" screw thread

• Supports 2.5kg
• Folds to Only 48cm
• 5/8" Stud with Male 3/8"-16 Threads

• Baby Pin on One End, Hex Pin on Other
• For Convi & Super Viser Clamp Systems
• Steel Construction

• Load Capacity: 2 kg
• Mounts Gear with 1/4" or 3/8" Threads
• Small, versatile clamp

• Load Capacity 4kg
• 1/4"-20 & 3/8"-16 Female Threads
• Clamping Range of 1.3cm - 3.5cm

• Braided Stainless Steel

• Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
• Includsing set of 4 screws with washer, safety disc and wing nuts

• Supports up to 4.4 lb, Wide Tilt Range.
• Ideal for Speedlites & Small LED Lights.
• Knurled Tightening Ring, 5/8" Receiver.
• Attaches to Anything with 5/8" Stud.
• Spring-Loaded System.

• Can Be Mounted on Cage or Handle
• Equipment Doesn't Rotate after Mounting
• Quick Locking Thumbscrew, CNC Aluminium
• Part of Super Knuckle System

• Double ended stud
• 1.6 cm diameter stud
• Extend an existing threaded stud

• Compatible with Super Clamps
• Steel
• Reliable
• 5 cm in height

• Aluminium Construction

• Brass Construction

• Mounts to a Convi or Super Viser Clamp
• Brass Construction

• Sliding "Lazy Leg"
• Load Capacity: 10kg
• Maximum Height: 2m
• Minimum Height: 91cm
• 3 x Risers
• 5/8" Stud

• 1-1/8" Receiver
• Accepts C-Stand Riser
• Braked Casters

• Lightweight, strong & compact professional lighting stand
• Detachable column for two-in-one use
• Additional stability with hook for sandbag and levelling leg
• 16mm male top stud with 3/8” or 1/4” thread attachments
• Strong construction supports payloads of up to 1.5 kg

• Aluminium Construction

• Boom, Swivel Adapter, Counterweight
• Three sections
• Extends to 2.1 m

• 2 Section Legs
• Aluminum Locking Collars
• Double Braced Leg Base
• Universal Mount

• Load Capacity: 1.9 kg
• Equipped with Cheese Block
• Multiple 1/4"-20 & 3/8"-16 Taps
• 2 x 3/8" Rod Clamps

• Protective Pads in Jaws for Better Grip
• Accepts Snap-In & Standard Baby Pins
• Strengthened to Withstand Great Clamping Pressure

• Converts 3/8"-16 female to 1/4"-20 male

• For Microphones and Other Audio Equipment
• Allows to Attach to Photo Standard Female Threads

• Double Riser
• Maximum Height: 3m
• 5/8" Stud
• Accepts Turtle Base

• Load Capacity: 10kg
• Max Height: 1.73m
• Min Height: 93cm
• 3 Sections
• Two Spring-Loaded Legs
• Zinc Alloy Base

• Professional, compact standard mini clamp
• Designed from hard wearing aluminium alloy
• Versatile enough for studio or location work
• Comes with a standard 16 mm socket
• Can clamp on tubes up to 35 mm

• Revolving 3/8" and 5/8" Receptacle
• Accepts Optional Pass-Through Rods

• Replaces #3101
• Converts to a 5/8" female socket

• Quick Set Up
• Sliding Arm Supports
• Multiple Fixture Support
• Removable Base

• Steel Base
• 5 kg Load Capacity
• Sets up easily
• Boom telescopes from 1.1 to 2.1 m

• Replaces #2970
• Lightweight
• Adjustable jaws

• Quick lock mechanism
• Three adjustable sections
• Support loads up to 5 kg
• Extends to 86.4 cm

• Steel and Aluminium Construction
• 30kg Load Capacity
• Hex Receiver and 5/8" Knurled Pin

• Pivoting clamps
• For super/heavy duty booms
• Use with 35 mm diameter boom shafts

• 5/8" Receiver
• VESA 3x3" TV Mounting Plate
• Ratcheting Handles
• Supports Monitors Weighing up to 8kg

• Mounts to C-Stand Riser Sections
• 5/8" Male Pin & 5/8" Female Receiver

• Cold Shoe Mount, Centre Ball Head
• Rubber Grips Prevent Scratches, 5/8" Pin
• Load Capacity: 2kg, 5/8" Receiver
• Ball Head Offers Precise Positioning

• Replaces # 3390, 3090
• This stand and boom are black painted aluminium
• Double leg bracing

• Double articulated arms, to support loads up to 5 kg
• Very lightweight, weighs 0.5 kg
• Two sections articulated arm, max length 62.5 cm
• Sliding extension allow for flexible positioning.

• Extends height of heavy duty cine stand
• locking reversible Baby (5/8") stud
• Junior (1-1/8") female top receptor
• Mounts to Cine Stand's Junior (1-1/8") female top receptor

• 50 mm long
• 3/8'' on the lower end
• 5/8'' stud at the top
• 5 cm in height

• For Support or Lighting Systems
• Compatible with Most Common Thread Sizes
• Metal Construction

• Accepts 190 & 055 Series Columns
• Replaces #3424

• Two 5/8" Hex Studs
• 3/8"-16 and 1/4"-20 Female Threads
• Works with Convi or Super Clamps

• Aluminium Construction
• 3/8" Rods and Thread

• Tilt-top head alone, without camera bracket
• Perfect to be used with the Super Clamp system
• 16 mm socket on both ends

• Extends height of your light
• Aluminium construction
• Three sections

• Fits Most 22 mm Diameter Tubular Legs
• Eases positioning of light stands

• Mounts to any 3/8"-16 male thread
• 3/8" Female Thread, 5/8" Receiver
• Enables 1-hand operation

• Load Capacity: 6.0 kg
• 5/8" Pin with 3/8" Female Thread
• 3/8"-16 Male Thread

• 5/8" Stand Adapter
• Made of zinc steel
• Adapter length is 9.9 cm

• 150 mm Diameter
• Takes Standard "Baby" Accessories
• 2 kg Load Capacity

• Rubber Material with Silicon
• Mounts to Smooth, Non-Porous Surfaces
• Use from 10.4 to 120 Degrees Fahrenheit

• 5/8" Mount
• Includes 5/8" Stud
• Separate Base and Pole

• Load Capacity: 20 kg
• Clamping Range: 0 to 1.96"
• Tightening Knob
• 5/8" Baby Pin Stud
• 3/8"-16 (M10) Female Connection

• Lightweight, Portable & Durable
• Rapid Deployment
• Tiny Footprint
• Multi-Purpose Support Solution
• Rapid Deployment
• Aquadrop Additional Support

• Friction Lock Disc
• Load Capacity: 35 kg
• 5/8" Pin and Receiver
• Works Well with Optional VESA Mounts

• 50kg Suction Cups
• Secure & Accommodate Heavier Rigs
• For Speed Rail Car Mounting Kit or any 50mm Speed Rail
• Adjustable Clamps
• Durable Aluminium, Stainless Steel & Rubber Construction

• Set of 2 U-hooks
• Ideal for cross poles when used to support background paper
• Suitable for the Super Clamp

• Stand with Casters, Boom, Counterweight
• Double leg bracing
• Fitted with a universal mount

• Telescoping pole design
• 3/8”-16 male thread
• 3/8”-16 female threaded clamp
• 5/8” pin allows you to mount lights

• 5kg Load Capacity

• Set of 3 casters
• Diameter of 19 mm
• Compatible with select stands

• Designed to Hold Green Screen or Lights
• Adjustable from 76.2 to 228.6cm
• 1/4"-20 Screw Stud
• Green Screen Clamp Included
• Zippered Carrying Bag Included

• Load Capacity: 20kg
• Jaws Open from 0 to 5cm
• Mount Accepts 35mm Tubes

• 1-Set of 29.5" Long Rods
• 3/8"-16 Threads on Both Ends of the Rod
• Includes One Rod Connector
• Used for Rigging Lights and Cameras
• Used with a Variety of Other Accessories
• Manufactured from Aluminium

• Full metal design: stainless steel and diecast aluminium alloy
• For fixing to round and rectangular pipes as well as flat objects
• Clamping range: 13 - 55 mm
• 5/8" (16 mm) hexagonal or round pin holder

• Shotgun-style video microphone and accessories pack
• For phones, tablets, and DSLRs
• Compatible with virtually all audio and video apps

• Holds up to 2 C-Stands (127 cm)
• 1000-Denier Cordura Nylon Construction
• Soft Nylon Loop for Two-Handed Lifting
• Wider End to Fit C-Stand Folded Bases
• Soft Suede Leather Handles

• 1-Set of 39" Long Rods
• 3/8"-16 Threads on Both Ends of the Rod
• Includes One Rod Connector
• Used for Rigging Lights and Cameras
• Used with a Variety of Other Accessories
• Manufactured from Aluminium

• Unique Aluminum Collar
• Load capacity: 30kg
• Min Height: 132cm
• Max Height: 377cm
• Footprint: 91.5cm
• Damped springs risers

• Ratcheting Handle for Repositioning
• 3 x 1/4"-20 Holes, Aluminium Construction
• Jaws Grip Items 1.3 to 5.3cm Thick
• Wedge for Flat Items, Ratcheting Handle

• Multipurpose Applications
• For Studio or On-Location Use
• Made of 9-Ply Baltic Birch Wood

• Works with Convi Clamp Accessory
• Special Groove Keeps Jaws Aligned
• Die-Cast Aluminium Construction
• Knurled Neck for Maximum Friction

• Multipurpose Applications
• For Studio or On-Location Use
• Made of 9-Ply Baltic Birch Wood

• Load Capacity: 10kg
• Maximum Height: 171.9cm
• Minimum Height: 92.4cm
• Removable Base
• 3 Sections
• 5/8" Junior Stud

• C-Stand with Junior to Baby Adapter
• Load Capacity: 10kg
• Maximum Height: 1.72m
• Minimum Height: 92m
• 3 Sections
• 5/8" Stud

• Allows Pan & Tilt of Light Hung Overhead.

• 5/8" Female.
• Includes T-Handle.

• Quick set up
• Locking collars
• Universal mount
• Double braced leg base

• Steel Construction
• Dual mounting options
• Small footprint

• Aluminium Alloy Construction.
• 11.5 x 8" Tray.
• Integrated LAJO-4 Bracket.
• 7" Arm with Dual 5/8" Stud.

• Stand Load Capacity: 25kg
• Extension Arm Load Capacity: 5kg
• Working Height Range: 1.5 to 3.2m
• 2-Section Steel Tubes, Chrome Finish
• Turtle Base with Accessory Caster Set
• 49.2" Boom Arm with Two Grip Heads

• 1.4m Maximum Length, Ergonomic Handle
• 55cm Minimum Length
• C-clamp at One End
• Accessory Clamp at the Other End

• Holds Four LED Light Panels
• Maximises Light Output

• Holds Two LED Light Panels
• Maximises Light Output

• 3 locking set screws
• Made from lightweight aluminium

Connect multiple pieces of 9.Solutions 5/8" Rod

Medium-sized sandbag Max payload of 10kg when filled Made of resilient black nylon Does not include sand Turn light stands into boom stands

• Strong stainless steel boom arm
• 1/4" and 3/8” threaded holes
• Ergonomic large rotating knob
• Adjustable height: 150-330cm
• Compact telescoping tubes

• Use with the Full Camera Cage for GH6
• Holds HDMI Cables Firmly in Place
• Reduces Long-Term Damage to HDMI Port
• Protects Against Loss of Video Feed

• For Tilta Sony a1 Full Camera Cage
• Prevents Accidental Cable Disconnects
• Secures HDMI Cable
• Aluminium Alloy & Stainless Steel

• For Tilta Sony a7 IV Full Camera Cage
• Prevents Accidental Cable Disconnects
• Secures HDMI Cable
• Aluminium Alloy & Stainless Steel