Marshall

• Compact POV Camera
• 1/2.8" Sony CMOS Sensor
• 85° Horizontal Field of View
• Up to 1080p60 via 3G-SDI
• IR Mode for Low-Light Environments

• IP67 Rated, 1/2.8" CMOS Sensor
• Up to 1080p60 Video Output
• Full-Sized 3G/HD-SDI Output Port
• Includes 4mm Lens with 85° FOV
• 10' Breakout Cable
• Integrated OSD Joystick

• Compact POV Camera
• 1/2.8" Sony CMOS Sensor
• IP67 Rated
• 4.0mm Lens with 85° Horizontal FoV
• Interchangeable M12 Lens System
• Up to 1080p60 via 3G-SDI

• 1 x 3G/HD/SD-SDI Input, 4 x Outputs
• Supports up to 2K30 Video
• Auto Input Detection, Reclocked Outputs
• 270 Mb/s, 1.485 & 2.97 Gb/s Data Rates
• Bicolour LED Status Indicators

• For CV503, 504, 506, 508, 344, 346, 348
• 12-Pin Male Hirose Connector
• 12V, 2.1mm Centre Contact Barrel Jack
• TRS Mic and Line-Level Input
• RS-485 Input
• Attached 4-Direction OSD Menu Controller

60cm in length Can be used as replacement or spare

• M12 Lens Mount
• 4.0mm Lens, f/1.8 Aperture
• Suitable for 8MP Capture
• IR-Cut Coating on Rear Element

• M12 Lens Mount
• 8.0mm Lens, f/1.8 Aperture
• Suitable for 8MP Capture
• IR-Cut Coating on Rear Element

• Compatible with Select Marshall Cameras

• Wide 85° FOV on 1/2.7" Sensor
• For CV225, 502, 503, 505 & 565 Cameras

• M12 Lens Mount.
• Maintains Camera's IP67 Rating.
• 2.8mm Lens.
• f/2.0 Aperture.
• IR-Cut Coating on Rear Element.

• 1/2.8" 2.2MP Sony Exmor Sensor
• M12 Lens Mount, 3.6mm Lens Included
• Capture up to 1080p60 Video
• 3G/HD-SDI & HDMI Outputs
• Genlock Sync/RS485/Audio Hirose Port

• For Marshall CV502, CV505, CV565 Cameras
• For Marshall CV225, V-1292 Cameras
• 3MP Resolution M12 Lens Mount
• Works with HD Board Level Cameras
• Fixed Focus and Iris
• Focus from Near Contact to Infinity

• 1/2.8" 2.1MP CMOS Sensor
• 1920 x 1080 Resolution
• 60/50/30/29.97/25/24/23.98 fps
• Simultaneous 3G/HD-SDI & HDMI Outputs
• Built-In 4.7 to 47mm 10x Optical Zoom

• M12 Lens Mount
• 12mm Lens, f/1.8 Aperture
• Suitable for 8MP Capture
• IR-Cut Coating on Rear Element

• Compatible with 3MP Cameras.
• M12 Mount.
• Compatible with 1/2.7" Sensors.
• 2.8-12mm Focal Length.
• 109-31.2° Horizontal Field of View.

• Up to 1080p60 Resolution
• 1/2.8" CMOS Sensor
• 3G-SDI & HDMI Video Output
• Genlock Tri-Level Sync
• Low Latency

• 1/2.8" 2.5MP CMOS Sensor
• Accepts C/CS Mount Lenses
• Progressive & Interlaced Frame Rates
• 3G/HD-SDI & HDMI Outputs
• Digital NR, AWB, Digital Zoom
• Motion Detection, Privacy Mask

• Capture up to DCI 4K30 Resolution Video
• Simultaneous 6G/3G/HD-SDI & HDMI Output
• CS/C Mount & 4-Pin Auto Iris Connector
• Breakout Cable with RS-485, Audio & More
• Remote Adjust & Match Control

• Mounting Bracket for CV-RCP-V2
• Rackmount on CCU Control Board
• Mount on Broadcast Truck Racks
• Top-Mounts the Unit

• 3 MP Resolution M12 Lens Mount
• Works with HD Board Level Cameras
• For Select POV and Lipstick Cameras
• Fixed Focus and Iris
• Focus from Near Contact to Infinity

• IP68 weatherproof dust-tight compliance housing
• IK10 vandal-proof compliance enclosure
• Die cast aluminium body, mounting arm
• Built-in heater, fan, and attachable sun-hood
• Suitable for compact cameras

• Wide 126° FOV on 1/3" Sensor.
• For CV225, CV502, CV505, CV565 Cameras.

• Capture up to UHD 4K60 Resolution
• 1/2.8" 8.5MP CMOS Sensor
• C/CS Lens Mount
• NDI|HX3, SRT, HDMI Video Output
• VISCA-over-IP, NDI, RCP Control
• Power via PoE or Power Supply

• 64x64 Dante Module
• 10" LCD Intuitive Touchscreen Panel

• Pan, Tilt, Zoom, and Focus
• Adjustment Controls Keypad
• For CV605, CV610, CV612, CV620, CV630, CV730 Cameras

• For Select Marshall HD Prime Lenses

• Designed for Use with CS-Mount Cameras
• For 1/2.7" Image Format Sensors
• 2.8 to 12mm Focal Length
• f/1.4 Maximum Aperture
• Auto Iris, Manual Zoom & Focus with Lock

• Six Lenses Included
• M12 Lens Mount
• Supports up to 3MP Resolution
• Multi-Compartment Case Included

• Protects from Sun / Strong Light
• Attaches by Optional Touch Fasteners

• Compact PTZ Keyboard and Joystick
• LCD Screen for Simple Setup and Use
• OSD Menu/Pan/Tilt/Zoom Control Functions
• Connects Up to 225 Cameras
• Baudrates: 2400/4800/9600/19200/38400bps

• 1/1.8" 3.2MP Sony Exmor Sensor
• Accepts C/CS Mount Lenses
• Capture up to 1080p60 Video
• Global Shutter, Tri-Level Genlock Sync
• 3G/HD-SDI & HDMI Outputs
• Digital Image Stabilisation, AWB

• M12 Lens Mount
• Maintains Camera's IP67 Rating
• 6.0mm Lens
• f/2.0 Aperture
• IR-Cut Coating on Rear Element

• Capture up to 1080p60 Video
• M12 Mount with Removable 4mm Lens
• IP, NDI|HX, SRT & HDMI Outputs
• Stream, Control & Power via PoE
• NDI, VISCA-over-IP/RS-485 & IP Control

• Capture up to UHD 4K60 Video
• M12 Mount with Removable 4mm Lens
• IP, NDI|HX, SRT, and HDMI Outputs
• Stream, Control, and Power via PoE
• NDI, VISCA-over-RS-485, IP Control

• Capture up to 1080p60 Resolution
• 1/2.2" CMOS Sensor, C/CS Lens Mount
• NDI|HX3, SRT, HDMI Video Output
• VISCA-over-IP, NDI, RCP Control
• Power via PoE or Power Supply

• Weatherproof Dome
• Impact-Resistant Polycarbonate
• Thermostatically Controlled
• For CV612/CV620/CV630 PTZ Cameras

• For Marshall CV503, CV506, CV565 Cameras
• For Marshall CV225, V-1292 Cameras
• 3MP Resolution M12 Lens Mount
• Works with HD Board Level Cameras