Roland VC-1-SC Up/Down/Cross Scan Converter
Features
- HDCP Support
- Built-in Frame Synchronizer and Scaler
- Audio Embedding or De-Embedding
- VC-1 RCS, PC/MAC Control Application
- 3G (Level A&B) /HD/ SD SDI
- HDMI In/Out, RGB/Component In
Description
Roland's new video converter the Roland VC-1-SC Up/Down/Cross Scan Converter address the demand for high-quality, lossless video and audio converters for live/post production as well as installed systems.
The VC-1 Video Converter series provides uncompromising picture quality by maintaining the video characteristics of the original signal. There are no interlacing artifacts or other conversion or signal errors sometimes found with other video converters. The VC-1 series also features an on-board re-clocker to compensate for attenuation of SDI signals carried over long distances. The VC-1 series also supports both level A and B 3G-SDI, letting you connect a variety of higher quality SDI sources. The VC-1-SC also enables input from analog sources such as RGB and component along with built-in scaler.
The VC-1 series is HDCP compliant allowing you to convert or pass-through HDCP signals with the exception of any SDI output. Selectable audio embedding or de-embedding lets you route different audio sources to or from video devices.
Key Features
- 3G (Level A&B) /HD/ SD SDI
- HDMI In/Out
- RGB/Component In
- Composite In
- HDCP Support
- Built-in Frame Synchronizer and Scaler
- Audio Embedding or De-Embedding
- VC-1 RCS, PC/MAC Control Application
- Up/Down/Cross, Frame Rate, I/P, and Aspect Ratio Conversion
Specifications
Input | SDI Connector: 1 x BNC type Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C HDMI Connector: 1 x Type A (19 pins) Signal Standard: HDMI HDCP support (When an HDCP-applied signal is input, output from the SDI OUT connector is stopped) RGB/Component Connector: 1 x HD DB-15 type Signal Level: 1.0 Vp-p (Y signal), 0.7 Vp-p (R/G/B/Pb/Pr signals), 5 VTTL (H/V signals) Impedance: 75 Ω Composite Connector: 1 x BNC type Signal Level: 1.0 Vp-p (Y signal), 0.286 Vp-p (C signal (NTSC)), 0.3 Vp-p (C signal (PAL)) Impedance: 75 Ω Analogue Audio Connector: RCA phono type x 1 pair (L/R) (Combined use with Analogue Audio Out Connector) Input Level: -6 dBV Maximum Input Level: +6 dBV Impedance: 22 kΩ Reference Connector: 1 x BNC type Reference Signal Format: Black Burst, Bi-level, Tri-level Reference Impedance: 75 Ω |
Output | SDI Connector: 2 x BNC type (One is Combined with SDI In Connector) Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C HDMI Connector: 1 x Type A (19 pins) Signal Standards: HDMI HDCP support Analogue Audio Connector: RCA phono type x 1 pair (L/R) (Combined use with Analogue Audio In Connector) Input Level : -6 dBV Maximum Output Level : +6 dBV Impedance : 2.2 kΩ |
SDI | Signal Standards : SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C Video Format : 1920 x 1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i,1920x1080/30PsF/29.97PsF/25PsF/24PsF/23.98PsF (Conforms to SMPTE 274M) 1280 x 720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p (Conforms to SMPTE 296M) 720 x 480/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5) Colour Format: 10 bits YCC 4:2:2 Audio Format: Linear PCM, 24 bits, 48 kHz, 16 channel (Conforms to SMPTE 299M, SMPTE 272M-C) When frame synchroniser is working, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available. |
HDMI | Video Format: 1920 x 1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i, 1280 x 720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p, 720 x 480/59.94p/59.94i, 720 x 576/50p/50i (Conforms to CEA-861-E) PC Format : 640 x 480/60/72/75/85Hz, 800x600/56/60/72/75/85 Hz, 1024 x 768/60/70/75/85 Hz, 1280 x 768/60/75/85 Hz, 1360 x 768/60 Hz, 1152 x 864/75 Hz, 1400 x 900/60/75/85 Hz, 1280 x 960/60/85 Hz, 1280 x 1024/60/75/85 Hz, 1400 x 1050/60/75 Hz, 1680 x 1050/60 Hz, 1600 x 1200/60 Hz, 1920 x 1200/60 Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11) Colour Format: 10 bits YCC 4:2:2, 8 bits YCC 4:4:4, 8 bits RGB 4:4:4 Audio Format : Linear PCM, 24 bits, 48 kHz, 8 channel |
RGB | Video Format : 1920 x 1080/60p/59.94p/50p/60i/59.94i/50i/24PsF/23.98PsF (Conforms to SMPTE 274M) 1280 x 720/60p/59.94p/50p (Conforms to SMPTE 296M) 720 x 480/59.94p/59.94i, 720x576/50p/50i PC Format : 640 x 480/60/72/75/85 Hz, 800 x 600/56/60/72/75/85 Hz, 1024 x 768/60/70/75/85 Hz, 1280 x 768/60/75/85 Hz, 1360 x 768/60 Hz, 1152 x 864/75 Hz, 1400 x 900/60/75/85 Hz, 1280 x 960/60/85 Hz, 1280 x 1024/60/75/85 Hz, 1400 x 1050/60/75 Hz, 1680 x 1050/60 Hz, 1600 x 1200/60 Hz, 1920 x 1200/60 Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11) |
Composite | Video Format : NTSC, PAL |
Audio | Embed/De-embed: 2-channel |
Frame Synchronisation | It works when enter the reference signal. When frame synchroniser is working, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available. |
Resolution Conversion | Selectable Full/LetterBox/Crop/Dot-by-Dot Type |
Frame Rate Conversion | Frame Skip/Repeat Type |
USB | 1 x USB Type B (Hi-Speed USB) |
Power Supply | 9 VDC |
Operation Temperature | 0 to 40˚C |
Dimensions (W x D x H) | 15.06 x 13.00 x 2.99 cm |
Weight | 0.50 kg |
In The Box
- Roland VC-1-SC Up/Down/Cross Scan Converter
- AC Adapter
- Power Cord
- 4 x Rubber Foot
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Roland VC-1-SC Up/Down/Cross Scan Converter
- Manufacturer: Roland
- Model: VC-1-SC
- SKU: VC1SC
- RM Product #: 57979