Light Stands & Mounting

Aputure LiteBase 200S

  • Low weight
  • 1/4" thread
  • Operating height from 80 - 190cm
  • Rubber feet
In stock Ships today
You Pay: $33.95
- +
(1) review

Aputure LiteBase "200m" 2.8m Light stand

  • Low weight
  • Spring dampers
  • Standard thread
  • Operating height from 115 - 260cm
In stock Ships today
You Pay: $47.95
- +

Kupo KCP-600 Super Viser Clamp with Hex Receiver (10.2cm, End Jaw)

Steel and Aluminum Construction, 30kg Load Capacity
In stock Ships today
You Pay: $89.95
- +

Kupo 070AC Mini Click Stand (2.1m)

Load Capacity: 4kg, Folded Length: 71cm, Weight: 1.1kg
In stock Ships today
You Pay: $149.00
- +

Kupo 155M High Baby Stand (420cm)

Maximum Load: 25 kg, Levelling Leg, Steel Construction, 5/8" Mount
In stock Ships today
You Pay: $449.00
- +

9.SOLUTIONS Double Joint Arm (Short, 360mm)

2x 5/8" Pins with 3/8"-16 Female Thread, Load Capacity: 30.8 lb
In stock Ships today
You Pay: $159.00
- +

9.SOLUTIONS Python Double Clamp

  • Load Capacity: 20 kg
  • Jaws Open from 0 to 50 mm
  • Two clamps
  • Dual contoured jaws
In stock Ships today
You Pay: $94.95
- +

Litepanels Kit Light Stand (8.5')

Aluminum Construction, 4 Sections, Min Height: 28.7"
In stock Ships today
You Pay: $129.00
- +

Manfrotto 014-14 Rapid Adapter

Allows mounting of equipment with a 1/4 inch threaded receptor.
In stock Ships today
You Pay: $26.95
- +

9.SOLUTIONS Baby Pins

Increase mounting utility to anything with a 3/8" thread
In stock Ships today
You Pay: $40.95
- +

9.SOLUTIONS Savior Clamp Mini

  • Load Capacity: 30 kg
  • Weighs 135 g
  • 30 mm Jaw Opening
In stock Ships today
You Pay: $64.95
- +

Orca OR-81B Water Bladder Pocket

  • Contain up to 6L
  • Use with the OR-81 water / sand bag
In stock Ships today
You Pay: $11.95
- +

9.SOLUTIONS Savior Spring Clamp Mini

  • Jaws Have Multiple Contact Points
  • 2 x 1/4"-20 and 2 x 3/8"-16 Sockets
  • Clamping Range: 0 to 45 mm
In stock Ships today
You Pay: $46.95
- +

Manfrotto 035 Super Clamp without Stud

  • Lightweight cast alloy
  • Holds just about anything
  • Mount on any tube 13 - 55 mm
  • Jaw Opening of 1.3 - 5.3  cm
  • Stud not included
In stock Ships today
You Pay: $47.95
- +

Manfrotto 396B-2 Double Articulated Arm - 2 Sections With Camera Bracket

  • Double articulated arms, to support loads up to 5 kg
  • Very lightweight, weighs 0.64 kg
  • Two sections articulated arm, max length 62.5 cm
  • Sliding extension allow for flexible positioning.
  • Supplied with camera bracket
In stock Ships today
$189.00
You Pay: $165.00
- +

9.SOLUTIONS Python Clamp

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships today
You Pay: $48.95
- +

9.SOLUTIONS 5/8" Rod Set (500mm)

1-Set of 500mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock Ships today
You Pay: $65.95
- +

9.SOLUTIONS 3/8" Rod Set (150mm)

  • Aluminium Construction
  • 3/8" Rods and Thread
In stock Ships today
You Pay: $18.95
- +

9.SOLUTIONS EX-SUS Extension Suspension Pole

Load Capacity: 20kg, Telescoping Design: 110-198 cm
In stock Ships today
You Pay: $229.00
- +

9.SOLUTIONS Python Clamp Mini

  • Load Capacity: 5 kg
  • Jaws Open from 8 - 35 mm
  • Position anywhere
In stock Ships today
You Pay: $46.95
- +

9.SOLUTIONS Python Clamp with Grip Joint

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • Grip Joint with 3/8" & 5/8" Receptacles
  • 3/8"-16 (M10) Connection
In stock Ships today
You Pay: $73.95
- +

9.SOLUTIONS 5/8" Open Gag

Joins Two 5/8" Rods,, Allows 360° Positioning
In stock Ships today
You Pay: $74.95
- +

Manfrotto 026 Swivel Adapter

An adapter with the ability to rotate - supports up to 2.5kg
In stock Ships today
You Pay: $55.95
- +

9.SOLUTIONS Python Clamp with Snap-In Socket

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Receiver
  • 3/8"-16 (M10) Connection
In stock Ships today
You Pay: $86.95
- +

9.SOLUTIONS Python Clamp with 3/8" Male Thread

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships today
You Pay: $62.95
- +

9.SOLUTIONS 5/8" Rod Set (150mm)

  • 1-Set of 5.9" Long Rods
  • 3/8"-16 Threads on Both Ends of the Rod
  • Includes One Rod Connector
  • Used for Rigging Lights and Cameras
  • Used with a Variety of Other Accessories
In stock Ships today
You Pay: $38.95
- +

Kupo KCP-641B Photo Baby Boom (Black)

Supports 3kg, Sand Bag Hook, Lightweight Aluminum, 5/8" End Stud
In stock Ships today
You Pay: $189.00
- +

Manfrotto 013 Adapter Spigot

A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock Ships today
You Pay: $17.95
- +

Manfrotto 1051BAC Air Cushioned Compact Stand

Lightweight stackable stand with 3 risers - max height 211cm
In stock Ships today
You Pay: $159.00
- +

Manfrotto 1004BAC Air Cushioned Master Stand

  • Folds Flat, Stacks
  • Three Risers
  • Double-Braced Leg Base
  • Aluminium Locking Collars
In stock Ships today
You Pay: $209.00
- +

Kupo 033 Low Mini Kit Stand (18.5"/47.31cm)

5/8" Stud, Supports 1.5kg, Weighs Only 0.77kg
In stock Ships today
You Pay: $94.95
- +

9.SOLUTIONS El-Bo Arm

Load Capacity: 33 lb, 5/8" Pin with 3/8" Female Thread
In stock Ships today
You Pay: $159.00
- +

9.SOLUTIONS 3/8" Gag

  • Revolving 3/8" and 5/8" Receptacle
  • Accepts Optional Pass-Through Rods
In stock Ships today
You Pay: $46.95
- +

Impact Light Stand, Black - 6' (1.8m)

One of the most economical light stands available
In stock Ships today
You Pay: $66.95
- +

Manfrotto 015 Adapter

Reduces a 3/8 inch threaded screw to a standard 1/4 inch tip.
In stock Ships today
You Pay: $9.95
- +

9.SOLUTIONS Mini Rigging Rod Set Nuts

  • 2x Long Nuts
  • 6x Finger Nuts
  • 3/8" Thread
In stock Ships today
You Pay: $28.95
- +

9.SOLUTIONS Double El-Bo Arm

  • Load Capacity: 6.0 kg
  • 5/8" Pin with 3/8" Female Thread
  • 3/8"-16 Male Thread
In stock Ships today
You Pay: $289.00
- +

Manfrotto 5001B Nano Stand Black

  • 5 Sections, 4 Risers
  • Lightweight Aluminium
  • Compact When Folded
In stock Ships today
You Pay: $109.00
- +

9.SOLUTIONS Python Clamp with 5/8" Pin

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Pin
  • 3/8"-16 (M10) Connection
In stock Ships today
You Pay: $63.95
- +

9.SOLUTIONS 5/8" Dual Knob Gag

Individual Clamping on Both Sides of Gag
In stock Ships today
You Pay: $94.95
- +

K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread

For Microphone Mounts and Stands
In stock Ships today
You Pay: $8.95
- +

9.SOLUTIONS Snap-in Socket

  • Mounts to any 3/8"-16 male thread
  • 3/8" Female Thread, 5/8" Receiver
  • Enables 1-hand operation
In stock Ships today
You Pay: $37.95
- +

9.SOLUTIONS 5/8" Rod Connectors (Set of 6)

Available to order today
In stock Ships today
You Pay: $87.95
- +

9.SOLUTIONS Grip Joint

  • Revolving 3/8" and 5/8" Receptacle
  • Accepts Optional Pass-Through Rods
In stock Ships today
You Pay: $45.95
- +

Tether Tools Rock Solid 22" Telescoping Arm

  • Aluminium Construction
  • 34.6 to 55.8 cm extension
  • 3/8" Baby (5/8") Studs at Each End
In stock Ships today
You Pay: $35.95
- +

9.SOLUTIONS Quick Mount Gooseneck

Magnetic Grip, Flexible Arm, Length: 25cm, Instant Thread Alignment
In stock Ships today
You Pay: $55.95
- +

9.SOLUTIONS 5/8" Rod Set (1000mm)

1-Set of 1000mm Long Rods, 3/8"-16 Threads on Both Ends of the Rod
In stock Ships today
You Pay: $99.95
- +

9.SOLUTIONS 3/8" Rod Set (500mm)

Aluminum Construction, 3/8" Rods and Thread
In stock Ships today
You Pay: $34.95
- +

Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads

Features both 1/4"-20 and 3/8" male thread sizes
In stock Ships today
You Pay: $20.95
- +

Manfrotto 1005BAC Ranker Stand

Air cushioned aluminum stand with Quick Stack System -max height 270cm
In stock Ships today
You Pay: $209.00
- +

1 2 3 4 5 Next >