Music & Audio
K-Tek KMICF Mic Flag (Square, Black)
- For Handheld ENG Microphones
- For Small/Medium and Medium/Large Mics
- For Microphones up to 4.06 cm in Diameter
- Four 6.35 x 6.35 cm Logo Surfaces
- Lightweight, Secure Universal Fit
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$26.95
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (White, 3-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$41.95
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Grey, 3-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$41.95
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Black, 3-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$41.95
K-Tek Stingray Kickstand (Purple)
- Kickstand for Stingray Mixer Bag
- Lean Bag Back Securely on Table/Surface
- Attaches via Hook-and-Loop Fastener
- Easy Access to Mixer Interface
- Comfortable and Convenient Monitoring
- For Stingray X-Series Mixer Bags
Usually ships in 2 - 3 weeks
You Pay:
$51.95
K-Tek K-S40 Rubber Mount for K-SM/K-SSM (pair)
- Pair of replacement shock mounts
- 19-25 mm diameter
- Hold your microphone in place
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$55.95
K-Tek Polymer Microphone Suspenders (Pair) for Shock Mounts
- Rugged replacement accessory
- 4 Point Design
- Provides optimal shock and motion isolation
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$59.95
K-Tek Boom and Accessory Clip
- Attach Boompole to Harness
- Doubles as Cable or Accessory Holder
- Hands-Free, Secure
- Clip Rotates
- Hook-and-Loop Fastener
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$59.95
K-Tek Topper for Sanken CUB-01
- Faux Fur Wind Protection
- Fits Sanken CUB-01
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$79.95
K-Tek Topper Windscreen for DR-40
- Designed for the Tascam DR-40
- Black Short Faux Fur
- Reduces Unwanted Wind Noise
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$79.95
K-Tek KSHPS Stingray Heat Block Transmitter Pouch (Small)
- Soft and Comfortable to Wear
- Heat-Resistant Heatblock Material
- Relieves Discomfort of Hot Transmitters
- Super-Insulating Properties
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$79.95
K-Tek K-SSA Shoe Step Adapter
- Elevates Accessories 2" / 5cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$80.95
K-Tek Stingray HeatBlock Pieces for Wireless Transmitters (6 Pieces)
- Relieves Discomfort of Hot Transmitters
- Heat-Resistant HeatBlock Material
- Soft and Comfortable to Wear
- 2 x Mini HeatBlock Pieces
- 2 x Small HeatBlock Pieces
- 2 x Medium HeatBlock Pieces
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$80.95
K-Tek KSBCH1 Stingray Boom Cup Holder
- For Storing and Holding Boompoles
- Fast and Easy to Use
- Can Attach to MOLLE Straps
- Screws into Various Carts
- Suitable for Gear Storage Racks
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$80.95
K-Tek KSHPMINI Stingray Heat Block Transmitter Pouch (Mini)
- Soft and Comfortable to Wear
- Heat-Resistant Heatblock Material
- Relieves Discomfort of Hot Transmitters
- Super-Insulating Properties
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$81.95
K-Tek KR-50-180 Fur Windsock for Rode Video Mic
- 50 x 180mm
- Fits Over Existing Windscreen
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
K-Tek K-SPT Shoe Plate Mount
- Flat Plate Mount
- Camera Shoe Mount
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Microphone Windscreen Topper for Zoom H2n
- For Zoom H2n Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek Microphone Windscreen Topper for Zoom H6 with XY Capsule
- For Zoom H6 Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek K-HG 6" Foam Lined Hand Grip with Boom Pole Head and 3/8" Threading
- 3/8" Threading
- 6" / 15.24cm Length
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (White, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Grey, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Black, 10-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
K-Tek Topper Windscreen for DR-100
- For the Tascam DR-100
- Reduces Wind Noise
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek Microphone Windscreen Topper for Zoom H6 with MS Capsule
- For Zoom H6 Handy Recorder
- Protects from Rain and Dust
- Reduces Wind Noise
- Synthetic Black Fur
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$109.00
K-Tek Airo Fuzzy Windscreen 1
- Open-Cell Foam Covered by Faux Fur
- Faux Fur Made of Natural Looking Fibre
- Provides Optimal Wind Noise Reduction
- Seamless Front Panel
- Fits Most Common Shotgun Microphones
- Fits Mics up to 0.89" in Diameter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
K-Tek KAMR Mounting Ring for KAMT/KAML Antenna Mounts
- For use on KAMT & KAML Antenna Mounts
- Use to Attach Multiple Sharkfin Antennas
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$139.00
K-Tek KSTMC1 Stingray Microphone Case for Two Shotgun Microphones
- Protects Against Physical Damage
- Clamshell Design
- Semi-Rigid Case with External Ribs
- Internal Divider and Mesh Sleeve
- 32.76cm Interior Length
- Holds Mics with Diameters up to 2.8cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
K-Tek XLR Coiled Cable with Neutrik Standard Connectors (3m)
- Neutrik M to Neutrik F XLR Connector
- Stretches to 10' / 3m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$159.00
K-Tek Windscreen Slip-On Windscreen (Extra Short)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Zeppelin Slip-On Windscreen (Long)
- Faux Fur
- For 17 to 25mm Diameter Mics
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF (Mighty Lo Pro Connector) 3m
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 3 m
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME64 Microphone
- Fits Sennheiser ME64 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser ME66 Microphone
- Fits Sennheiser ME66 Microphone
- Length: 19.05cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Sennheiser MKH8060 Microphone
- Fits Sennheiser MKH8060 Microphone
- Length: 12.70cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek Fuzzy Slip-on Windscreen for Rode NTG2 Microphone
- Fits Rode NTG2 Microphone
- Length: 15.24cm
- Faux Fur Protects Against Wind Noise
- Tightly Woven Fabric Backing
- Open Cell Foam Body
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$179.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF Mighty Lo Pro Connector) 6m
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 6 m
- Made in the USA
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$199.00
K-Tek K-Mount Microphone Shock Mount Suspension System (Short Version)
- Short Version
- Fits Most Cylindrical Microphones
- Stretchable 4-point Polymer Suspenders
- Standard 3/8" - 16 Thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (White, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Grey, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek K-HGW 6" Foam Lined Wired Hand Grip with XLR Output Base, Boompole Head and 3/8" Threading
- Side Exiting XLR Output
- Foam Lined Grip
- Boompole Head and 3/8" Thread
- 6" / 15.24cm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek Airo Fuzzy Windscreen for Lavalier Microphone (Black, 25-Pack)
- Reduces Wind and Breath Noise
- Faux Fur Material Ideal for Outdoor Use
- Protects against Rustling/Handling Noise
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek K-Mount Microphone Shock Mount Suspension System
- Fits Most Cylindrical Microphones
- Stretchable 4-point Polymer Suspenders
- Standard 3/8" - 16 Thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$209.00
K-Tek KPCK9 Coiled Cable Kit for KlassicPro 2.7m Boompole
- For KP9 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
K-Tek XLR Coiled Cable with Neutrik and KPRCF Mighty Lo Pro Connector (12.2m)
- Neutrik M 3-pin to K-Tek Low Profile XLR 3-pin F
- Stretches to 12.2 m
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
K-Tek KPCK6 Coiled Cable Kit for KlassicPro 1.8m Boompole
- For KP6 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$249.00
K-Tek KPCK12 Coiled Cable Kit for KlassicPro 3.6m Boompole
- For KP12 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$249.00
K-Tek Mighty Boom Cable Coiled XLR Cable (1.2m)
- Heavy-Duty XLR Cable
- Double-Wired to Protect Against Failure
- Coiled Design Stretches to over 1.2m
- 53cm Straight End
- Neutrik Connectors
- Each Contact Soldered with 2 Wires
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$259.00
K-Tek KPCK16 Coiled Cable Kit for KlassicPro 4.9m Boompole
- For KP16 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$299.00
K-Tek KPCK20 Coiled Cable Kit for KlassicPro 6m Boompole
- For KP20 KlassicPro Boompole
- Right-Angle, Low-Profile 3-Pin XLR F
- No Soldering Required
- Requires KPCCR Bottom Module
- Thicker Gauge Wire
- Offers Stronger RF Interference
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$299.00