Video

• Supports Monitors up to 9"(22.9 cm)
• Constant Friction System
• Mounts on Either Side of Camera
• Mounts to Standard Hot Shoe
• 1/4"-20 Mounting Screw

• Smooth Automatic Pan and Tilt Head
• 20 lb Maximum Load
• Use on Tripod or SliderPLUS PRO
• Manual or Smartphone App Control

• Attaches Two HeadONE Units Together
• Enables Both Pan and Tilt Motion
• 7 lb Capacity

• Locks Down Quickly
• Load Capacity: 3 kg
• 1/4"-20 Mounting Thread and Screw
• Tool-Less Operation
• Aluminium & Stainless Steel Construction

• For the Edelkrone JibONE
• Protects Against Dust/Scratches/Impacts
• 2 x Interior Accessory Compartments
• Adjustable Shoulder Strap
• Built-In Hand Strap

Provides Stop-Motion Capability, Supports Shoot-Move-Shoot, Integrated Focus Adjustment Knob, Supports Dragonframe Software, USB Power

• Custom-Designed Soft Case
• Fits SliderPLUS Compact
• Zipper Closure
• Adjustable Shoulder Strap

• For Lenses with 25 to 110mm Diameter
• Standard 0.8 Mod / 32 Pitch Gearing
• Works with Most Follow Focuses

• For Select Stabilizers and Sliders
• Drives the Slide Motion
• Powers Head & Focus Modules
• Standalone Operation

• Battery Power for the HeadPLUS
• Single Gold Mount Battery Plate
• Two D-Tap Ports to Power Accessories

• Coreless DC Motor
• Silent Operation
• Requires Head Module & Slide Module

• For Mounting Camera Accessories
• Mount 19mm accessories

• Handhold Your Director's Monitor
• Carbon Fibre Handgrips and Rods
• Swing-Away Access, Neck Strap
• For Odyssey, SmallHD, TVLogic Monitors
• Mount a V-Mount/Gold Mount Battery Plate

• Fully Motorised, Self-Levelling Tripod
• 8kg Lifting, 30kg Carrying Capacity
• 3m per Minute Vertical Adjustment
• 3-Section Legs, 33cm to 1.5m Adjustable Height
• 3/8"-16 Stud for Flat-Base Video Mounts
• Included GBA-Type Battery & Charger

Dual-Length Slider with Movable Rails, 1.3' with 15 lb Payload Tripod Mounted, 0.7' with 50 lb Payload Surface Mounted, Lockable Fold-Out Legs

• Smooth, Automatic Pan and Tilt Head
• 9 kg Maximum Load
• Use on Tripod, SliderPLUS, DollyPLUS
• Manual or Smartphone App Control
• Record and Replay Motion

• For edelkrone Motion-Controlled Devices
• Control Devices without an App
• Wired up to 40 m, Wireless up to 25 m
• 3 x Programmable Buttons
• 3.5mm Link Connector for Wired Control

• Brushless Lens Motor
• For Hard-Stop & Infinity Lenses
• Standard 0.8 MOD Cine Gear
• Works with HeadPLUS/HeadPLUS PRO v1 & v2
• Ultra Hi-Res Encoder

• Clamp-On Rubber Matte Box/Sunshade
• For 90-95mm Outside-Diameter Lenses
• Accepts Up to Two 101.6 x 143.5 mm Filters
• Wide Design Prevents Vignetting
• Durable Rubber and Stainless Steel

• NATO Standard Rail
• For Mounting NATO-Compatible Accessories
• Spring-Loaded Safety Stops on Each End

• Protective, Open-Style Camera Cage
• Keeps Camera Handgrip Accessible
• 1/4"-20 & 3/8"-16 Accessory Threads
• Right-Angle HDMI Adapter & HDMI Clamp
• ARRI-Style Anti-Twist Locating Holes

• Adapts V-Mount V-RAPTOR to V-Mount
• For Micro & Full-Size Batteries
• 2 x D-Tap Output Ports
• 3.8A E-Fuse with Reset Button
• Camera Stays Running If Voltage Exceeded
• Durable Anodised Aluminium Build

• Manual Follow Focus for 15mm & 19mm Rods
• Movable Body Design—Use on Either Side of Camera
• Smooth & Backlash-Free Operation
• Ultra-Precise & Pen-Free Focus Marking
• Custom Focus Wheel Sensitivity

• For Canon LP-E6-Type Batteries.
• Uses 2 x Batteries in Parallel.
• For Slide Module v2.
• For HeadPLUS or HeadPLUS PRO.
• For DollyPLUS or DollyPLUS PRO.

• Attach Directly to Either Side of Camera
• NATO Rail for Accessories
• Spring-Loaded Security Pins
• 1/4"-20 and 3/8"-16 Threads

• IDX V-Mount
• 12V power
• D-Tap connectors

• Attaches to Rear of FX6 Camera
• Supports V-Mount Battery
• Access to BP-U Battery Allows Hot Swaps
• 3 x D-Tap Ports, Protective Digital Fuse

• Pivots and Adjusts to Fit Most Lenses
• 1:1 Gear Ratio
• 0.8 MOD and Friction Drive Gears
• Includes 2 Standard Marking Disks
• Hard-Stop Disk for DSLR Lenses

• Top Plate for Sony FX6
• Unified Baseplate with 15mm Rod Clamps
• 15mm Rod Pair, 15" Long
• 12" Long Safety Dovetail Plate
• V-Mount Battery Plate

• Cheese Plate Attaches to Top of Camera
• 1/4"-20 and 3/8"-16 Tapped Holes
• 3/8"-16 ARRI Accessory Mounts

• Covers 6-7" Monitor Screens (Diagonal)
• Fits RED 7" Touchscreen & LCD Monitors
• Four-Sided Coverage
• Flexible Bottom Area for Button Access

• 4.5 to 6.7" Telescopic Extension Arm
• 2 x ARRI-Standard Rosettes
• Thumb-Lever Fasteners
• Use to Extend Separate Handgrip

• Top Plate for Sony FX6
• Unified Baseplate with 15mm Rod Clamps
• 15mm Rod Pair, 12" Long
• 8" Long Safety Dovetail Plate

• Extends 25.4 cm to 56 cm
• RoHS compliant
• Ideal for mobility and configurations

• Covers 10-13 cm Monitor Screens (Diagonal)
• Fits RED 4.7" & 5" Touchscreen Monitors
• Four-Sided Coverage
• Flexible Bottom Area for Button Access

• Works with WC Unified Baseplate Systems
• Dovetail Top & Shoulder Pad Bottom
• Two ARRI Rosettes for Handgrips
• Multiple 1/4"-20 & ARRI Accessory Mounts
• Lightweight Aluminium Composition

• For 19mm & 15mm Studio Offset Rods
• 3/8"-16 and 1/4"-20 Screws
• Y-Bracket with Rollers for DSLR Lenses
• Vertical & Horizontal Adjustments
• Small & Large Support Extensions

• 1/4-20 threaded hole on the bottom
• LPL Cap included to prevent dust from entering sensor area when lens is not attached

• Accepts V-Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

• V-Mount Battery Distribution Box
• Fits Between Battery & Camera Mount
• 2x 2-Pin LEMO-Compatbile Outputs
• 2x D-Tap Outputs
• 5V USB Output

• Attaches to the Rear of the Camera.
• Supports V-Mount Battery.
• Access to BP-U Battery Allows Hot Swaps.
• 3 D-Tap Ports & Protective Digital Fuse.

• Accepts Gold Mount Batteries
• For RED KOMODO Camera
• D-Tap Accessory Port

• Top Cheese Plate for Canon C70
• 1/4"-20 and 3/8"-16 Mounting Threads
• ARRI-Style Accessory Threads
• Offset Shoe and Canon Accessory Mounts
• Durable Aluminium Construction

• Flexible accessory positioning
• Non-slip rubber pads
• 289 mm at full extension
• Interchangable components
• Ideal for LCD attachment