Mounting Hardware
9.SOLUTIONS Python Clamp with 5/8" Pin
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Pin
- 3/8"-16 (M10) Connection
In stock
Ships Monday
You Pay:
$68.95
9.SOLUTIONS Savior Clamp
- Load Capacity: 30 kg
- Weighs 0.44 kg
- 60 mm Jaw Opening
- Accommodate odd shapes
In stock
Ships Monday
You Pay:
$87.95
9.SOLUTIONS Savior Clamp Mini
- Load Capacity: 30 kg
- Weighs 135 g
- 30 mm Jaw Opening
In stock
Ships Monday
You Pay:
$70.95
9.SOLUTIONS Baby Pin Set
Increase mounting utility to anything with a 3/8" thread
In stock
Ships Monday
You Pay:
$46.95
9.SOLUTIONS Savior Clamp with 5/8" Stud
- Load Capacity: 29.9 kg
- Weighs 0.45 kg
- 5.9 cm Jaw Opening
In stock
Ships Monday
You Pay:
$94.95
ANDYCINE A-SC-04 Vlogger Multifunctional Crab Clamp
- Clamping Range of 0.6 to 1.65"
- 1/4"-20 Male and Female
- 3/8"-16 Female and ARRI Accessory Mount
- Rubber-Padded Clamp Jaws
In stock
Ships Monday
You Pay:
$59.95
Impact Female 1/4"-20 to Male 3/8" Thread Adapter
Brass female to male thread adapter
In stock
Ships Monday
You Pay:
$10.95
Impact 3/8" and 1/4"-20 Adapter Spigot
Convert an accessory with a female thread to a male thread
In stock
Ships Monday
You Pay:
$16.95
Impact CA-102 Rapid Baby to 3/8" Male Threaded Adapter
For mounting of a light fixture, flash, or camera
In stock
Ships Monday
You Pay:
$24.95
Impact 3/8" to 3/8" Adapter Spigot
Convert an accessory with a female thread to a male thread
In stock
Ships Monday
You Pay:
$9.95
Kupo KSC-102 Vacuum Suction Cup Mount with Cheese Plate (25cm)
- Pumping Suction Cup
- Rubber and Silicone Construction
- Payload: 15kg
- Supplied with Pad Protector
In stock
Ships direct in 2 - 3 working days
You Pay:
$439.00
Kupo KS-078 5/8" Baby Stud with 3/8"-16 Male Thread
- Length: 4"
- Textured Non-Twist Stud End
In stock
Ships Monday
You Pay:
$16.95
Kupo KCP-601-L Super Viser Clamp (End Jaw, 17.5")
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships direct in 2 - 3 working days
You Pay:
$169.00
You Pay:
$9.95
Kupo KCP-101 Max Arm
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
In stock
Ships direct in 2 - 3 working days
You Pay:
$155.00
Kupo KCP-101W Max Arm with Hand Wheel
- Adjustable Aluminium Arm
- Two Studs Attached to Ball Joints
- Central Elbow Rotates 360°
- Quick, Easy Positioning
In stock
Ships direct in 2 - 3 working days
You Pay:
$149.00
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships Monday
You Pay:
$139.00
Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)
- For Super Clamp System
- Replaces #2907
In stock
Ships Monday
You Pay:
$16.95
Manfrotto 035 Super Clamp without Stud
- Lightweight cast alloy
- Holds just about anything
- Mount on any tube 13 - 55 mm
- Jaw Opening of 1.3 - 5.3 cm
- Stud not included
In stock
Ships Monday
You Pay:
$66.95
You Pay:
$13.95
Manfrotto 148KN Reducing Bushing Set
Convert a 3/8 inch screw and a 1/4 inch female thread - 5 set
In stock
Ships Monday
You Pay:
$12.95
Manfrotto 119 Adapter Spigot
Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In stock
Ships Monday
You Pay:
$13.95
You Pay:
$45.95
SmallRig 4249 Super Clamp with ARRI Rosette Mount
- 14mm-55mm clamping range
- Features built-in 1/4"-20 threaded hole
- Made of aircraft-grade aluminium alloy
- Increased sturdiness and durability
In stock
Ships Monday
You Pay:
$50.95
SmallRig 2220 Super Clamp
The jaw is fitted with rubber pads on the inside removing the wear and tear of the rod it clamps on. The clamp can open 10 to 55 mm.
In stock
Ships Monday
You Pay:
$44.95
SmallRig 1610 1/4" to 3/8" Screw Adapter (5 pcs)
- Female 1/4" Thread
- Male 3/8" Thread
In stock
Ships Monday
You Pay:
$5.95
SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread
Mount onto cameras, lights, umbrellas and more
In stock
Ships Monday
You Pay:
$13.95
Ulanzi R094 Super Clamp with 6.6cm Ball Head Arm
- Mounts on Surfaces 1.3 to 6.1cm Wide
- 6.6cm Ball Head Arm, 1.5kg Load Capacity
- 360° Mini Ball Head on Both Ends
- 1/4"-20 & 3/8"-16 Mounting Studs
- Nonslip Clamp Pads
- Wing-nut Fasteners
In stock
Ships Monday
You Pay:
$26.95
Ulanzi Upgraded Claw Backpack Clamp with Quick Release
- Attaches Claw QR Set to Strap or Belt
- Claw-Locking Quick Release System
- Load Capacity: 2.5kg
- Clamp Capacity: 58mm-15mm
- T-Type Cyclone Lock
In stock
Ships Monday
You Pay:
$64.95
Ulanzi UURig R060 Super Crab Clamp
- Fits Surfaces from 1.5 to 4.3cm Wide
- 1/4"-20 & 3/8"-16 Threads & Screws
- Nonslip Silicone Interior Design
- Locking Lever, Aluminium Construction
- 1 x ARRI-Style Anti-Twist Mount
In stock
Ships Monday
You Pay:
$30.95
Ulanzi R096 Double Super Clamp (6.3")
- Powerful Double Clamps, Full of Force
- Clamping range: 12-58mm, Max loading weight is 1.5KG
- Metal Material, Weatherproof
- Built-in Silicone Pad
In stock
Ships Monday
You Pay:
$39.95
iFootage Spider Crab Vehicle Suction Cup VS-146
- For Use with Spider Crab Vehicle Mount
- Create Smooth Motion Shots on Vehicles
- 1/4"-20 & 3/8"-16 Screws/Thread Mounts
- 30 kg Maximum Payload
In stock
Ships Monday
You Pay:
$219.00