Camera Rigs & Support

• Attach Directly to Either Side of Camera
• NATO Rail for Accessories
• Spring-Loaded Security Pins
• 1/4"-20 and 3/8"-16 Threads

• Protect the camera body
• Easy to disassemble
• Convenient for low-angle shooting
• Monitor mount supports 180 ° pitch
• 360 °panning adjustment
• Lens mount adapter support

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• Top Handle Mounts Using 1/4"-20 Screw
• Tightens via Thumbwheel
• Compatible with Canon Accessory Mount
• Multiple 1/4"-20 Mounting Threads
• 3/8"-16 ARRI-Style Accessory Mounts
• Durable Aluminium Construction

• Protect the camera body
• Easy-to-install V-mount battery
• Top Handle easy to disassemble
• Ergonomic carbon fibre side handle
• Monitor mount supports 180 ° pitch
• 360 ° panning adjustment

• Three-Sided Modular Camera Cage
• 2 Shoe Mounts, 2 NATO Rails on Top Plate
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• HDMI Cable Clamp, Top Bubble Level
• M4 Threads for Optional Lens Support

• Modular Camera Cage with Side Rosettes
• Top Handle with Start/Stop Control
• 501 Baseplate, Extension Arms, Handgrips
• 2 x 12" Long 15mm Rods,
• V-Mount Battery Plate & 15mm Rod Clamp
• Top NATO & Left/Right NATO Safety Rails

• For RED KOMODO
• Quick Release Camera Plate System
• Standard 85mm Lens Height
• ARRI-Standard Dovetail
• 1/4"-20 and 3/8"-16 Threads and Screws
• 15mm LWS Rod Support

• For RED KOMODO
• Quick Release Camera Plate System
• Standard 85mm Lens Height
• ARRI-Standard Dovetail
• 1/4"-20 and 3/8"-16 Threads and Screws
• 15mm LWS Rod Support

• ARRI-Standard Dovetail Bridge Plate
• Quick Release Camera Plate System
• 3.3" Standard Riser Lens Height
• 15mm LWS Rod Support
• 1/4"-20 & 3/8"-16 Camera Screws
• 1/4"-20 & 3/8"-16 Tripod Threads

• Secures to Wooden Camera C70 Accessories
• Canon Accessory Mount Ridges
• 1/4"-20 Threads
• 3/8"-16 ARRI Accessory Mounts

• Designed for Canon C70 Camera
• 15mm LWS Rod Baseplate Support/Riser
• Quick Release Arca-Type Dovetail Plate
• 2 x ARRI Rosettes for Optional Handgrips
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• Vertical Lens Support Post Adapter Port

• Formfitting Cage with ARRI Side Rosettes
• NATO Mount Powered Trigger Top Handle
• Left, Right, and Top NATO Rails
• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1/4"-20 and 3/8"-16 Tripod Threads
• Front Threads for Optional Lens Support

• 2 Shoe Mounts, 2 NATO Rails on Top Plate
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• HDMI Cable Clamp, Top Bubble Level
• M4 Threads for Optional Lens Support
• 1/4"-20 & 3/8"-16 Camera Mounting Screws

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• For C70/6K Pro/URSA Mini/FX6/VENICE
• Quick Release Camera Plate System
• Standard 85mm Lens Height
• ARRI-Standard Dovetail
• 1/4"-20 and 3/8"-16 Threads and Screws
• 15mm LWS Rod Support

• Formfitting Cage with Side Rosettes
• Top Handle with Start/Stop Control
• Universal Quick Release 501 Baseplate
• 2 x 12" Long 15mm Rods
• Modular Cage Design
• Top NATO & Left/Right NATO Safety Rails

• 3-Sided Modular Camera Cage
• V-Mount Battery Plate &15mm Rod Clamp
• ARRI-Style 15mm Bridge Plate
• 2 x Rosette Extension Handgrips
• NATO Clamp Top Handle
• 15" D-Tap to 2.5mm DC Power Cable

• Compatible with Canon EOS C70 Camera
• Blocks Out Extraneous Light
• 2.5x Magnification
• Adjustable Dioptre Range: -2 to +2
• 135° Range of Motion

• Mount on Camera or Cage Via Shoe Mount
• 1/4"-20 and 3/8"-16 Accessory Threads
• 1 x 1/4"-20 with Anti-Twist Divots
• 2 x 3/8"-16 with Anti-Twist Divots
• 2 x Shoe Mounts

• Baseplate with 15mm LWS Rod Support
• Designed for Height of Canon C70
• Compatible with Dovetail Plates
• Use with Tilta to ARRI Baseplate Adapter
• 1/4''-20 & 3/8''-16 Threads on Bottom

• Pass-Through Accessory Top Plate
• Electronic Run/Stop Pass-Through
• Multiple 1/4"-20 Anti-Twist Threads
• Works with Upright Ultra Handle
• Mounts Using 2 x 1/4"-20 Screws

• Access to All Controls, Ports, and Slots
• 1/4"-20 Accessory Mounting Holes
• ARRI Compatible Rosette
• Integrated Shoe Mount on Top
• Integrated Z-Rail with 1/4"-20 Holes
• HDMI Cable Clamp Included

• Formfitting Canon C70 Full Camera Cage
• 15mm LWS Baseplate, 15mm Rods
• 1/4"-20 Anti-Twist Camera Mount
• 1/4"-20 & 3/8"-16 Accessory Threads
• Arca-Type Quick Release Plate on Base

• Protective armour for Canon C70, minimises wear and tear
• Mount accessories via NATO rail, Arri compatible rosette, cold shoe receivers and 1/4"-20 threads with locating pins
• Power and record via the Advanced Power Handle with Run Stop
• ARCA compatible bottom plate allows for quick mounting on DJI RS 2
• Shoot vertically via bottom plate rosette connection for mounting adjustable top handle

• Mounts onto Canon C70 Camera Mount
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 180° Tilting
• Detachable 15mm Rod Clamp Hinge
• Rubber Pad to Fit 3rd Party Monitors

• Accessory Plate for RED KOMODO/KOMODO-X
• Mounts on Left Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Lightweight Aluminium Construction

• Accessory Plate for RED KOMODO/KOMODO-X
• Mounts on Right Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Lightweight Aluminium Construction

• For RED KOMODO/KOMODO-X/V-RAPTOR Camera
• 1 and 4" Ultra Handle Extensions
• 3/8"-16 T-Handle Hex Wrench
• Run/Stop Trigger Control
• 1/4"-20 and 3/8"-16 Accessory Threads
• Compatible with RED Touch 7.0 Monitor

• Attaches to WC Top Plate for Canon C70
• NATO Accessory Rail
• Spring-Loaded Safety Pin on Each End
• 5 x 1/4"-20 & 2 x ARRI 3/8"-16 Threads
• Detachable Cable Clamp

• Adds Clearance to KOMODO Top Mount Kits
• For Kits to Use KipperTie Revolva RF/PL
• Mounts with 2 x 1/4"-20 Screws
• Durable, Lightweight Construction

• Compatible with Most Tiltaing Cages
• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1 x Shoe Mount, 1 x 15mm Rod Support
• Spring-Loaded Locking Thumbscrew
• Aluminium Alloy and Stainless Steel

• Rosette Attachment
• Push-Button Articulation
• Shoe Mount with Safety Pin
• 15mm Rod Port
• 1/4"-20 and 3/8"-16 Threads

• Mounts Z-Finder to Canon EOS C70 Camera
• Provides Precision Placement
• Maintains All Functions
• Mounts Independently of Camera Cages
• Compatible with EVA1 Z-Finder

• Minimises Wear and Tear Over Time
• NATO Rail, Arri Rosette, Cold Shoe and 1/4" Threads
• Supports Rod Based Accessories and Tilta Dovetails
• Includes Advanced Power Handle with Run Stop
• Arca Bottom Plate Allows for Quick Mounting on DJI RS 2

• Universal support for various RF to EF Lens Mount Adapters
• Extra security via an additional point of contact
• Secures adapters without adding extra bulk
• Compatible with the Tilta Full Camera Cage for Canon C70
• Aluminium and steel construction

• Right-Angle D-Tap Connector
• Right-Angle Barrel Connector
• Coiled Cable Expands from 10 to 24" Long

• Accepts C70 Top Handle and Accessories
• Stainless Steel Shoe for Canon Accessory
• 1/4"-20 Threaded Holes on Top and Edge
• 3/8"-16 ARRI Anti-Twist Accessory Holes
• Offset Cold Shoe

• Designed to match the Canon C70 optical center
• Comes with an adapter plate
• Comes with (1 pair) 15 mm 12″ rods
• Integrated HDMI Cable Clamp
• Made of CNC aluminum

• Form fitting top, side and bottom plates
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Top plate compatible with the factory Canon C70 handle
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate

• Form fitting top, side and bottom plates
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate
• Comes with (1 pair) 15 mm 12″ rods

• Form fitting top, side and bottom plates
• L-shaped top handle with Push-Button Technology
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate

• Designed to match the Canon C70 optical center
• Comes with an adapter plate
• Comes with (1 pair) 15 mm 12″ rods
• Integrated HDMI Cable Clamp
• Made of CNC aluminum

• Form fitting top, side and bottom plates
• L-shaped top handle with Push-Button Technology
• Top handle made of CNC aluminum and wooden Canadian maple
• Top plate compatible with the factory Canon C70 handle
• Made of CNC lightweight aluminum

• Add Accessories to Sides of Camera
• Multiple 1/4"-20 and 3/8"-60 Threads
• Mount Optional Rod Clamps or Rosettes
• Integrates with Rear Cage and Top Plates

• For C70/6K Pro/URSA Mini/FX6/VENICE
• Quick Release Camera Plate System
• Standard 85mm Lens Height
• ARRI-Standard Dovetail
• 1/4"-20 and 3/8"-16 Threads and Screws
• 15mm LWS Rod Support

• Modular Camera Cage with Side Rosettes
• Top Handle with Start/Stop Control
• 501 Baseplate, Extension Arms, Handgrips
• V-Mount Battery Plate, 15mm Rod Clamp
• 2 x 12" Long 15mm Rods
• Top NATO & Left/Right NATO Safety Rails

• Formfitting Cage with ARRI Side Rosettes
• NATO Mount Powered Trigger Top Handle
• Left, Right, and Top NATO Rails
• 1/4"-20 and Anti-Twist 3/8"-16 Threads
• 1/4"-20 and 3/8"-16 Tripod Threads

• Canon C70 Cage - a lightweight cage designed for the Canon C70.
• ACT Baseplate- an arca-swiss compatible baseplate and shoulder pad
• Tactical Handle and Right Trigger Grip
• Axis Micro- an evf mount that attaches rosette based EVFs to your rig via a 15mm rod port
• Kameleon PRO EVF - a high quality, professional, HDMI, & SDI micro OLED EVF

• 3-Sided Modular Camera Cage
• V-Mount Battery Plate &15mm Rod Clamp
• ARRI-Style 15mm Bridge Plate
• 2 x Rosette Extension Handgrips
• NATO Clamp Top Handle
• 15" D-Tap to 2.5mm DC Power Cable