Music & Audio
K-Tek K-BC Boom Pole Cradle Support for C and Microphone Stands
- Holder mount for your boompole
- Two cradles cushions the pole
- Isolate the pole from vibration
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$359.00
K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version)
- Short Version
- Fits Most Cylindrical Microphones
- Stretchable 4-point Polymer Suspenders
- Standard 3/8" - 16 Thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek K-SPT Shoe Plate Mount
- Flat Plate Mount
- Camera Shoe Mount
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Windscreen Slip-On Windscreen (Extra Short)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Zeppelin Slip-On Windscreen (Long)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Microphone Windscreen Topper for Zoom H2n
- For Zoom H2n Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek KPCK9 Coiled Cable Kit for KlassicPro 2.7m Boompole
- For KP9 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF Mighty Lo Pro Connector (12.2m)
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 12.2 m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
K-Tek Microphone Windscreen Topper for Zoom H6 with XY Capsule
- For Zoom H6 Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek KP16TA Mighty Boom 6-Section Graphite Boompole with Coiled Cable & Transmitter Adapter (4.9m)
- 6 x Sections, Graphite, Extends to 4.9m
- Collapses to 118.6cm
- Sidekick Attachment for Transmitter
- Removable Headpiece, Coiled Cable
- Strong, Rigid, Lightweight at 1.3 kg
- Removable Rubber Bumper Bottom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,099.00
K-Tek K-HG 6" Foam Lined Hand Grip with Boom Pole Head and 3/8" Threading
- 3/8" Threading
- 6" / 15.24cm Length
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF Mighty Lo Pro Connector) 6m
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 6 m
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF (Mighty Lo Pro Connector) 3m
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 3 m
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek XLR Coiled Cable with Neutrik Standard Connectors (3m)
- Neutrik M to Neutrik F XLR Connector
- Stretches to 10' / 3m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$159.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME64 Microphone
- Fits Sennheiser ME64 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME66 Microphone
- Fits Sennheiser ME66 Microphone
- Length: 19.05cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser MKH8060 Microphone
- Fits Sennheiser MKH8060 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Rode NTG2 Microphone
- Fits Rode NTG2 Microphone
- Length: 15.24cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek KP20FT Mighty Boom 6-Section Boompole w/ Straight Cable & Flow-Through Bottom Module (6.2m)
- 6 x Sections, Graphite, Extends to 6.2m
- Collapses to 1.5m
- Straight Cable/Right-Angle XLR Connector
- Bottom Module with Flow-Through
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.4kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$2,149.00
K-Tek KAMR Mounting Ring for KAMT/KAML Antenna Mounts
- For use on KAMT & KAML Antenna Mounts
- Use to Attach Multiple Sharkfin Antennas
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$139.00
K-Tek KPTA Sidekick Plug-On Transmitter Adapter for KlassicPro Boompoles
- Attach Plug-On Transmitter to KlassicPro
- Modular Attachment, No Soldering Needed
- Requires KPCK Cable Kit for KlassicPro
- Works with Any Plug-On Transmitter
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$339.00
K-Tek KPCK6 Coiled Cable Kit for KlassicPro 1.8m Boompole
- For KP6 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
K-Tek KPCK12 Coiled Cable Kit for KlassicPro 3.6m Boompole
- For KP12 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
K-Tek K-HGW 6" Foam Lined Wired Hand Grip with XLR Output Base, Boompole Head and 3/8" Threading
- Side Exiting XLR Output
- Foam Lined Grip
- Boompole Head and 3/8" Thread
- 6" / 15.24cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Topper Windscreen for DR-100
- For the Tascam DR-100
- Reduces Wind Noise
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek KR-50-180 Fur Windsock for Rode Video Mic
- 50 x 180mm
- Fits Over Existing Windscreen
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
K-Tek Microphone Windscreen Topper for Zoom H6 with MS Capsule
- For Zoom H6 Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek Airo Fuzzy Windscreen 1
- Open-Cell Foam Covered by Faux Fur
- Faux Fur Made of Natural Looking Fibre
- Provides Optimal Wind Noise Reduction
- Seamless Front Panel
- Fits Most Common Shotgun Microphones
- Fits Mics up to 0.89" in Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
K-Tek KSTMC1 Stingray Microphone Case for Two Shotgun Microphones
- Protects Against Physical Damage
- Clamshell Design
- Semi-Rigid Case with External Ribs
- Internal Divider and Mesh Sleeve
- 32.76cm Interior Length
- Holds Mics with Diameters up to 2.8cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
K-Tek KE-144 Avalon Series Aluminum Boompole (Uncabled)
- Measures
- Five Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$579.00
K-Tek KE-110CCR Avalon Series Aluminum Boompole with Internal XLR Cable
- Measures 0.9 to 2.8 m
- Five Locking Sections
- Internal Coiled Cable
- Side XLR Connection
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$659.00
K-Tek KE-110CC Avalon Series Aluminum Boompole with Internal XLR Cable
- Measures 0.8 to 2.8 m
- Five Locking Sections
- Internal Coiled Cable
- Bottom XLR Connection
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$619.00
K-Tek KE-110 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.8 to 2.8 m
- Five Locking Sections
- Captive-Collet Coupling System
- Made in the USA
Usually ships in 2 - 3 weeks
You Pay:
$539.00
K-Tek KEG-100CC Avalon Series Graphite Boompole with Internal Coiled XLR Cable
- Measures 65.8 to 267 cm
- Five Locking Sections
- Bottom 3-Pin XLR Connection
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,169.00
K-Tek KE-89 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.8 to 2.2 m
- Four Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$399.00
K-Tek KE-79CCR Traveler Aluminum Boompole with Internal Coiled XLR Cable (Right Angled)
- Avalon Series
- Measures 0.54 - 2.04 m
- 6 Locking Sections
- Internal Coiled Cable
- Right Angled XLR Connection
Usually ships in 2 - 3 weeks
You Pay:
$659.00
K-Tek KE-69 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.7 to 1.8 m
- Three Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$329.00
K-Tek KE-144CCR Avalon Series Aluminum Boompole
- Internal Coiled Cable
- Side XLR Connection
- 5 Locking Sections
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$729.00
K-Tek KEG-150CCR Avalon Series Graphite Boompole with Internal Coiled XLR Cable
- Measures 99.1 to 381 cm
- Five Locking Sections
- Side 3-Pin XLR Connection
- Lightweight Graphite Design
- Captive-Collet Coupling System
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,499.00
K-Tek K-S40 Rubber Mount for K-SM/K-SSM (pair)
- Pair of replacement shock mounts
- 19-25 mm diameter
- Hold your microphone in place
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$55.95
K-Tek KP18VFT Mighty Boom 5-Section Graphite Boompole, Straight Cable & Bottom Module (5.6 m)
- 5 x Sections, Graphite, Extends to 5.6 m
- Collapses to 1.58 m
- Straight Cable/Right-Angle XLR Connector
- Bottom Module with Flow-Through
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.270 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,989.00
K-Tek KP18V Mighty Boom 5-Section Graphite Boompole (Uncabled, 5.5m)
- 5 x Sections, Graphite, Extends to 5.5 m
- Collapses to 1.4 m
- Removable Headpiece, No Cable
- Strong, Rigid, Lightweight at 997 g
- Removable Rubber Bumper Bottom
- Sure-Grip Oval Divots
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,679.00
K-Tek KP12TA Mighty Boom 6-Section Graphite Boompole with Coiled Cable & Transmitter Adapter (3.7m)
- 6 x Sections, Graphite, Extends to 3.7m
- Collapses to 1.03 m
- Sidekick Attachment for Transmitter
- Removable Headpiece, Coiled Cable
- Strong, Rigid, Lightweight at 1.1 kg
- Removable Rubber Bumper Bottom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,829.00
K-Tek Topper for Sanken CUB-01
- Faux Fur Wind Protection
- Fits Sanken CUB-01
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$79.95
K-Tek K-152CC 5-Section Klassic Series Lightweight Boompole
- 3' / 0.91 cm to 12.8' / 3.9 cm
- 3-pin XLR Connection
- Coiled Cable
- Bottom Exit XLR Connection
- 5 Telescoping Sections
- High-Density Graphite Construction
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,439.00
K-Tek KP16FT Mighty Boom 6-Section Graphite Boompole, Straight Cable & Bottom Module (5m)
- 6 x Sections, Graphite, Extends to 5 m
- Collapses to 1.25m
- Straight Cable/Right-Angle XLR Connector
- Bottom Module with Flow-Through
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.179 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,919.00
K-Tek KP9TA Mighty Boom 6-Section Graphite Boompole with Coiled Cable & Transmitter Adapter (2.8m)
- 6 x Sections, Graphite, Extends to 2.85m
- Collapses to 77.5cm
- Sidekick Attachment for Transmitter
- Removable Headpiece, Coiled Cable
- Strong, Rigid, Lightweight at 952g
- Removable Rubber Bumper Bottom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,599.00
K-Tek KP10VFT Mighty Boom 5-Section Graphite Boompole, Straight Cable & Bottom Module (3.1m)
- 5 x Sections, Graphite, Extends to 3.1m
- Collapses to 97.8cm
- Straight Cable/Right-Angle XLR Connector
- Bottom Module with Flow-Through
- Removable Headpiece
- Strong, Rigid, Lightweight at 1.08kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,539.00
K-Tek KP5CCR Mighty Boom 6-Section Graphite Traveller Boompole, Coiled Cable & XLR Side Exit (1.6m)
- Traveller Boompole Collapses to 55cm
- 6 x Sections, Graphite, Extends to 1.6m
- Coiled Cable, Right-Angle XLR Connector
- Bottom Module with XLR Side Exit
- Removable Headpiece
- Strong, Rigid, Lightweight at 680g
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$1,169.00
K-Tek KE-79 Avalon Series Aluminum Boompole (Uncabled)
- Measures 0.51m to 2m
- Six Locking Sections
- Captive-Collet Coupling System
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$509.00