Rig Components

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Works with WC Unified Baseplate Systems
• Dovetail Top & Shoulder Pad Bottom
• Two ARRI Rosettes for Handgrips
• Multiple 1/4"-20 & ARRI Accessory Mounts
• Lightweight Aluminium Composition

• Accepts V-Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• 2.7kg load capacity
• Ready to use in seconds
• Move around freely
• No knobs or buttons

• Supports V-Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• For RED KOMODO Camera
• Onboard Monitor Hinge
• Arca-Swiss Style Top Handle
• Arca-Swiss Style Top Plate
• Arca-Swiss Style Top Mount

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• Adjustable-Height Baseplate/Riser
• Supports 15mm Accessory Rods
• 3 Sets of Riser Posts Included
• Works Lengthwise or Widthwise
• Compatible with ARRI-Style Baseplates

• 12" Long Sliding Bridge Plate Support
• Safety Catches Add Security at Ends
• 3/8"-16 & 1/4"-20 Mounting Threads
• Native Support for Oconnor Heads
• Attaches to Tripod Quick Release Plate
• Durable Aluminium Construction

• Designed for Canon C70 Camera
• 15mm LWS Rod Baseplate Support/Riser
• Quick Release Arca-Type Dovetail Plate
• 2 x ARRI Rosettes for Optional Handgrips
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• Vertical Lens Support Post Adapter Port

• Built-in NATO rails
• Cold Shoe Safety Pin
• HDMI & USB C Cable Clamp
• Multiple Points of Contact
• Over 30+ Threaded Holes
• Perfect Balance

• Dedicated Full Camera Cage
• NATO-Mount Top Handle, LANC Start/Stop
• Universal ARRI/501 Baseplate System
• 2 x 8" Aluminium 15mm Rods

• Formfitting Cine-Style Cage
• Top Handle with Run/Stop Trigger
• Sensor Plane Marker, 3 NATO Rails
• Reversible, Modular Handle Design

• Formfitting Cine-Style Cage
• Top Handle with Run/Stop Trigger
• Sensor Plane Marker, 3 NATO Rails
• Reversible, Modular Handle Design

• Form-Fitted for Panasonic G9 II
• Built-In NATO Rails
• Integrated HDMI & USB-C Cable Clamp
• Top Handle Included
• Retains Access to All Camera Functions
• Cold Shoe Safety Pin

• Form-Fitted for Panasonic G9 II
• Built-In NATO Rails
• Integrated HDMI & USB-C Cable Clamp
• Top Handle Included
• Retains Access to All Camera Functions
• Cold Shoe Safety Pin

• Formfitting Cine-Style Cage
• Top Handle for SanDisk PRO-BLADE SSD Mag
• Easy-to-Mount Swing-Away Hatch Design
• Maintains Access to Ports & Controls

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Formfitting Cine-Style Cage
• Top Handle for SanDisk PRO-BLADE SSD Mag
• Easy-to-Mount Swing-Away Hatch Design
• Maintains Access to Ports & Controls

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Mounts & Adjusts Viewfinder On Rig
• Viewfinder Mounting Bracket Included
• Adapter for Alphatron & SmallHD Included
• 4" NATO Rail w/ Standard-Size Dimensions
• Safety Pin Prevents Accidental Removal

• Supports Power Plate & On Board Recorder
• Multiple Hole Patterns
• Includes L-Bracket
• Dual Rosette Mounts

• For Sony Venice, F55, F5
• Pass-through lightweight 15mm rod support

• Ultra-lightweigh textension for the EVF mount
• Extends from 26 cm to 37 cm
• Friction knuckle allows for quick tilting
• Tool-less design

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• ARRI Standard Mounting Plate
• Safety Catches on Each End
• Fits OConnor 2060, 2575, 120EX
• Fits Sachtler Cine 30
• Attaches to Most Tripods Head via Screws

• Replaces original viewfinder mount system
• Three points of adjustment
• Tool-less design
• NATO arm length of approx. 12.7 cm

• 15mm studio offset spacing
• Convert from RED to ARRI standard height
• Compatible with any rig
• Rubberised top coating
• Slotted design

• Ultra-lightweight extension
• For AIR EVF Mount
• Extends from 26 to 37 cm
• Allows quick tilting
• Tool-less design

• Supports Gold Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• ARRI-Standard Bridgeplate
• 19mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• ARRI-Standard Bridgeplate
• 15mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• For RED KOMODO Camera
• 15mm LWS Rod Support/Riser
• ARRI Rosettes for Optional Handgrips
• Lens Adapter Support Bracket
• Thumb-Lever Locks

• Formfitting Cage with ARRI Side Rosettes
• NATO Mount Powered Trigger Top Handle
• Left, Right, and Top NATO Rails
• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1/4"-20 and 3/8"-16 Tripod Threads
• Front Threads for Optional Lens Support

• Relocate & Extend Sony FX6 Handgrip
• Mounts Using ARRI-Standard Rosette
• Telescoping Extension & 360°: Rotation
• Push-Button Angle Adjustment
• Arm Extends 5.6" Folded to 11" Maximum

• For Sony F5/F55
• Three points of adjustment
• Tool-less design
• Quick installation

• Built-In Bluetooth & WiFi
• Aluminium & Oak handle
• 3 Customised Band Switches
• Focus Wheel, Record Switch
• Nine-Way Joystick

• Arca-Swiss compatible baseplate.
• Easy adjustability.

• Composed of 2 Handles
• Individual Rotation Angle - 360°
• Composite Camera Support via Rod Block
• Anodised Aluminium Rod Block
• Supports 15 mm Rods

• Left handgrip with ARRI rosettes and black Push-button
• Arm features 3 points of articulation
• Patented Push-button technology
• Push, adjust, release, and then its lock
• Ergonomic handle with rubber handgrips for stability and precision
• Stainless steel locking mechanism for durability
• Designed with (2) ¼-20 and (2) 3/8-16 threaded holes with locking attachment stoppers
• Made of CNC machined aluminum for resistance

• Adjustable Mounting Arm for FS7 Monitor
• Four Points of Adjustment
• Three Red Tension Levers
• Rosette Mount for Monitor Attachment
• FS7 Rod Lock for Mounting on Camera

• For 15mm LWS & 15mm Studio Rods
• Locks via Built-In Tightening Screw
• Snap-On Design
• Fast & Simple Setup
• Stable, Solid & Durable

• Most adjustable ENG style mount
• For Sony FS5 monitor
• Gives you full 360º motion
• Four adjustment points.

• Attaches to Top Plate for FS7
• Three Points of Adjustment
• 5" of Travel with Safety Catch
• Spring-Loaded Locking Lever

• 15 mm Rod Baseplate for Sony FS7
• Maintains FS7's Shoulder-Mount Design
• ARRI Rosettes for Attaching Handles
• V-Lock Adapter Plate Included
• 1/4"-20 and 3/8"-16 Camera Screws

• Extendable Arm to Install Canon C200 Side Hand Grip
• Easy Access to Controls on the Side Hand Grip
• SHAPE Push Button with 360-Degree Rotation
• Knob Screw to adjust Length of Extendable Arm
• Adjustment Length up to 5 cm (2")

• 15 mm Rod Baseplate
• Top Plate with 1/4"-20 & 3/8"-16 Threads
• Maintains FS7's Shoulder-Mount Design
• ARRI Rosettes for Attaching Handles
• V-Lock Adapter Plate Included