Drawmer
Drawmer ISTX-4X4 Isolation Transformer for 4X4 (Kickbox & Rackmount)
- A transformer for the Drawmer 4X4R - Rackmount Active Splitter
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$179.00
Drawmer 1976 Stereo Three Band Saturation and Width Processor
- Powerful 3 Band all Analogue Saturation for adding warmth to both your digital and analogue sounds.
- Designed to Inject character to your audio reminiscent of 1970's era gear and remove the sanitized harshness that digital recordings suffer from
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,579.00
Drawmer MPA-90 Power Amplifier
- 90+90Wrms into 4 Ohms.
- 50+50Wrms into 8 Ohms.
- 1x180W into 8 Ohms bridged mode.
- Stereo/Mono switch to use as a Stereo amplifier or as a Monoblock in Bridged or Bi-Amp Modes.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,099.00
Drawmer 1978 Stereo Tone Shaping FET Compressor
- Fast Reacting Stereo FET Design compressor with excellent Left/Right Tracking across the Full Range of compression and in a 1u rack mount housing.
- Threshold, Ratio, Attack and Release controls and Gain Reduction Metering provide familiar and intuative control over the audio. Anyone that knows how to use a compressor can operate the 1978.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,579.00
Drawmer 1974 Stereo Parametric Equalizer
- Vintage-style 4-band parametric equalization
- Inspired by classic 1970s-era analog equipment
- Delivers classic sonic clarity and control at an affordable price
- Stereo operation with one set of controls for both channels
- Accurate, indented potentiometers provide precision for quick and easy recall
On Backorder
You Pay:
$1,519.00
Drawmer DS101 500 Series Noise Gate
- Fully featured noise gate based on the industry standard DS201.
- Takes up a single 500 series slot.
- Proprietary Hysteris or “trigger stabilization” to prevent “chatter” around the threshold.
- Fully variable high pass and low pass filters for “frequency conscious” gating.
- Comprehensive envelope control, attack, hold, decay, and range.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$589.00
Drawmer 1968 MK11 Dual Channel Vacuum Tube Compressor
- Switchable BIG and BIGGER control on each channel
- Dual mono or true stereo link operation
- Side chain access and side chain listen facility
- VU metering of gain reduction and output levels
- Switchable +10dB mode on VU re-scales the meter for users working at ‘hot’ output levels.
- VU red warning glow to signify ‘approaching clipping’
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,999.00
Drawmer DS201 Dual Noise Gate
- Variable high pass and low pass filters for "frequency conscious" gating
- Comprehensive envelope control, attack, hold, decay, and range
- Key input for external triggering
- "Key listen" facility
- Extremely fast attack time, to preserve the natural attack of the sound
- Balanced inputs and outputs
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$995.00
Drawmer DL441 Quad Auto Compressor Limiter
- Auto Attack and Release
- Peak Level Limiter
- Bypass
- Stereo Linking
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,449.00
Drawmer DL241 1U Dual Compressor/Limiter Rackmount
- Dual channel
- Compressor - Combines the smoothness of the 'Soft Knee' principle with the precision of a ratio control switchable for auto or manual control of Attack and Release times
- Peak level-'Zero Response Time', 'Zero Overshoot' circuitry provides an absolute limit to the peak level of the output signal, adjustable from 0dB to +16dB above system level
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,089.00
Drawmer CMC7 Compact Monitor Controller
- Compact 8-channel monitor controller
- Ultra-low noise and transparent circuit design
- Covers 5.1, 7.1, quadraphonic, DTS, Dolby Digital EX, THX Surround EX, DTS-HD, Dolby Atmos, and more
- Large, ultra-precise volume knob supplies smooth volume changes
- Stereo Mix switch enables you to check your surround mix in stereo
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$919.00
Drawmer DL241B XLR 1U Dual Compressor/Limiter
- 2 channel, 1 rack unit Auto/Manual Gate/Compressor/Limiter
- Manual attack and release control
- Proprietary "Programme Adaptive" soft gate (envelope follower)
- Proprietary auto compressor with slope based attack and envelope following release
- Zero overshoot limiter (+20dB)
- Intergrated circuit VCA
- Proprietary log level detector (not RMS)
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,199.00
Drawmer MXPro-60 Front End One Channel Strip with Multi-band Tube Saturation
- Channel strip for studio and live sound
- Switchable for mic, line, or instrument-level signals
- Switchable 48V phantom power and phase reverse
- Program-adaptive Gate, VCA compressor, De-esser, and EQ
- Multiband "Tube Saturation" feature for subtle warming effects
- Limiter on the output stage with a preset threshold (+16dB)
On Backorder
You Pay:
$899.00
Drawmer MC2.1 Desktop Monitor Controller
- Ultra-low noise and transparent circuit design
- Linear power supply with low hum toroidal transformer and internal voltage selector switch
- Three balanced stereo speaker outputs, plus a dedicated mono speaker/sub-woofer output
- All outputs with individual L/R trims under unit to provide complete control over level matching
- Timed relay protection on all speaker outputs to prevent power up/down thumps.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$919.00
Drawmer CMC3 Compact Monitor Controller
- Ultra-low noise and transparent circuit design
- Source switches may be active in any combination
- 4 inputs: SPDIF (192kHz/24Bit), 2 analog balanced 1/4" stereo, 3.5mm front-panel Aux jack
- 3 pairs of speakers plus a mono sub may be switched individually and simultaneously or provide A/B comparisons
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$919.00
Drawmer 1973 2U-3 Band Stereo FET Compressor
- 3-band stereo compressor for mixing and mastering
- FET compression reacts fast with a soft knee
- High-grade signal path all the way through, with impeccable left/right tracking across the full compression range
- Variable crossover frequencies, with mute and bypass switches for easy monitoring of each band
- Big and Air modes adds low-end body and high-end sparkle
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,999.00
Drawmer 1960 2-channel Tube Microphone Preamp & Compressor
- 2 Channel, 2 rack space vacuum tube compressor with mic/line/instrument preamp
- Proprietary vacuum tube/FET based discrete VCA
- Classic attack/release curvers used in vintage compressors
- Auto ratio depending on signal attack slope (1:30 maximum)
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$3,029.00
Drawmer SL22 1U - Stereo Speaker / Headphone Protector / Sound Level Limiter
- 2 channels
- 19 inch rack size
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$949.00
Drawmer Kickbox 4X4 - Portable Active Splitter
- 4 studio grade mic/line pre-amps
- Independent input bargraph metering
- 66db of variable gain
- 48v phantom power
- Mic/line switching
- Headphone listen facility
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,829.00
Drawmer DMS-2 D-Clock Master Clock Distributor
- 2 in x 20 out Clock Measurement and Distribution Amplifier
- Inputs: BNC with zero latency.
- AES with with zero latency.
- Outputs: BNC, AES.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,279.00
Drawmer CMC2 Compact Monitor Controller
- Loaded with the same transparent audio circuitry as Drawmer's high-end offerings
- Streamlined design is tailor-made for smaller project studios
- Accommodates two sets of studio monitors and a subwoofer
- Built-in headphone amplifier with dedicated level control
- 3 inputs including 2 TRS jacks and a 1/8" auxiliary jack
On Backorder
You Pay:
$459.00
Drawmer MC1.1 Monitor/Headphone Pre-Amp
- Ultra low noise and transparent circuit design.
- Linear power supply with low hum toroidal transformer and internal voltage selector switch.
- 3 Input Sources - Balanced XLR, MP3 Player 3.5mm Jack & Switchable Line/Phono (RIAA MM) RCA.
- Two switchable output stages, Balanced XLR and RCA.
- Mono Sub woofer output available simultaneous to balanced outs.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$789.00
Drawmer SP2120 1U - Stereo Speaker Protector
- Key Holder access only.
- Takes only minutes to install.
- Tamper-Proof bracket (available separately) to lock-in the XLRs and conform to Local Authority regulations.
- Dual 16 segment Left/Right bargraphs for ’at a glance’ level metering.
- ’Protection’ processing 16 segment bargraph display.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$995.00
Drawmer SP-TPC Tamper Proof Cover for SP2120 & SL22
- Suitable For SP2120
- Perfect For Maintaining Security
- Securely Locks XLRs in Place
- Extremely Difficult to Remove
- Ideal For Conforming to Local Noise Abatement Regulations
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$119.00
Drawmer MC7.1 Surround Monitor Controller
- Pristine, ultra low noise & transparent circuit design gives you an accurate representation of your mix whether it be surround or stereo.
- Each of the eight 7.1 speakers can be cut or soloed individually.
- Stereo outputs (including those mixed down from surround) can be monitored via the main stereo speaker outputs or the FL and FR from the surround speakers.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$2,299.00
Drawmer LA12 1U - Line Distribution Amplifier
- One stereo input with master gain and balance controls.
- Twelve stereo outputs each with individual output level controls.
- If more than twelve stereo outputs are required an auxiliary stereo output, which follows the input gain and balance controls, can be linked to the input of a second LA12.
- The unit will operate at system levels in the range - 20dB to + 10dB.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$979.00
Drawmer MX50-Pro Dual Vocal De-Esser
- Floating Threshold System: This intelligent Drawmer circuitry has a floating Threshold that adapts to the dynamics and level of the incoming material, eliminating the need for a manual Threshold control and creating more natural results.
- Air function: As sibilance rarely occurs above 10KHz this feature adds back high frequency 'gloss' in excess of 12KHz preserving upper harmonics and increasing the transparency of operation.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$739.00
Drawmer MC3.1 Expanded Desktop Monitor Controller
- Ultra low noise and transparent circuit design.
- Source switches for both Main & Cue can be active in any combination. 5 Inputs in Total - 1x Digital AES/SPDIF Neutrik XLR/JACK COMBI & 2 balanced analogue Neutrik XLR/JACK COMBI and 1 stereo RCA Analogue on the Rear Panel & 1 3.5mm Front Panel Aux.
- 3x Speakers Plus a Mono Sub can be switched individually & simultaneously or give A/B comparisons. Each has level trims to provide precise channel matching.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,589.00
Drawmer MCB Rack Mounting Kit
- Capable of Mounting Either MC2.1 or MC1.1
- Rack Ears
- High Quality Mounting Screws
- Durable Metal Front Panel
- Aux Cable
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$189.00
Drawmer ISTX - Isolation Transformer For DA6 Distribution Amplifier
- Replacement Isolation Transformer for the Drawmer DA6.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$94.95
Drawmer 4X4R Rackmount Active Splitter
- 4 Studio grade Mice/line pre amps
- Independent input Bargraph metering
- 66dB of variable gain
- 48V phantom power
- Mic/line switching
- Headphone monitoring facility
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,839.00
Drawmer DMS-6 D-Clock-R - Dual Redundant Clock Distribution
- Dual Redundant Power Supply via 2 x universal voltage filtered mains power inlets for continuous operation & reliability
- LCD Display with 3 sample rate measurement modes and accurate to 2ppm
- Auto-Sensing Dual Redundant WordClock/AES3id BNC Inputs provide continuous operation and added dependability
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,549.00
Drawmer DMS-4 M-Clock Lite Master Clock Generator
- High quality clock generator
- Forward compatible with high speed clocks
- Long term frequency accuracy of +/- 1ppm.
Special Order
Usually Ships in 4 - 6 Weeks
You Pay:
$1,399.00
