Camera Rigs & Support

• Track and film effortlessly in real-time
• Advanced motion capture device
• Film without a camera operator
• Track up to 16 people simultaneously

• Wireless Programmable Motorised Slider.
• Robust 1.19m Portable Travel Slider.
• Carbon Fiber Rails.
• Supports up to 5kg.

• Wireless Programmable Motorised Slider.
• Robust 0.78m Portable Travel Slider.
• Carbon Fibre Rails.
• Supports up to 2.5kg.

• Add Handgrips to Your Rig
• Left and Right Rosette Rubber Handgrips
• Left and Right Rosette Extension Arms
• 15mm Rod Block with Dual Rosettes

• Works with WC Unified Baseplate Systems
• Dovetail Top & Shoulder Pad Bottom
• Two ARRI Rosettes for Handgrips
• Multiple 1/4"-20 & ARRI Accessory Mounts
• Lightweight Aluminium Composition

• For Ronin 4D 4-Axis Cinema Camera 6K/8K
• For DJI High-Bright Remote Monitor
• Focus Wheel with Electromagnetic Damping
• Precision Gimbal Control
• Run/Stop Function

• 1/4-20 threaded hole on the bottom
• LPL Cap included to prevent dust from entering sensor area when lens is not attached

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• Short Track for Magic Carpet System
• Lightweight Carbon Fiber Construction
• Use with Carriage & End Caps
• Supports Loads up to 5 kg
• Brake and Bubble Level on Carriage

• Protect the camera body
• Easy-to-install V-mount battery
• Top Handle easy to disassemble
• Ergonomic carbon fibre side handle
• Monitor mount supports 180 ° pitch
• 360 ° panning adjustment

• 1 x Tally Box, 4 x Tally Lamps
• 200m Wireless Transmission
• GPIO, USB, RS-232/485 Interfaces
• Compatible with vMix and Switchers
• Front and Rear Lamp Indicators

• 2.7kg load capacity
• Ready to use in seconds
• Move around freely
• No knobs or buttons

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• Adjustable-Height Baseplate/Riser
• Supports 15mm Accessory Rods
• 3 Sets of Riser Posts Included
• Works Lengthwise or Widthwise
• Compatible with ARRI-Style Baseplates

• Blackmagic Pocket Cinema Camera 6K Pro
• 1/4"-20 & ARRI-Style 3/8"-16 Threads
• Accommodates Battery Grip
• Bottom Compatible with KB Bridge Plate
• Top & 2 Side NATO Rails on Cage
• Sensor-Plane Markers, 2 Shoe Mounts

• 12" Long Sliding Bridge Plate Support
• Safety Catches Add Security at Ends
• 3/8"-16 & 1/4"-20 Mounting Threads
• Native Support for Oconnor Heads
• Attaches to Tripod Quick Release Plate
• Durable Aluminium Construction

• Dedicated Full Camera Cage
• Universal LWS Side-Load Baseplate System
• ARRI/501 Quick Release Plate, Lens Cap
• NATO-Mount LANC Top Handle
• 2 x Standard 12" 15mm Rods

• 15mm Rod Support / Correct Lens Height
• Vertical Rod Port (Lens Adapter Support)
• Two Quick Release Options
• Use with Bridgeplates, Gimbals, Etc.
• Centre Camera Slot for Multiple Screws

• ARRI Standard Mounting Plate
• Safety Catches on Each End
• Fits OConnor 2060, 2575, 120EX
• Fits Sachtler Cine 30
• Attaches to Most Tripods Head via Screws

• Does not deform under tension
• 100 m in length
• For Syrp Slingshot
• Creates motion control time-lapses
• Does not stretch or crush

• Ultra-lightweigh textension for the EVF mount
• Extends from 26 cm to 37 cm
• Friction knuckle allows for quick tilting
• Tool-less design

• For Sony Venice, F55, F5
• Pass-through lightweight 15mm rod support

• Camera support package
• For Nikon D810 and D800
• Form-fitting cage
• Secure accessory attachment
• Integrated rod support

• Cage for Canon 5D Mark III/IV Cameras
• Slew of 1/4"-20 & 3/8"-16 Threaded Holes
• Wood Top Handle with 15mm Rod Clamp
• Leaves Camera Grip Unobstructed
• Manfrotto Standard Quick Release

• For RED weapon cameras
• Arrays of 1/4-20 holes
• 3/8-16 holes for large accessories
• ARRI standard accessory mount

• Cage for Sony a7/a9 Cameras
• Slew of 1/4"-20 & 3/8"-16 Threaded Holes
• Wood Top Handle with 15mm Rod Clamp
• Leaves Camera Grip Unobstructed
• Manfrotto Standard Quick Release

• Cage for Panasonic GH5 Camera
• Slew of 1/4"-20 & 3/8"-16 Threaded Holes
• Wood Top Handle with 15mm Rod Clamp
• Leaves Camera Grip Unobstructed
• Manfrotto Standard Quick Release

• Camera support package
• For Nikon D7500 and D5600
• Form-fitting cage
• Secure accessory attachment

• Ultra-lightweight extension
• For AIR EVF Mount
• Extends from 26 to 37 cm
• Allows quick tilting
• Tool-less design

• 15mm studio offset spacing
• Convert from RED to ARRI standard height
• Compatible with any rig
• Rubberised top coating
• Slotted design

• Holds 50' of K-Flex Track
• Cordura Exterior
• Side Grab Handles

• Replaces Original FX6 Monitor Bracket
• Adds Durable & Adjustable Support
• 15mm Rod Mount, NATO Rail
• 360° Rotation, Sony 8T Mount
• 3/8"-16 Mounting Thread, Drag Adjustment
• Mounts onto Sony FX6 Top Handle

• Designed for Canon C70 Camera
• 15mm LWS Rod Baseplate Support/Riser
• Quick Release Arca-Type Dovetail Plate
• 2 x ARRI Rosettes for Optional Handgrips
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• Vertical Lens Support Post Adapter Port

• For RED KOMODO Camera
• 15mm LWS Rod Support/Riser
• ARRI Rosettes for Optional Handgrips
• Lens Adapter Support Bracket
• Thumb-Lever Locks

• ARRI-Standard Bridgeplate
• 15mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• ARRI-Standard Bridgeplate
• 19mm Studio Rod Support
• Quick Release Plate, Safety Lever
• 2 x 3/8"-16 Mounting Screws
• Anti-Twist, Nonslip Rubber Surface

• Base Cage Kit for Panasonic S1
• 1/4"-20 & 3/8"-16 Threaded Holes
• Wood Top Handle with 15mm Rod Clamp
• Leaves Camera Grip Unobstructed
• Manfrotto Standard Quick Release

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Formfitting Cage for KOMODO & KOMODO-X
• Top Handle with Run/Stop Trigger
• 1 x 15mm Rod Clamp, 3 x NATO Rails
• 2 x ARRI-Style Rosettes, 2 x Shoe Mounts

• Modular Camera Cage Top Plates
• Trigger Top Handle
• Side Rod Clamp with NATO Rail
• Numerous Mounting Threads and Shoe Mount

• Blackmagic Pocket Cinema Camera 6K Pro
• 1/4"-20 & ARRI-Style 3/8"-16 Threads
• Accommodates Battery Grip
• Bottom Compatible with KB Bridge Plate
• Top & 2 Side NATO Rails on Cage
• Sensor-Plane Markers, 2 Shoe Mounts

• Formfitting Cage with Side Rosettes
• Top Handle with Start/Stop Control
• Universal Quick Release 501 Baseplate
• 2 x 12" Long 15mm Rods
• Modular Cage Design
• Top NATO & Left/Right NATO Safety Rails

• Formfitting Cage with Side Rosettes
• Top Handle with Start/Stop Control
• Universal Quick Release 501 Baseplate
• 2 x 12" Long 15mm Rods
• Modular Cage Design
• Top NATO & Left/Right NATO Safety Rails

• Modular Camera Cage for URSA Mini
• Remote Trigger on Top Handle
• Multiple 1/4"-20 and 3/8"-16 Threads
• LANC Control Port, Shoe Mounts
• Multiple NATO Rails, Side Rosette