Camera Rigs & Support

• Track and film effortlessly in real-time
• Advanced motion capture device
• Film without a camera operator
• Track up to 16 people simultaneously

• Hatch System Quick-Load Cage
• NATO Rails on All Sides
• 60-Tooth ARRI-Style Rosette
• Top Handle Included
• Cine Cap Included
• Multiple Mounting Holes

• Hatch System Quick-Load Cage
• NATO Rails on All Sides
• 60-Tooth ARRI-Style Rosette
• Top Handle Included
• Cine Cap Included
• Multiple Mounting Holes

• Wireless Programmable Motorised Slider.
• Robust 1.19m Portable Travel Slider.
• Carbon Fiber Rails.
• Supports up to 5kg.

Dual-Length Slider with Movable Rails, 1.3' with 15 lb Payload Tripod Mounted, 0.7' with 50 lb Payload Surface Mounted, Lockable Fold-Out Legs

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Works with WC Unified Baseplate Systems
• Dovetail Top & Shoulder Pad Bottom
• Two ARRI Rosettes for Handgrips
• Multiple 1/4"-20 & ARRI Accessory Mounts
• Lightweight Aluminium Composition

• Accepts V-Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• Short Track for Magic Carpet System
• Lightweight Carbon Fiber Construction
• Use with Carriage & End Caps
• Supports Loads up to 5 kg
• Brake and Bubble Level on Carriage

• 1 x Tally Box, 4 x Tally Lamps
• 200m Wireless Transmission
• GPIO, USB, RS-232/485 Interfaces
• Compatible with vMix and Switchers
• Front and Rear Lamp Indicators

• Formfitting Aluminium Full Camera Cage
• Pro Features

• 2.7kg load capacity
• Ready to use in seconds
• Move around freely
• No knobs or buttons

• Supports V-Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• For RED KOMODO Camera
• Onboard Monitor Hinge
• Arca-Swiss Style Top Handle
• Arca-Swiss Style Top Plate
• Arca-Swiss Style Top Mount

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• Adjustable-Height Baseplate/Riser
• Supports 15mm Accessory Rods
• 3 Sets of Riser Posts Included
• Works Lengthwise or Widthwise
• Compatible with ARRI-Style Baseplates

• Blackmagic Pocket Cinema Camera 6K Pro
• 1/4"-20 & ARRI-Style 3/8"-16 Threads
• Accommodates Battery Grip
• Bottom Compatible with KB Bridge Plate
• Top & 2 Side NATO Rails on Cage
• Sensor-Plane Markers, 2 Shoe Mounts

• 12" Long Sliding Bridge Plate Support
• Safety Catches Add Security at Ends
• 3/8"-16 & 1/4"-20 Mounting Threads
• Native Support for Oconnor Heads
• Attaches to Tripod Quick Release Plate
• Durable Aluminium Construction

• 16m Quiet Motorised Sliding Range.
• Supports Cameras up to 13.6kg.
• Programmable Shooting Modes.
• Straight, Parallax, or 120° Panning.

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• ARRI Standard Mounting Plate
• Safety Catches on Each End
• Fits OConnor 2060, 2575, 120EX
• Fits Sachtler Cine 30
• Attaches to Most Tripods Head via Screws

• Supports Gold Mount Battery
• Mounts onto Optional 15mm LWS Rods
• Power Camera with 2-Pin LEMO-Type Cable
• Can Hot Swap with Camera Battery
• Provides 14V Power to Camera

• Ultra-lightweigh textension for the EVF mount
• Extends from 26 cm to 37 cm
• Friction knuckle allows for quick tilting
• Tool-less design

• For Sony Venice, F55, F5
• Pass-through lightweight 15mm rod support

• Replaces original viewfinder mount system
• Three points of adjustment
• Tool-less design
• NATO arm length of approx. 12.7 cm

• Ultra-lightweight extension
• For AIR EVF Mount
• Extends from 26 to 37 cm
• Allows quick tilting
• Tool-less design

• 15mm studio offset spacing
• Convert from RED to ARRI standard height
• Compatible with any rig
• Rubberised top coating
• Slotted design

• For Large DSLR Camera Bodies
• Leaves Camera Grip Open
• Manfrotto Standard Quick Release
• Built-In HDMI Cable Clamp
• Lens Adapter Support

• Holds 50' of K-Flex Track
• Cordura Exterior
• Side Grab Handles

• Formfitting Cage with ARRI Side Rosettes
• NATO Mount Powered Trigger Top Handle
• Left, Right, and Top NATO Rails
• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1/4"-20 and 3/8"-16 Tripod Threads
• Front Threads for Optional Lens Support

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• Supports Power Plate & On Board Recorder
• Multiple Hole Patterns
• Includes L-Bracket
• Dual Rosette Mounts

• Mounts & Adjusts Viewfinder On Rig
• Viewfinder Mounting Bracket Included
• Adapter for Alphatron & SmallHD Included
• 4" NATO Rail w/ Standard-Size Dimensions
• Safety Pin Prevents Accidental Removal

• Designed for Canon C70 Camera
• 15mm LWS Rod Baseplate Support/Riser
• Quick Release Arca-Type Dovetail Plate
• 2 x ARRI Rosettes for Optional Handgrips
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• Vertical Lens Support Post Adapter Port

• For RED KOMODO Camera
• 15mm LWS Rod Support/Riser
• ARRI Rosettes for Optional Handgrips
• Lens Adapter Support Bracket
• Thumb-Lever Locks

• ARRI-Standard Bridgeplate
• 15mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• ARRI-Standard Bridgeplate
• 19mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• Form-Fitted for Panasonic G9 II
• Built-In NATO Rails
• Integrated HDMI & USB-C Cable Clamp
• Top Handle Included
• Retains Access to All Camera Functions
• Cold Shoe Safety Pin

• Form-Fitted for Panasonic G9 II
• Built-In NATO Rails
• Integrated HDMI & USB-C Cable Clamp
• Top Handle Included
• Retains Access to All Camera Functions
• Cold Shoe Safety Pin

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Formfitting Cine-Style Cage
• Top Handle for SanDisk PRO-BLADE SSD Mag
• Easy-to-Mount Swing-Away Hatch Design
• Maintains Access to Ports & Controls

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts