Camera Rigs & Support

• Smooth Automatic Pan and Tilt Head
• 20 lb Maximum Load
• Use on Tripod or SliderPLUS PRO
• Manual or Smartphone App Control

• Attaches Two HeadONE Units Together
• Enables Both Pan and Tilt Motion
• 7 lb Capacity

• For the Edelkrone JibONE
• Protects Against Dust/Scratches/Impacts
• 2 x Interior Accessory Compartments
• Adjustable Shoulder Strap
• Built-In Hand Strap

Provides Stop-Motion Capability, Supports Shoot-Move-Shoot, Integrated Focus Adjustment Knob, Supports Dragonframe Software, USB Power

• Custom-Designed Soft Case
• Fits SliderPLUS Compact
• Zipper Closure
• Adjustable Shoulder Strap

• For Lenses with 25 to 110mm Diameter
• Standard 0.8 Mod / 32 Pitch Gearing
• Works with Most Follow Focuses

• For Select Stabilizers and Sliders
• Drives the Slide Motion
• Powers Head & Focus Modules
• Standalone Operation

• Battery Power for the HeadPLUS
• Single Gold Mount Battery Plate
• Two D-Tap Ports to Power Accessories

• For Mounting Camera Accessories
• Mount 19mm accessories

Dual-Length Slider with Movable Rails, 1.3' with 15 lb Payload Tripod Mounted, 0.7' with 50 lb Payload Surface Mounted, Lockable Fold-Out Legs

• Smooth, Automatic Pan and Tilt Head
• 9 kg Maximum Load
• Use on Tripod, SliderPLUS, DollyPLUS
• Manual or Smartphone App Control
• Record and Replay Motion

• For edelkrone Motion-Controlled Devices
• Control Devices without an App
• Wired up to 40 m, Wireless up to 25 m
• 3 x Programmable Buttons
• 3.5mm Link Connector for Wired Control

• NATO Standard Rail
• For Mounting NATO-Compatible Accessories
• Spring-Loaded Safety Stops on Each End

• Protective, Open-Style Camera Cage
• Keeps Camera Handgrip Accessible
• 1/4"-20 & 3/8"-16 Accessory Threads
• Right-Angle HDMI Adapter & HDMI Clamp
• ARRI-Style Anti-Twist Locating Holes

• For Canon LP-E6-Type Batteries.
• Uses 2 x Batteries in Parallel.
• For Slide Module v2.
• For HeadPLUS or HeadPLUS PRO.
• For DollyPLUS or DollyPLUS PRO.

• Attach Directly to Either Side of Camera
• NATO Rail for Accessories
• Spring-Loaded Security Pins
• 1/4"-20 and 3/8"-16 Threads

• Top Plate for Sony FX6
• Unified Baseplate with 15mm Rod Clamps
• 15mm Rod Pair, 15" Long
• 12" Long Safety Dovetail Plate
• V-Mount Battery Plate

• Cheese Plate Attaches to Top of Camera
• 1/4"-20 and 3/8"-16 Tapped Holes
• 3/8"-16 ARRI Accessory Mounts

• 4.5 to 6.7" Telescopic Extension Arm
• 2 x ARRI-Standard Rosettes
• Thumb-Lever Fasteners
• Use to Extend Separate Handgrip

• Top Plate for Sony FX6
• Unified Baseplate with 15mm Rod Clamps
• 15mm Rod Pair, 12" Long
• 8" Long Safety Dovetail Plate

• Works with WC Unified Baseplate Systems
• Dovetail Top & Shoulder Pad Bottom
• Two ARRI Rosettes for Handgrips
• Multiple 1/4"-20 & ARRI Accessory Mounts
• Lightweight Aluminium Composition

• For 19mm & 15mm Studio Offset Rods
• 3/8"-16 and 1/4"-20 Screws
• Y-Bracket with Rollers for DSLR Lenses
• Vertical & Horizontal Adjustments
• Small & Large Support Extensions

• 1/4-20 threaded hole on the bottom
• LPL Cap included to prevent dust from entering sensor area when lens is not attached

• Accepts V-Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

• Top Cheese Plate for Canon C70
• 1/4"-20 and 3/8"-16 Mounting Threads
• ARRI-Style Accessory Threads
• Offset Shoe and Canon Accessory Mounts
• Durable Aluminium Construction

• Flexible accessory positioning
• Non-slip rubber pads
• 289 mm at full extension
• Interchangable components
• Ideal for LCD attachment

• Formfitting, Open-Style Camera Cage
• 1/4"-20 & 3/8"-16 Accessory Threads
• NATO Rail on Side with Safety Pin
• Arca-Type Top Slot & Dovetail Plate
• ARRI-Style Anti-Twist Locating Holes
• Pass-Through Cable Management Side Slot

• For RED KOMODO Camera
• Arca-Swiss Style Top Handle
• Arca-Swiss Style Baseplate
• Single Rod & 15mm LWS Rod Brackets

• Add a Pair of Handgrips to Your Rig
• ARRI-Style Rosette
• Textured Black Rubber Grip
• Secures with M6 Locking Screw

• 1/4"-20 Threads; 15mm LWS Rod Mount
• 3/8"-16 ARRI Accessory Mounts
• Supports Top Handle with Communication
• Doesn't Block XDCA-FX9 Extension Unit

• Attach Camera/Accessory to ARRI Dovetail
• Features multiple slots
• Two 3/8"-16 and two 1/4"-20 low profile screws

• ARRI -Type Rosette
• Textured Black Rubber Grip
• Non-slip handle
• M6-threaded locking lever

• For Wooden Camera Handles, NATOs, Rod Clamps, Shoulder Rigs, etc.
• Collection of common 1/4"-20 screws

• Threaded 1/4-20 & 3/8-16 Holes
• Safety Catch Prevents Camera Detachment
• Stopper screw on one end
• Accessory mounting and tripod attachment

• ARRI standard rosettes
• 1/4"-20 holes for attaching accessories to top
• Pass-through holes to attach to baseplate systems
• Thumbscrew to clamp onto 15mm rods

• Receiver portion only
• Based on standard V-Lock
• Base station can bolt into a 1/4-20 or 3/8-16 hole

• Top Handle Mounts Using 1/4"-20 Screw
• Tightens via Thumbwheel
• Compatible with Canon Accessory Mount
• Multiple 1/4"-20 Mounting Threads
• 3/8"-16 ARRI-Style Accessory Mounts
• Durable Aluminium Construction

• Requires HeadONE for operation
• Transform HeadONE into 2-axis head
• Small and compact
• Captivating and engaging footage

• Fit Your Zip Focus to 15mm LWS Rods
• For Replacement or Adapting

• Utilises ARRI Accessory Mount
• Great for top/side mounting
• Attaches to either a 1/4-20 or 3/8-16

• Auxiliary Shoe for Wooden Camera Rigs
• Non-Electronic Cold Shoe Design
• ARRI Style 3/8"-16 Connection
• Attaches with 1/4"-20 or 3/8"-16 Screw

• 2 x Points of Articulation
• Interchangeable Mounting Knobs
• Removable Anti-Twist Pins
• Compatible 25mm Ball System

• Compact 1" Cube for Mounting Accessories
• 1 x Male 3/8"-16 Mounting Screw
• 5 x Sides with 3/8"-16 Female Threads
• Anti-Twist Divots around Threads

• 3/8"-16 Anti-Twist Mount & 15mm Rod
• Fits 1/4"-20 Anti-Twist Monitor Thread
• Provides 180° Tilt for Optimal Viewing
• Rubber Pad Fits Standard 1/4"-20 Thread

• Utilises ARRI Accessory Mount
• Great for top or side mounting
• Attaches to 1/4-20 or 3/8-16 mounting location