Camera Rigs & Support

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• Top Handle Mounts Using 1/4"-20 Screw
• Tightens via Thumbwheel
• Compatible with Canon Accessory Mount
• Multiple 1/4"-20 Mounting Threads
• 3/8"-16 ARRI-Style Accessory Mounts
• Durable Aluminium Construction

• Three-Sided Modular Camera Cage
• 2 Shoe Mounts, 2 NATO Rails on Top Plate
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• HDMI Cable Clamp, Top Bubble Level
• M4 Threads for Optional Lens Support

• Secures to Wooden Camera C70 Accessories
• Canon Accessory Mount Ridges
• 1/4"-20 Threads
• 3/8"-16 ARRI Accessory Mounts

• Designed for Canon C70 Camera
• 15mm LWS Rod Baseplate Support/Riser
• Quick Release Arca-Type Dovetail Plate
• 2 x ARRI Rosettes for Optional Handgrips
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• Vertical Lens Support Post Adapter Port

• 2 Shoe Mounts, 2 NATO Rails on Top Plate
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads
• HDMI Cable Clamp, Top Bubble Level
• M4 Threads for Optional Lens Support
• 1/4"-20 & 3/8"-16 Camera Mounting Screws

Three-Sided Modular Camera Cage 2 Shoe Mounts, 2 NATO Rails on Top Plate LANC Top Handle with NATO Clamp; 15mm Rod Port 1/4"-20 & 3/8"-16 ARRI Accessory Threads HDMI Cable Clamp, Top Bubble Level

• For C70/6K Pro/URSA Mini/FX6/VENICE
• Quick Release Camera Plate System
• Standard 85mm Lens Height
• ARRI-Standard Dovetail
• 1/4"-20 and 3/8"-16 Threads and Screws
• 15mm LWS Rod Support

• Compatible with Canon EOS C70 Camera
• Blocks Out Extraneous Light
• 2.5x Magnification
• Adjustable Dioptre Range: -2 to +2
• 135° Range of Motion

• Baseplate with 15mm LWS Rod Support
• Designed for Height of Canon C70
• Compatible with Dovetail Plates
• Use with Tilta to ARRI Baseplate Adapter
• 1/4''-20 & 3/8''-16 Threads on Bottom

• Access to All Controls, Ports, and Slots
• 1/4"-20 Accessory Mounting Holes
• ARRI Compatible Rosette
• Integrated Shoe Mount on Top
• Integrated Z-Rail with 1/4"-20 Holes
• HDMI Cable Clamp Included

• Formfitting Canon C70 Full Camera Cage
• 15mm LWS Baseplate, 15mm Rods
• 1/4"-20 Anti-Twist Camera Mount
• 1/4"-20 & 3/8"-16 Accessory Threads
• Arca-Type Quick Release Plate on Base

• Protective armour for Canon C70, minimises wear and tear
• Mount accessories via NATO rail, Arri compatible rosette, cold shoe receivers and 1/4"-20 threads with locating pins
• Power and record via the Advanced Power Handle with Run Stop
• ARCA compatible bottom plate allows for quick mounting on DJI RS 2
• Shoot vertically via bottom plate rosette connection for mounting adjustable top handle

• Includes 15mm rod locks
• Integrated NATO Rail
• Mount Sony or Zacuto Handle to Burano

• Reposition Original BURANO EVF
• Thin, Flat Mounting Plate
• Works with Bolt-On Accessory Clamp
• Includes Four 2.4" Accessory Rails

• Mount Accessories onto your BURANO Rig
• Cheese-Style Mounting Plate
• Flat Plate Measures 3.5 x 2"
• Multiple 1/4"-20 and 3/8"-16 Threads
• Anti-Twist Divots around Each Thread
• Durable Aluminium Construction

• Accessory Side Plates for Sony BURANO
• Mount on Left & Right Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Plates Mount with Top Plate & Baseplate
• Lightweight Aluminium Construction

• Standard Sony Rosette Extends Mount
• Extend BURANO Rosette Past the Side Rail
• Allows Rosette Usage with Cage System
• Mount Handgrip or Remote Control Grip

• Add 15mm Rods to Top Front of BURANO
• Requires Top Plate for BURANO
• Additional 3/8"-16 Mounting Threads
• Works with Optional EVF System
• Durable Aluminium Construction

• Add Hook-and-Loop Accessories to BURANO
• Metal Plate with Hook-and-Loop Surface
• Mounts on Camera Side with 2 x M3 Screws
• Etched Labels for Nearby Ports
• Thin, Lightweight Design

• Accessory Plate for Sony BURANO
• Mounts on Right Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Mounts onto Top Plate/Baseplate Options
• Lightweight Aluminium Construction

• Accessory Plate for Sony BURANO
• Mounts on Left Side of Camera
• 1/4"-20 & 3/8"-16 Anti-Twist Threads
• Sensor Plane Markings
• Mounts onto Top Plate/Baseplate Options
• Lightweight Aluminium Construction

• 2-Plate Design Works with FX9 Top Handle
• Multiple 1/4"-20 & 3/8"-16 Threads
• Works with Front Dual-Rod Clamp
• Compatible with EVF System

• Baseplate System, Top Plate System
• Side Rail Set, Side Hook-and-Loop Plate
• Complete Ultra Handle Sset, EVF System
• Rosette Standoff, EVF Rail Extension
• Bolt-On Accessory Plate

• Designed for Sony Burano
• Secure connection
• Dovetail compatible
• Lightweight and durable

• Designed for Sony Burano
• Compatible with original top handle
• EVF mount included
• Extendable design
• Lightweight construction

• Designed for BURANO 8K
• Multiple mounting points
• V-mount battery plate
• 15mm baseplate
• EVF bracket

• Mounts onto Canon C70 Camera Mount
• Designed to Fit Smart 5 Locating Pins
• 1/4"-20 Monitor Screw Mount
• 180° Tilting
• Detachable 15mm Rod Clamp Hinge
• Rubber Pad to Fit 3rd Party Monitors

• Attaches to WC Top Plate for Canon C70
• NATO Accessory Rail
• Spring-Loaded Safety Pin on Each End
• 5 x 1/4"-20 & 2 x ARRI 3/8"-16 Threads
• Detachable Cable Clamp

• Designed for Sony BURANO
• Multiple mounting points
• Side mounting plate
• 15mm baseplate
• Top plate

• Designed for Sony Burano
• Multiple mounting points
• Side mounting plate
• 15mm baseplate
• EVF bracket

• Canon C70 Cage - a lightweight cage designed for the Canon C70.
• ACT Baseplate- an arca-swiss compatible baseplate and shoulder pad
• Tactical Handle and Right Trigger Grip
• Axis Micro- an evf mount that attaches rosette based EVFs to your rig via a 15mm rod port
• Kameleon PRO EVF - a high quality, professional, HDMI, & SDI micro OLED EVF

• Mounts Z-Finder to Canon EOS C70 Camera
• Provides Precision Placement
• Maintains All Functions
• Mounts Independently of Camera Cages
• Compatible with EVA1 Z-Finder

• Dedicated 15mm LWS Baseplate
• Attaches directly underneath camera
• Pair of 12’’ rods included
• Mounting threaded holes
• Made of CNC aluminium

• For Sony Burano
• Standalone installation
• Two-piece design plate
• Multiple points of attachment
• Made of CNC aluminium

• For Sony Burano
• Dedicated 15mm LWS baseplate
• Multiple points of attachment
• Pair of 12’’ rods included
• Made of CNC aluminium

• Minimises Wear and Tear Over Time
• NATO Rail, Arri Rosette, Cold Shoe and 1/4" Threads
• Supports Rod Based Accessories and Tilta Dovetails
• Includes Advanced Power Handle with Run Stop
• Arca Bottom Plate Allows for Quick Mounting on DJI RS 2

• Universal support for various RF to EF Lens Mount Adapters
• Extra security via an additional point of contact
• Secures adapters without adding extra bulk
• Compatible with the Tilta Full Camera Cage for Canon C70
• Aluminium and steel construction

• Right-Angle D-Tap Connector
• Right-Angle Barrel Connector
• Coiled Cable Expands from 10 to 24" Long

• Accepts C70 Top Handle and Accessories
• Stainless Steel Shoe for Canon Accessory
• 1/4"-20 Threaded Holes on Top and Edge
• 3/8"-16 ARRI Anti-Twist Accessory Holes
• Offset Cold Shoe

• Designed to match the Canon C70 optical center
• Comes with an adapter plate
• Comes with (1 pair) 15 mm 12″ rods
• Integrated HDMI Cable Clamp
• Made of CNC aluminum

• Form fitting top, side and bottom plates
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Top plate compatible with the factory Canon C70 handle
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate

• Form fitting top, side and bottom plates
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate
• Comes with (1 pair) 15 mm 12″ rods

• Form fitting top, side and bottom plates
• L-shaped top handle with Push-Button Technology
• Several anti rotating threaded holes (3/8-16, ¼-20)
• Made of CNC lightweight aluminum
• Mounting holes for securing the camera to a tripod plate

• Designed to match the Canon C70 optical center
• Comes with an adapter plate
• Comes with (1 pair) 15 mm 12″ rods
• Integrated HDMI Cable Clamp
• Made of CNC aluminum

• Form fitting top, side and bottom plates
• L-shaped top handle with Push-Button Technology
• Top handle made of CNC aluminum and wooden Canadian maple
• Top plate compatible with the factory Canon C70 handle
• Made of CNC lightweight aluminum

• Designed for Sony Burano camera
• Next Generation Recoil rig
• Adjusts for proper balance

• Mount B-Box onto Sony BURANO
• Mounts onto B-Box with 2 x Screws
• Mounts on Top Plate with 3/8"-16 Screw
• Compact, Low-Profile Design

• Reposition Sony BURANO EVF
• EVF Plate, Bolt-On Rail Clamp
• Swivel Arm with Rail Clamp
• 15mm Rod Clamp

• Arca-Type Baseplate for Sony BURANO
• Low-Profile Arca-Type Riser Plate
• 15mm LWS Rod Clamps
• Works with Standard ARRI Bridges Plates
• 3/8"-16 Anti-Twist Mounting Threads