Batteries & Power

• An InfoLITHIUM™ rechargeable battery pack greatly extends the operating time of a compatible device
• High capacity 7.4V / 25Wh / 3410mAh
• Quick charging with optional AC-VQV10 AC Adaptor/Charger
• ActiFORCE battery technology: higher capacity, faster recharging, precise remaining power indicator

• AC to 12 VDC.
• 2-Pin Locking Connector.
• Up to 30W of Power.
• Set of Three International Plug Adapters.

• Fits Sony NP-F type batteries to provide greater battery life for your camera rig.
• Provides different output ports, including a 12V DC output port and a 7.4V DC output port.
• LED indicator for low battery warning.
• Rubber pads on the bottom for a more stable installation.

• Mount V-Mount Battery on a Rig
• Lightweight V-Lock Plate
• Clamp Fits 0.6 to 1.2" Surface
• 1/4"-20 & M4 Mounting Threads
• Durable Aluminium Construction

• Compact, lightweight, all-in-one mounting solution
• Supports different cameras in various scenarios
• Toolless installation and quick release
• Arca-Swiss quick-release plate
• 90° rotation

• Mount a V-Mount Battery on 15mm Rods
• Lightweight Aluminium V-Lock Plate
• 15mm LWS Rod Clamp with Locking Levers
• 1/4"-20, M3, M4 & ARRI-Style Threads
• Quick Release Locking Mount

• 98WH, 14.8v 6600mAh Battery
• 8A max load
• 4-stage LED gauge
• Camera Communication with Cycle Count
• USB for powering/charging mobile devices
• Smartap D-Tap Port
• V-mount

• 47Wh, 14.8V V-Mount Battery Pack
• 8A Draw, 8-Hour Runtime
• Quick Release Top Plate, 1/4"-20 Threads
• USB Type-A and D-Tap Output Ports
• 4-Stage LED Gauge

• 15cm Braided Cable
• Right-Angle Female D-Tap Port
• Right-Angle Male DC Barrel Connector
• Rubber Strain Reliefs at Both Connectors

• Attaches to the Rear of the Camera.
• Supports V-Mount Battery.
• Access to BP-U Battery Allows Hot Swaps.
• 3 D-Tap Ports & Protective Digital Fuse.

• Mounts on Any Teradek Bolt Transmitter
• Mounts on Most Teradek Bolt Receivers
• Push-Button Battery Release
• JST Connector for Powering Device
• 2 x Coaxial Power Outputs

• For select Sony and Hasselblad cameras
• Small and lightweight

• Power Camera from D-Tap Battery
• D-Tap to USB-C Connectors
• 40cm Braided Cable Length
• Built-In Current Regulator
• Two-Way Cable can Power Battery
• Comes in Raven Black Colour

• Coiled DC Power Cable
• 1.35/3.5mm Battery Plate DC Connector
• 2.1/5.5mm Camera/Accessory DC Connector
• Right-Angle Connectors on Both Ends

• Powers Cameras via USB-C PD
• Charges Gold/V-Mount Batteries via D-Tap
• Supports 5, 9, and 12V PD Voltage
• Nylon Braided Cable

• Compact & Lightweight
• Intelligent BMS Chip
• Various Interfaces for Wide Compatibility
• Practical OLED Display
• Premium Li-Battery

• Compact, lightweight, all-in-one
• Supports multiple camera models
• Tool-free installation
• Arca-Swiss quick-release plate
• A 90° rotatable structure
• Folding design for convenient storage

• Supports 100W (Max.) fast charging
• BMS intelligent chip
• Highly integrated design
• Aluminium alloy and fireproof PC
• Durable, scratch-resistant cover
• TFT color screen

• Compact & Lightweight
• Intelligent BMS Chip
• Various Interfaces for Wide Compatibility
• Practical OLED Display
• Premium Li-Battery

• Universal V-Mount Battery Plate
• 15mm LWS Rod Clamp
• 2 x 14.8V D-Tap Outputs
• 1 x 5V USB-C | 1 x 60W USB-C PD Output
• Aluminium & Stainless Steel Construction

• Continuous power supply
• Simple design; easy to use
• Upgraded chip features full decoding
• Short-circuit protection
• Fire-resistant PVC and ABS

• Power Your Gear with a V-Mount Battery
• 14.8 D-Tap & 5V/2A USB Outputs
• 1 x 8 VDC & 2 x 12 VDC Barrel Outputs
• 15mm LWS Rod Clamp on Bottom

• Continuous power supply
• Upgraded chip, featuring full decoding
• Same size as original LP-E6NH battery
• Fire-resistant PVC and ABS

• Mount a V-Mount Battery on 15mm Rods
• Lightweight Aluminium V-Lock Plate
• Adjustable Extension Arm, 15mm Rod Clamp
• 1/4"-20, M3, M4 & ARRI-Style Threads
• Quick Release Locking Mount

• Mount V-Mount Battery on a Rig
• Lightweight V-Lock Plate
• 1/4"-20 & M4 Mounting Threads
• Durable Aluminium Construction

• Mount V-Mount Battery on a Belt/Strap
• Lightweight V-Lock Plate
• Clip Features Anti-Slip Design
• 1/4"-20 & M4 Mounting Threads
• Aluminium & Stainless Steel Construction

• Male D-Tap to L-Series Dummy Battery
• Coiled Cable
• Power Gear or Camera with D-Tap Source

• Power DJI Video Transmitter via Battery
• V-Mount Battery Plate
• V-Mount Camera-Side Mounting Plate
• Plates Mount Directly on Transmitter
• Powers Both Camera & Transmitter
• Durable Aluminium Construction

• Converts a Single D-Tap Output to Four
• Up to 10A Maximum Draw
• Coiled Cable is 120cm Fully Extended

• Charge 4 Batteries Simultaneously.
• 2.5A Charging Current per Bay32.
• 4-Pin XLR Output.
• LED Charging Indicators.
• Compact Vertical Design.

• Power RED RAPTOR DSMC2/3 with Battery
• Right-Angle D-Tap to 6-Pin LEMO
• Works with Gold or V-Mount Batteries
• 20" Total Length

• For Powering Monitor, Light, Accessory
• D-Tap to 5.5 x 2.1mm DC Barrel
• Barrel Lock Prevents Disconnection
• Coiled Cable, 40 cm to 127 cm in Length
• Right-Angle Connectors on Both Ends

• Power Select Cameras & Accessories
• 2-Pin to 2-Pin LEMO-Type Male Connectors
• 18" Cable Length
• Standard ARRI-Style Wiring

• Lithium Polymer Battery 400mAh
• Velcro Hook Tape
• Spatula Tool to Remove Battery
• Phillips Screwdriver
• SYNC E Accessories
• Access to Detailed Video Tutorial

• Compatible with Panasonic GH4, GH5, and GH5S
• Regulated Voltage
• Steel, Copper, Rubber and Plastic Construction

• Charges up to 3 Batteries Simultaneously
• USB Type-C Port
• LED Indicators
• Charges Batteries in 90 Minutes

• Attaches Directly to the Camera
• No Extra Cabling Required

• International socket adapters
• Supplies AC power to Video Assist
• Recharges the dual LP-E6 batteries

• Charge Select Li-Ion Batteries from USB
• Output Range: 3.6 to 4.2V, 700mA
• Includes 9 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Powers Cameras via USB-C PD
• Charges Gold/V-Mount Batteries via D-Tap
• Supports 5, 9, and 12V PD Voltage
• Nylon Braided Cable

• Male D-Tap to L-Series Dummy Battery
• Braided 40 cm to 90 cm Coiled Cable
• 12 to 17 VDC Input, Regulated 8V Output
• Power Gear or Camera with D-Tap Source

• 76cm Cable Length
• Straight Cable

• Power Camera from D-Tap Battery
• D-Tap to USB-C Connectors
• 16" Braided Cable Length
• Built-In Current Regulator

• 70Wh, 14.8V V-Mount Battery Pack
• 8A Draw, 12-Hour+ Runtime
• Quick Release Top Plate, 1/4"-20 Threads
• USB and D-Tap Output Ports
• Runtime LCD

• Adapts V-Mount V-RAPTOR to V-Mount
• For Micro & Full-Size Batteries
• 2 x D-Tap Output Ports
• 3.8A E-Fuse with Reset Button
• Camera Stays Running If Voltage Exceeded
• Durable Anodised Aluminium Build

• Power Monitor, Light, Accessory
• D-Tap 5.5 x 2.5mm to DC Barrel
• Coiled Cable, 40 to 127 cm in Length
• Right-Angle Connectors

• Power BMPCC 6K/4K with Battery
• Extends 40 to 127 cm in Length
• Works with Gold Mount or V-Mount Battery
• Blue Colour

• Power BMPCC 6K/4K with Battery
• 1.2 m in Length
• Works with Gold Mount or V-Mount Battery
• Blue Colour

• Power Select Cameras and Devices

• Standard V-mount
• PD protocol compatible
• USB-C input/output
• D-Tap and DC power port
• Mounts to 15mm LWS rod system

• For Canon BP-945
• Compatible with LC-D421

• 12A Max Load Continuous on Battery
• 4-Stage LED Gauge
• Camera Communication with Cycle Count
• 5V/3Amp USB for Powering/Charging Mobile Devices
• D-Tap Port
• Hibernation & Storage Modes

• For Tilta Universal Battery Plate
• Dummy Battery to D-Tap
• For Select Canon Cameras
• For Select Other Devices
• 15" / 38 cm Length

• For Teradek Bolt, Z-CAM, Select RED
• For Select ARRI, Paralink, Other Systems
• Extends to 50 cm in Length
• Works with D-Tap Source
• Unregulated

• Compatible with select Canon
• Regulated Voltage
• Durable Construction

• Right-Angle USB-C Input Connector
• Right-Angle DC Barrel Output Connector
• 11.8 to 12.2V Voltage Range
• Five DC Adapters Included
• Cable Tie Mounts, Hook-and-Loop Strap
• Max 3A Current, 30W Power Constant

• Connect D-Tap Source to a Panasonic Lumix Camera
• D-Tap to Dummy Battery Connectivity
• 40 cm Contracted Length
• Input Voltage: 12-17V
• Output Voltage: 8V (Regulated)

• Power Select Cameras, Monitors, Lights
• Connect to Batteries/Other D-Tap Sources
• 40 - 90 cm Braided Blue Coiled Cable
• 12 to 17V Input / Regulated 8 VDC Output

• 7.3V, 1900mAh Capacity Li-Ion Battery
• Communicates Remaining Minutes to LCD

• Mounting solution for V-mount batteries
• Tool-free installation
• Built-in 1/4"-20 threaded hole

• Fully compatible with NP-F batteries
• Aluminium alloy/ gold-plated electrical contacts
• Allows to access two devices
• Supports bi-directional input and output
• Comes with USB-C mode

• Connects to SmallRig NP-F Battery Plate
• 5.5/2.1mm DC Power to LP-E6 Dummy Battery
• For Selected Canon and Other Devices
• 60cm-Long Cable

• 1/4"-20, ARRI 3/8"-16 threaded holes
• Dual cold shoe ports
• Rotating-Axes structure. Angles Adjustable
• Quick Release And Safe Installation

• Standard V-mount
• PD protocol compatible USB-C input/output
• Supports Φ15-40mm rod
• 1/4"-20 threaded holes

• Holds 2 AA Batteries
• Easy Battery Exchange

• Provides Long Battery Life for Compatible Sony Cameras

• V-Mount Battery Distribution Box
• Fits Between Battery & Camera Mount
• 2x 2-Pin LEMO-Compatbile Outputs
• 2x D-Tap Outputs
• 5V USB Output

• For Blackmagic Pocket Cinema Camera 4K.
• 2.5mm Male DC Barrel Connector.
• Right-Angle DC Plug.
• 2-Pin Camera Power Connector.
• Cable Length: 17.2".

• 2 x 147Wh Li-Ion V-Mount Batteries
• GPM-X2S Dual-Battery Mini Charger
• 14.8V Output, 5.9-Hour Runtime
• D-Tap Output/Input, USB Type-A Output
• Ultracompact Design

• IDX V-Mount
• 12V power
• D-Tap connectors

• Replaces Original RS 3/RS 3 Pro Sled
• Works with Separate Battery Plate
• Passes Power Through to Multiple Outputs
• 2 x 2-Pin LEMO-Type Input/Outputs
• 2 x D-Tap Outputs
• Manfrotto-Style Mounting Receiver

• For Sony NP-FZ100-Powered Devices
• USB Type-C to Dummy Battery, 24" Cable
• Regulated 8-8.4V, 3.5A Max Output
• Transmits Status Data to Camera

• For Powering Monitor, Light, Accessory
• D-Tap to 5.5 x 2.5mm DC Barrel
• Barrel Lock Prevents Disconnection
• Coiled Cable, 16 to 50" in Length
• Right-Angle Connectors on Both Ends

• Continuously power your camera with USB-C battery packs or AC wall power
• No need to purchase multiple camera batteries
• Run two batteries simultaneously for longer runtime and no downtime
• Can be adapted for use with D-Tap batteries
• Easy mounting options with integrated silicon strap and 1/4"-20 mount

• Mounts to Back of Monitor
• Powers Monitor

• Charges up to 3 Batteries
• Individual Battery Indicators
• Micro USB Connection
• Designed for Zhiyun 18650 Batteries

• Replacement for Panasonic DMW-BCM13E
• Rechargeable Lithium-Ion Battery
• Capacity: 3.6V, 1150mAh

• Power camera using any V or Gold-mount battery
• With a D-tap plug
• For Select Canon cameras

• For Use with Sony FX9 and FX6
• 1 x D-Tap Male Connector
• 1 x Right-Angle DC Male Connector
• Coiled Cable Extends from 35 to 60cm
• Ultra-Durable & Nylon-Braided Cable

• Connect D-Tap Sources to Your Sony Camera
• D-Tap to Dummy Battery Connectivity
• 40 cm Contracted Length; 90 cm Extended Length
• Input Voltage: 12V - 17V; Output Voltage: 8V (Regulated)
• Output Current: 2A

• Coiled Cable, 40 to 80cm in Length
• D-Tap 5.5 x 2.5mm to DC Barrel
• For Canon C70 and Select Monitors
• Also Powers Lights and Accessories
• Right-Angle Connectors

Connect D-Tap Sources to Your Device D-Tap to 4-Pin XLR Female Connectivity Coiled Cable, Right-Angle Connectors Extends from 50 to 127 cm in Length

• Power BMPCC 6K/4K with Battery
• 1.2 m in Length
• Works with Gold Mount or V-Mount Battery
• Black Colour

• 8V Regulated Output

• 47Wh, 14.8V, Lithium-Ion V-Mount Battery
• Coiled D-Tap to 2-Pin Cable
• D-Tap Wall Charger, 8A Continuous Draw
• Quick Release Plate with 1/4"-20 Screw
• 2 D-Tap & 2 USB Outputs
• Battery Charges with D-Tap Charger

• 7.2 VDC, 6300mAh Li-Ion Battery Pack
• For L-Series Camera, Light, or Accessory
• 7A Maximum Load
• 4-LED Power Gauge

• For BMPCC 6K & 4K
• 2.5mm Male DC Barrel Connector
• 2-Pin Camera Power Connector
• Cable Length: 35.5cm

• Sony NP-F970 Type
• 7,800 mAh

• Sony NP-F750 Type
• 5,200mAh

• Power Ultra 5 Series Monitor via Battery
• Overload Protected, Digital E-Fuse
• 2 x D-Tap 11-17V Outputs for Accessories
• Fits Standard & Micro V-Mount Battery
• Captive Mounting Screws Included

• For Sony a9, a7 III, and a7R III Cameras
• Sony NP-FZ100 Dummy Battery
• 5.5/2.1mm DC Female Connector
• 17" / 43.82 cm Cable Length

• Compact & Lightweight
• Intelligent BMS Chip
• Various Interfaces for Wide Compatibility
• Practical OLED Display
• Premium Li-Battery

• For Panasonic Lumix S1/S1H/S1R Cameras
• 1.35/3.5mm DC to Dummy Battery Cable
• Compatible with KB Battery Plate DC Port
• 12 to 17V Input, 8V 2A Regulated Output
• Coiled 40.6 to 91.4cm Cable

• Possibly the smallest style pack on the market today.
• 10A Max Load
• 4-stage LED gauge
• Camera Communication with Cycle Count
• 5V/3Amp USB for powering/charging mobile devices
• D-Tap Port

• Compatible with NP-F type batteries
• Aluminium alloy and gold-plated contacts
• Allows to access two devices
• Automatic wake-up and sleep modes
• USB-C mode and power indicators

• All-in-one design
• Lightweight, compact, modular design
• Bottom adopts a tensile structure
• Built-in Manfrotto 501 quick-release plate
• Comes with a 15mm rod clamp

• Continuous power supply
• Upgraded chip, featuring full decoding
• Same size as original NP-FZ100 battery
• Fire-resistant PVC and ABS

• Converts a Single D-Tap Output to Four
• Up to 10A Maximum Draw
• 24" Straight Cable

• For Blackmagic Pocket Cinema Camera 4K
• 1m Length Fully Extended

• Compatible with L-Series Gear
• 3500mAh / 26Wh Capacity
• 5A Continuous Current, 7.4V Power Output
• For Lights, Transmitters, Monitors
• Current, Voltage, Temperature Protection

• Expandable Capacity
• Power Pretty Much Anything (3600W-7200W Output)
• World's Fastest Charging (MultiCharge 6000W)

• Compatible with Sony a9 and a7r
• Regulated Voltage
• Durable Construction

• USB Dual Charger with Cable
• Replacement for Sony NP-FW50
• Rechargeable Lithium-Ion Battery
• Capacity: 7.4V, 1030mAh

• Coiled Cable Stays Neat
• Extends from 39 to 100cm

• Power BMPCC 6K/4K with Battery
• 50.8cm in Length
• Works with Gold Mount or V-Mount Battery
• Blue Colour

• 1 x Male D-Tap Connector Cable
• 1 x 12V Regulated, 3 x 14.8V D-Tap Ports
• 1 x 1/4"-20 Mounting Thread
• Nylon Braided Cable Measures 16"
• LED Power Status Indicator

• Power BMPCC 6K/4K with Battery
• Extends 40.64 to 127cm in Length
• Works with Gold Mount or V-Mount Battery
• Blue Colour

• Compact, lightweight, all-in-one mounting solution
• Supports different cameras in various scenarios
• Toolless installation and quick release
• Arca-Swiss quick-release plate
• 90° rotation

• For Powering Monitor, Light, Accessory
• D-Tap to Locking 2.5mm DC Barrel
• Barrel Lock Prevents Disconnection
• Coiled Cable, 0.3 to 1m Length
• Right-Angle Connectors on Both Ends
• Black Colour

• 14.8 VDC, 98Wh, 6600mAh Battery Pack
• For EOS C200, C300 Mark II, C500 Mark II
• 1 x D-Tap and 1 x USB Port
• D-Tap Supports SMBUS Communication
• 4-LED Power Gauge

• Compatible with NP-F type batteries
• Aluminium alloy and gold-plated contacts
• Allows to access two devices
• Features automatic wake-up and sleep modes
• USB-C mode and power indicators

• Power 6K/6K Pro with 2 x NP-F570 Batteries
• Adds up to 3+ Hours of Shooting Time
• Charges Batteries with 12V Camera Input
• Creates Grip on Bottom of Camera
• Lightweight Carbon Fibre Design

• 1 x Male D-Tap Connector Cable
• 1 x 12V Regulated, 3 x 14.8V D-Tap Ports
• Anti-Twist 1/4"-20 Mounting Threads
• Voltmeter LED Power Status Indicator
• Nylon Braided Cable Measures 16"
• Durable Aluminium Construction

• For Nikon EN-EL15-Powered Devices
• USB Type-C to Dummy Battery
• Straight Cable

• Exclusively for SWIT batteries
• SONY&RED power info display
• Provide 2x D-tap sockets
• Slim and light weight, balanced install
• Multiple protection circuit

• USB, 7.2 / 12 VDC Barrel, D-Tap Outputs
• USB to DC Barrel Cable
• 7.2 and 12 VDC Barrel Cables
• LP-E6 Dummy Battery Adapter Cable
• 15mm LWS Rod Clamp
• Cheese Plate on Rear

• Power Camera from D-Tap Battery
• D-Tap to USB-C Connectors
• 16" Braided Cable Length
• Built-In Current Regulator
• Two-Way Cable can Power Battery
• Comes in Cardinal Red Colour

• Replacement for Sony NP-F970 Battery
• 7.2V Output, 7400mAh Capacity
• Memory-Free Lithium-Ion Cells

• Charge Select Li-Ion Batteries from USB
• Output Range: 7.2 to 8.4V, 700mA
• Includes 11 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Dual Slot Battery Charger
• Compatible with Multiple Sony Battery Models
• Unique Cooling Fins Design
• Safety Features

• Charge Select Li-Ion Batteries from USB
• Output Range: 7.2 to 8.4V, 700mA
• Includes 11 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port

• Cable Terminates in 4-Pin XLR Connector
• Requires Separate IEC Cable

• Connects SeeMo Pro to V-Mount Battery
• Reliable and Efficient Power Supply
• 1m Length for Flexible Setups
• Optimised Performance

• Made for International Outlets.
• 220V Power Output.
• 2 x AC Outputs | 4 x 2.1A USB Ports.
• Compatible with ONsite D-Tap Battery.
• Portable Design.

• Coiled Cable, 30 to 60cm in Length
• D-Tap to 4-Pin Locking Barrel
• Compatible with Portkeys BM5/HH7/HS7T
• Reverse Polarity Protection

• For Powering Multiple Wireless Receivers/Ultralight 2
• 4 x Female D-Tap and 1 x Male D-Tap Connectors

• Attaches to Rear of FX6 Camera
• Supports V-Mount Battery
• Access to BP-U Battery Allows Hot Swaps
• 3 x D-Tap Ports, Protective Digital Fuse

• Rechargeable lithium-ion
• For Sony NP-FV100
• Longer battery life
• No memory effect
• Rated at 8.4V and 3900mAh

• For Powering Monitor, Light, Accessory
• D-Tap to Locking 2.5mm DC Barrel
• Barrel Lock Prevents Disconnection
• Straight Cable, 1m Length
• Right-Angle Connectors on Both Ends
• Black Colour

• Power Camera and Accessories
• V-Mount Battery Plate
• 14.8V 2-pin LEMO-Type Output
• 14.8V 3-Pin Fischer, 5 x D-Tap Outputs
• 1 x BNC SDI Input, 2 x BNC SDI Outputs